Compression Testing Machine Dealers in Tri Nagar, Delhi

• Application: Cube Testing
• Weight: 600
• Color: Yellow
• Voltage: 230 V
• Driven Type: Electric
• Warranty: 1year
• Automation Grade: Semi Automatic
• Country of Origin: India
• Type: Cube Testing Machine
• Power: 1-3kw

• Capacity: 100 ton
• Power Supply: Digital
• Driven Type: Hydraulic
• Color: Blue, Grey
• Condition: New
• Automatic Grade: Automatic, Digital

We bring forth highly efficient Compression Testing Machine that embodies a hydraulic system designed to meet the requirement of IS 516-1959. It is designed for doing compression tests on concrete cubes up to 15cm X 15cm X 15cm and also concrete cylinders up to 30cm height. We design our Compression Testing Machine using high quality components, which provide them long service life. Compression Testing Machine manufactured by our company has many profitable features, which make it highly demandable for various industrial and laboratory activities. Loading Unit The hydraulic jack is fixed to base. The upper platen has got a self-aligning action and is attached to a screw which passes through the cross-head plate, and can be raised or lowered for initial clearance adjustment. The lower platen rests on the jack ram and is positioned with the help of a centering pin. Loading is accomplished by the upward movement of the lower platen. A dust cover is provided on the jack to prevent any dust from going into the cylinder. A spacer with a centering locating pin is provided to test small specimens. The lower and upper platens of the machine are hardened, ground and polished. Guidelines are marked on the lower platen to keep the specimen coaxial with the hydraulic jack. Pumping Unit The motorized pumping unit, which is housed in an elegant console is of double plunger type and is driven by a single phase 220 Volts 50 cycles electric motor. The pumping unit is a separate unit connected to the jack by means of a rubber hose pipe. A junction box is suitably fixed to connect the motor to the mains through a push button starter. The pumping unit is fitted with a 20cm diametermeter diameterl hydraulic pressure gauge calibrated by N.C.B.M. A max red pointer is provided to facilitate taking readings after failure of the specimen. The pressure gauge is fixed at an angle for easy readability. The machine is fitted with a hand wheel control which enables the rate of application of load to be varied. âThe machine is equipped with facilities for hand pumping in case of power failure.â The electric pumping unit is fixed with a micro-switch to switch-off the motor automatically as the load on the machine approaches the rated capacity. Relays are incorporated in the pumping unit so that in case of breakdown of power supply, the motor will stop and will not re-start unless the starting switch is operated. Features of Load Indicator Aesthetically designed front panel with membrane switches. Separate displays for load indication and maximum range. Peak/Normal mode selectable. Configuration lock at rear to prevent tampering with range. Specifications Range : 1KN to 9999. Load : 1KN to Range Set Load (limit) : 1KN to 9999 Accuracy : ± 0.1% of full scale ± 1 digit Capacities available : 10 tonnes, 25 tonnes, 50 tonnes, 100 tonnes, 200 tonnes.

• Material: Metal
• Color: Metallic, Silver
• Application: Industrial
• Surface Finshing: Polished
• Resistivity: Rust Resistant

Hand Operated:Proving ring type. Comprises of a hand operated load frame, cap. 30KN (3000 kgf.) screw jack for loading, handle and strain dial gauge bracket, adaptor for proving ring, conical seats and male/female coning tools for 38 mm dial samples. Supplied without proving ring and dial gauge. Motorized: Comprises a screw operated load frame capacity 50 KN (5000 kgf.) with a gear box and motor drive giving 1.25, 1.5 and 2.5mm/min, rates of strain, pair of cone seating, adaptor for proving ring and strain dial gauge bracket. Supplied with one pair of male/female coning tools for 38 mm dia samples but without proving ring and dial gauge. Suitable for operating on 230 volts, single phase AC Supply. 

• Type: Compression Testing Machine
• Application: Testing Material
• Weight: 100-200kg, 200-300kg
• Voltage: 110V, 220V, 380V
• Automatic Grade: Automatic, Fully Automatic, Semi Automatic
• Driven Type: Electric, Mechanical
• Warranty: 1year

The Compression Testing Machine is manufactured using advanced technology. Our gamut of Compression Testing Machine is widely used across various industries.The Compression Testing Machine has a high efficiency and durability. Known For : Rust free High tensile strength Longer life Dimensional accuracy Easy to use Used for checking compression of Cement mortar Concrete Brick Specifications : Capacity : 100 Tonnes Size : 15 cm x 15 cm x 15 cm Cylinder size : 15 cm dia. x 30 mm height

• Model: ASI-250 PC
• Max vertical daylight, mm: 200 to 400
• Horizontal daylight, mm: 220 to 275
• Max piston stroke, mm: 50
• Platen dimensions: 200 mm dia.
• Platen surface hardness: 55.5 HRC (600 HV)
• Platen flatness tolerance: 0.03 mm
• Weight Approx. (Kg): 200 to 300
• Pace Rate Control: Automatic Pace Rate control.
• Display: Colour Touch Screen
• Pump: Dual Stage Hydraulic

• Brand Name: SISCO INDIA
• Automatic Grade: Semi-Automatic
• Color: variable
• Usage/Application: Soil Testing
• Display Type: Digital
• I Deal In: New Only

Compressive Strength The failure loads of mortar cubes can vary considerably according to the type of cement and the period of curing. However, a capacity between 50 kN and 500 kN encompasses the majority of test conditions. A 500 KN Compression Testing Machine is suitable for testing mortar cubes, cement mortar and pozzolana cubes of 50 mm. For details see under SCO-1040. SCE-1003 Flexural Strength4 kN Flexure strength Testing Machine,Electrically Operated,IS: 1727, 4031For the Transverse test of pozzolana and cement mortar prisms (Rilem Cembureau test) by single point loading of a 60 mm long prism supported at 100 mm centers. Smaller loads, less than 10 N, can be applied and measured with an accuracy of 1% in the upper four-fifths of the range. The load is increased at the rate of 40- 60 N/sec. Supplied complete with: Proving ring of capacity 4KN and Flexure Test Attachment. Gauging TrowelIS: 4031, IS: 5515 SCE-1004 Gauging Trowel, IS: 5515,200 mm long blade Weight 210 ± 10 g SCE-1005 Gauging Trowel, IS: 4031, 150 mm long blade with straight edge. Weight 210 ± 10 g SCE-1006 Gillmore Needle ApparatusASTM C 91, C414, C266, AASHO T154 For determining setting time of hydraulic cement. The apparatus consist of a base plate with a vertical shaft and two horizontal arms, the lower arm being adjustable for height. Supplied complete with one initial needle, one final needle and a base plate. Replacement Parts SCE-1006001 Initial Needle 1/12-inch dia. ¼ lb. wt. SCE-1006002 Final Needle 1/24-inch dia. 1lb.wt. SCE-1006003 Glass base plateJaw Crusher Designed to speed-up crushing of aggregates, Ores, Mineral, Coal and similar materials Compact and rugged for laboratory and small production units Manganese steel jaws adjustable for 6 mm opening Supported with strong steel frame SCE-1007 Jaw Crusher of 12 SCE-1008 Jaw Crusher of 6The specification is as follows.1. Single Toggle Jaw crusher size 4" x 6".2. Motor 3 hp /3phase/415 volt/50 cycle. 3. Jaws Speed 350 rpm 4. Jaws 10-12 Mn steel. 5. Bearing Bush type 6. Feed size 25 - 30 mm 7. Product Size 6-20 mm 8. Capacity 200 - 250 kg /Hour SCE-1009 Jolting Apparatus IS: 10078, 1982The jolting apparatus consists of a rectangular table, rigidly connected by two support arms to spindle at a horizontal distance of 800 mm from the center of the table. The table can be raised and allowed to fall freely by a cam, which is connected to a motor. The cam rotates at a rate of 60 rpm. A stroke counter, fitted with micro switch, is provided, which stops the machine after 60 jolts. Locating pins are provided for mounting the mould compartments on the table. The mould, surrounded by the hopper, can be clamped rigidly to the table. Supplied complete with mould and hopper. Suitable for operation with 230 V, 50 cycles, single phase, AC Supply.

• Application: Compression testing
• Automation Grade: Automatic
• Brand Name: Vertex
• Display Type: Digital
• Material: Stainless Steel,Metal
• Piston Stroke: 215.00 mm
• Standard: IS 14858(2000)
• Display: Digital
• Platen Size: 220 mm sq.
• Minimum Order Quantity: 1 Set

We are reckoned as the prime digital compression testing machine manufacturer, exporter and supplier in india. Our digital compression testing machine is provided with a pace rate indicator, which indicates pace rate on a bar graph. The pace rate can also be manually adjusted while the test is going on. comprises of loading unit : the loading unit is of fully welded construction having a cross head, base and solid plates. The hydraulic jack is fixed to the base. The platens of the machine are hardened, ground and polished. The upper platen is provided with self-aligning action. To facilitate testing of various size specimens, suitable size spacers are provided complete with ball seating arrangement.pumping unit : the two speed pump facilitates rapid approach of the platens for daylight closure and also provides comprehensive control over the application of load. A control valve provides fine control over the loading rate for accuracy of pacing. the digital read-out unit, incorporates a 4-digit display, calibrated in kn and features integral load pacing in kn/sec. Maximum load is held and retained for approx 15 min, unless cancelled, using the panel mounted reset switch. Pace rate set for running the test can be maintained manually with the help of a bar graph indicator. Logged data printing facility through a parallel port interface is provided in the machine. Readings upto 100 complete runs/tests can be stored in the memory.

Compression Testing Machine, asphalt cutting machine, Groove Cutting Machine

box compression testing machines, Universal Testing Machines