Compressor Spare Parts Dealers in Chandni Chowk, Delhi

The Compressor Wheel, which we offer, is manufactured as per the set industrial norms. We offer the best Compressor Wheel at the best rates to the clients. We are ranked among the dependable Manufacturers, Suppliers and Exporters of Compressor Wheel, based in Delhi. Minimum Order Quantity : Sample Order One Carton

Our company is counted among the eminent Manufacturers, Exporters and Suppliers of Compressor Piston Rings. The Piston Rings we make available are manufactured in adherence with set industrial norms. With a view to cater the bulk and urgent requirements of the buyers, we maintain a large stock of the rings in our spacious warehouse.   More Details : Apart from available range of Piston Rings our expertise team can develop & manufacture of Discharge and Piston Rings according to the design parameters, drawings & samples.Grasso : RC 11 Series : RC 211, RC 311, RC 2111, RC 411, RC 3111, RC 511, RC 611, RC 4211, RC 5111, RC 911, RC 6311, RC 7211, RC 1211, RC 8411, RC 9311, RC 10211 RC 12 Series : RC 212, RC 312, RC 2112, RC 412, RC 3112, RC 512, RC 612, RC 4212, RC 5112, RC 912, RC 6312, RC 7212, RC 1212, RC 8412, RC 9312, RC 10212 RC10Series RC 9 Series  Kirloskar : KC & KC.X Series (Single Stage) : KC-2, 3, 4, 5, 6, 9, 12 KC & KC.X Series (Two Stage) : KC-21, 31, 42, 51, 63, 72, 84, 93, 102 K 110 Series : K20 x 110, K30 x 110, K40 x 110, K60 x 110 PC-2 Series AC 70 Series : AC-470, 570, 670, 770, 870, 1070, 1270, 1470, 1670  Sabroe : Sabroe / Accel : SMC 100 Series : SMC-4-100, 6-100, 8-100, SMC 104 S, 106 S, 112 S, 116 S, SMC 104 L, 106 L, 108 L, 112 L , 116 SMC 65 Series : SMC-2-65, 3-65, 4-65, 6-65, 8-65  Voltas / Carrier : 5H Series : 5H-40, 60, 80, 120, 46, 66, 86, 126 5F Series : 5F-20, 30, 40, 60 06D Series : 06D-48, 68, 75, 018, 024, 037 Frick Series :  4X4, 5X5, 6X6, 7X7, 8X8, 9X9Vilter Series : Type VMC 450 : 2, 4, 6, 8, 12 & 16 CylinderSRA : SRA Series200, 300, 400, 600, 900Super  : 4.1/2X4.1/2, 5.1/2X5.1/2, 6.1/2X6.1/2 7.1/2X7.1/2, 8.1/2X8.1/2Sinco : 4.1/2X4.1/2, 5.1/2X5.1/2, 6.1/2X6.1/2 7.1/2X7.1/2, 8.1/2X8.1/2Mycom Series : Apart from available Compressor Spare Parts range we are in position to manufacturer for any refrigeration compressors parts like Liners, Valves Assembly, Piston Rings, Valve Reeds/Plates, Valve Springs, Gudgeon Pin, Bushes etc.Our expertise team can develop & manufacture of Spare Parts according to the design parameters, drawings & samples. Oversized & undersized Spare Parts Of various types of compressors can be supplied according to the requirement.

compressor connecting rods These connecting rods are manufactured using computer numerically controlled machines. These connecting rods are provided with Small end and Big end bearing bore, which is to impart higher accuracy.

air compressor valves, Carbon Steel Valves, Disc Valves, Industrial Valves

Crown International Offers a full range of application-engineered reciprocating compressor valves that combine the highest possible flow efficiency with maximum service life. The France offers a complete line of premium quality valves to satisfy most application requirements.

We offer high grade Air Compressor Gaskets that are manufactured in sturdy material with ten sets in a packet. The Air Compressor Gaskets are finely finished and offered as per O.E. Also, we are the renowned Manufacturers and Suppliers of Air Compressor Gaskets in the domain.

• Size: 5 Inch
• Thickness: 1.5mm
• Applications: Truck spare parts

• Weight: 50 Gms To 5.5 Kgs
• Power Source: AC/ DC Power
• Compressor Type: Screw Compressor
• Spare Type: Compressor Kit

• Material: Cast Iron
• Brand Name: Cummins
• Material: Cast iron
• Compressor Type: Screw Compressor
• Packaging Type: Box

We are the leading manufacturers, exporters and supplier of this products.

• Material: Brass
• Condition: New
• Configuration: Air Compressor
• Country of Origin: India

1/1" PRICE = 300 INR 3/4 X 1" PRICE = 225 INR

• Application: Refrigeration Parts
• Type: Refrigeration Compressor
• Brand Name: TFI
• Place of Origin: Delhi, India

Proving rings are used for load measurements and are used in outfits of a number of Soil / Cement & Bitumen Testing Equipments like Direct Share Test Apparatus, Triaxil Share Test Apparatus, CBR Test, Unicontained Test, Marshall Test etc. They are made out of special steel carefully forged to give maximum strength and machined to give highest sensitivity combined with stability to ensure long life and accuracy. When Compressive or tensile load is applied within the elastic range, the proving rings get temporarily deformed. This deformation is measured by a sensitive dial gauge fixed co-axially at the center of proving ring. The dial gauge readings thus obtained versus load applied enable the operator to find out unknown load, just by noting the dial gauge reading for unknown load. The proving rings have high elasticity and on removing load they regain their original shape provided they are loaded in their elastic limits.A Dial gauge and plunger anvil are mounted on brackets clamped to the ring body. The dial gauge is held perfectly rigid without the remote chance of shifting due to inadvertent shocks or pressures exerted on it. The dial gauge plunger rests on an adjustable anvil. Proving Rings , from 50 kg to 1,00,000kg capacity provided with 1/2 inch B.S.F female threads. Loading bosses and a loading ball nipple and steel ball are supplied with each rings. Rings of capacity over 25000kg (or 25 Tonnes) are not thus threaded. Each ring is individually calibrated and supplied with works calibration chart and a carrying case.

Refrigeration Compressors Parts, air compressors parts, gas compressors parts

• Material: Cast Iron And Alloy Steel
• Brand Name: Rajnish
• Tensile Strength: High
• Anti Corrosive: Yes
• Surface: Coated
• Usages: Brake Part

We are the leading supplier of this products.

• Material: Forged Steel
• Weight: 15 - 150 Kgs
• Surface Treatment: Galvanized
• Tensile Strength: 500 - 600 Mpa
• Tolerance: 0.02 - 1 mm

Crown International Offers a full range of application-engineered reciprocating compressor valves that combine the highest possible flow efficiency with maximum service life. The France offers a complete line of premium quality valves to satisfy most application requirements.

Proving rings are used for load measurements and are used in outfits of a number of Soil / Cement & Bitumen Testing Equipments like Direct Share Test Apparatus, Triaxil Share Test Apparatus, CBR Test, Unicontained Test, Marshall Test etc. They are made out of special steel carefully forged to give maximum strength and machined to give highest sensitivity combined with stability to ensure long life and accuracy. When Compressive or tensile load is applied within the elastic range, the proving rings get temporarily deformed. This deformation is measured by a sensitive dial gauge fixed co-axially at the center of proving ring. The dial gauge readings thus obtained versus load applied enable the operator to find out unknown load, just by noting the dial gauge reading for unknown load. The proving rings have high elasticity and on removing load they regain their original shape provided they are loaded in their elastic limits.A Dial gauge and plunger anvil are mounted on brackets clamped to the ring body. The dial gauge is held perfectly rigid without the remote chance of shifting due to inadvertent shocks or pressures exerted on it. The dial gauge plunger rests on an adjustable anvil. Proving Rings , from 50 kg to 1,00,000kg capacity provided with 1/2 inch B.S.F female threads. Loading bosses and a loading ball nipple and steel ball are supplied with each rings. Rings of capacity over 25000kg (or 25 Tonnes) are not thus threaded. Each ring is individually calibrated and supplied with works calibration chart and a carrying case.Calibration charts from Standard Laboratories for the Proving Rings ordered are also available at extra cost.All Proving Rings are Integral Type.Integral type Compressive Proving Rings of different capacities from 50kgf to 200000kgf are available.(a) Above cap. 50 to 500kg.(b) Above cap. 500 to 3000kg.(c) Above cap. 3000 to 5000kg.(d) Above cap. 5000 to 10000 kg.(e) Above cap. 10000 to 20000 kg.(f) Above cap. 20000 to 30000kg.(g) Above cap. 30000 to 50000 kg.(h) Above cap. 50000 to 100000 kg.(i) Above cap. 100000 to 200000 kg.(j) Above cap. 200000 to 300000 kg.

Refrigeration Compressor Parts, Ice factory equipment, Ammonia Valves

Refrigeration Compressor Parts, cooling plants