Compression Testing Machine Dealers in Inderlok, Delhi

We are reckoned as the prime digital compression testing machine manufacturer, exporter and supplier in india. Our digital compression testing machine is provided with a pace rate indicator, which indicates pace rate on a bar graph. The pace rate can also be manually adjusted while the test is going on. comprises of loading unit : the loading unit is of fully welded construction having a cross head, base and solid plates. The hydraulic jack is fixed to the base. The platens of the machine are hardened, ground and polished. The upper platen is provided with self-aligning action. To facilitate testing of various size specimens, suitable size spacers are provided complete with ball seating arrangement.pumping unit : the two speed pump facilitates rapid approach of the platens for daylight closure and also provides comprehensive control over the application of load. A control valve provides fine control over the loading rate for accuracy of pacing. the digital read-out unit, incorporates a 4-digit display, calibrated in kn and features integral load pacing in kn/sec. Maximum load is held and retained for approx 15 min, unless cancelled, using the panel mounted reset switch. Pace rate set for running the test can be maintained manually with the help of a bar graph indicator. Logged data printing facility through a parallel port interface is provided in the machine. Readings upto 100 complete runs/tests can be stored in the memory.

• Type: Compression Testing Machine
• Application: Testing Material
• Weight: 100-200kg, 200-300kg
• Voltage: 110V, 220V, 380V
• Automatic Grade: Automatic, Fully Automatic, Semi Automatic
• Driven Type: Electric, Mechanical
• Warranty: 1year

The Compression Testing Machine is manufactured using advanced technology. Our gamut of Compression Testing Machine is widely used across various industries.The Compression Testing Machine has a high efficiency and durability. Known For : Rust free High tensile strength Longer life Dimensional accuracy Easy to use Used for checking compression of Cement mortar Concrete Brick Specifications : Capacity : 100 Tonnes Size : 15 cm x 15 cm x 15 cm Cylinder size : 15 cm dia. x 30 mm height

• Material: Metal
• Color: Metallic, Silver
• Application: Industrial
• Surface Finshing: Polished
• Resistivity: Rust Resistant

Hand Operated:Proving ring type. Comprises of a hand operated load frame, cap. 30KN (3000 kgf.) screw jack for loading, handle and strain dial gauge bracket, adaptor for proving ring, conical seats and male/female coning tools for 38 mm dial samples. Supplied without proving ring and dial gauge. Motorized: Comprises a screw operated load frame capacity 50 KN (5000 kgf.) with a gear box and motor drive giving 1.25, 1.5 and 2.5mm/min, rates of strain, pair of cone seating, adaptor for proving ring and strain dial gauge bracket. Supplied with one pair of male/female coning tools for 38 mm dia samples but without proving ring and dial gauge. Suitable for operating on 230 volts, single phase AC Supply. 

• Capacity: 100 ton
• Power Supply: Digital
• Driven Type: Hydraulic
• Color: Blue, Grey
• Condition: New
• Automatic Grade: Automatic, Digital

We bring forth highly efficient Compression Testing Machine that embodies a hydraulic system designed to meet the requirement of IS 516-1959. It is designed for doing compression tests on concrete cubes up to 15cm X 15cm X 15cm and also concrete cylinders up to 30cm height. We design our Compression Testing Machine using high quality components, which provide them long service life. Compression Testing Machine manufactured by our company has many profitable features, which make it highly demandable for various industrial and laboratory activities. Loading Unit The hydraulic jack is fixed to base. The upper platen has got a self-aligning action and is attached to a screw which passes through the cross-head plate, and can be raised or lowered for initial clearance adjustment. The lower platen rests on the jack ram and is positioned with the help of a centering pin. Loading is accomplished by the upward movement of the lower platen. A dust cover is provided on the jack to prevent any dust from going into the cylinder. A spacer with a centering locating pin is provided to test small specimens. The lower and upper platens of the machine are hardened, ground and polished. Guidelines are marked on the lower platen to keep the specimen coaxial with the hydraulic jack. Pumping Unit The motorized pumping unit, which is housed in an elegant console is of double plunger type and is driven by a single phase 220 Volts 50 cycles electric motor. The pumping unit is a separate unit connected to the jack by means of a rubber hose pipe. A junction box is suitably fixed to connect the motor to the mains through a push button starter. The pumping unit is fitted with a 20cm diametermeter diameterl hydraulic pressure gauge calibrated by N.C.B.M. A max red pointer is provided to facilitate taking readings after failure of the specimen. The pressure gauge is fixed at an angle for easy readability. The machine is fitted with a hand wheel control which enables the rate of application of load to be varied. âThe machine is equipped with facilities for hand pumping in case of power failure.â The electric pumping unit is fixed with a micro-switch to switch-off the motor automatically as the load on the machine approaches the rated capacity. Relays are incorporated in the pumping unit so that in case of breakdown of power supply, the motor will stop and will not re-start unless the starting switch is operated. Features of Load Indicator Aesthetically designed front panel with membrane switches. Separate displays for load indication and maximum range. Peak/Normal mode selectable. Configuration lock at rear to prevent tampering with range. Specifications Range : 1KN to 9999. Load : 1KN to Range Set Load (limit) : 1KN to 9999 Accuracy : ± 0.1% of full scale ± 1 digit Capacities available : 10 tonnes, 25 tonnes, 50 tonnes, 100 tonnes, 200 tonnes.

• Application: Cube Testing
• Weight: 600
• Color: Yellow
• Voltage: 230 V
• Driven Type: Electric
• Warranty: 1year
• Automation Grade: Semi Automatic
• Country of Origin: India
• Type: Cube Testing Machine
• Power: 1-3kw

The Digital Compression Testing Machine has been designed to meet the need for a simple, economic and reliable means to test concrete for its compressive strength. The Digital Indicator incorporates a 4-Digits display calibrated in Kilo Newton (KN) and preset to maximum load capacity fitted with micro switches to switch-off the motor when the load approaches the maximum capacity of the gauge, avoiding any over loading. Relays are incorporated so that the motor does not restart on its own after a power breakdown. The electrically operated pumping units are provided with a control knob to adjust the pace rate which can be effectively controlled by an experienced operator during the course of testing, by observing the progress of the Digital Indicator readings. Optional: 1. Ranges: 50 kN to 3000 kN 2. Channel and Pillar Type Both Are Available. 3. Extra gauges can be attached to the machine (max. 1 nos. ) 3. Electrical connection can either be Single Phase on 220 V A.C., or 3 Phase 440 V A.C.

• Country of Origin: India
• Type: Fully Automatic Compression Cube testing Machine-
• Certification: CE Certified
• Weight: 1000-2000kg
• Voltage: 220V
• Condition: New
• Automatic Grade: Fully Automatic
• Power: 1-3kw
• Driven Type: Electric
• Warrenty: 1year

• Model: ASI-250 PC
• Max vertical daylight, mm: 200 to 400
• Horizontal daylight, mm: 220 to 275
• Max piston stroke, mm: 50
• Platen dimensions: 200 mm dia.
• Platen surface hardness: 55.5 HRC (600 HV)
• Platen flatness tolerance: 0.03 mm
• Weight Approx. (Kg): 200 to 300
• Pace Rate Control: Automatic Pace Rate control.
• Display: Colour Touch Screen
• Pump: Dual Stage Hydraulic

We at Testing Equipments in india Manufacture Highly Efficient Compression Testing Machine. We Manufacture Automatic Compression testing machine, Analogue Testing Equipments, Digital Testing Equipments etc. Compression Testing Machine Generally Use to test the quality of concrete. Strength of concrete is obtained by crushing the specimen in form of cubes or cylinders. To More Specification visit our online e catalogue.

• Brand Name: SISCO INDIA
• Automatic Grade: Semi-Automatic
• Color: variable
• Usage/Application: Soil Testing
• Display Type: Digital
• I Deal In: New Only

• Application: Compression testing
• Automation Grade: Automatic
• Brand Name: Vertex
• Display Type: Digital
• Material: Stainless Steel,Metal
• Piston Stroke: 215.00 mm
• Standard: IS 14858(2000)
• Display: Digital
• Platen Size: 220 mm sq.
• Minimum Order Quantity: 1 Set

Compression Testing Machine, Digital Compression Testing Machine

Compression Testing Machine, asphalt cutting machine, Groove Cutting Machine

Unconfined Compression Testing Machine, IZOD IMPACT TESTING MACHINE

Compression Testing Machines, compressor testing machine

Compression Testing Machines, Baling Press, Pet Bottle Shredder

box compression testing machines, Universal Testing Machines