Concrete Permeability Apparatus Dealers in Anand Parbat, Delhi (6 products available)

A concrete structure is considered to be of adequate durability if it performs in accordance with its intended level of functionality and serviceability over an expected or predicted life cycle. Concrete durability depends largely on the ease (or difficulty) with which fluids (water, carbon dioxide, oxygen) in the form of liquid or gas can migrate through the hardened concrete mass. Concrete is a porous material. Therefore, moisture movement can occur by flow, diffusion, or sorption. We are concerned with all three, but generally the overall potential for moisture in concrete by these three modes is referred to as its permeability. The set up consist of permeability cell, water reservoir and pressure lines, with glass bottles. Consists of a metal cylinder with a ledge at the bottom for retaining the specimen, a flange at the top, removable cover plate and a funnel. A rubber gasket is seated in matching grooves, between the cell and the cover plate, to render the joint water tight. Internal working size of the cell will be 100mm dia X 100mm height. Consists of a length of metal pipe, 50 to 100 mm in diameter and about 500 mm long. The reservoir fitted with a graduated side arm gauge-glass for admitting water and compressed air and a cock for drainage, bleeding and connection to the permeability cell. Heavy duty armored rubber hose with end fittings. Complete with glass bottles but without compressor. For specimen size 100 X 100 mm Concrete permeability tester for three specimen of (100mm dia x 100mm height) or (150mm dia x 150mm height) or (150mm cube) is also available. Relevant Standard: IS: 3085

Application : Industrial

Warranty : 1yrs

Ambient : 0-180 Deg C 180-360 Deg C

Material : Mild Steel

Brand Name : Steco

Sample : 150 x 150 mm

The concrete permeability apparatus comprises of a mild steel cell of Square/Round cross-section mounted on a stand and a pressure chamber is connected to the cell through copper tubing and T-connector mounted on the stand with sleeve packed valve and rubber hose pipe with end connections. The cell assembly consists of one base plate and one top plate connected to nozzles. Note: The pressure chamber is fitted with a pressure regulator which helps in regulating the pressure from 0-15kg/cm sq. Gauge is for indicating the pressure in the cell. A foot pump and a pressure tube is supplied to develop pressure in the chamber. The apparatus is supplied with a measuring cylinder 500cc to measure percolated quantity to water.

Power : 90W

Pressure : 40Pa

Material : mid-steel

As a prominent Concrete Permeability Apparatus Manufacturer, Exporter and Supplier, we offer a range of highly efficient Concrete Testing Equipment. One of the indispensable characteristics of Concrete Permeability Apparatus is to determine the permeability of water through specimen. Our Concrete Permeability Apparatus is highly efficient in defining the permeability of cement mortar and concrete specimens of 15cm cubes casted in the laboratory. Specifications The Concrete Permeability Apparatus that we offer comprises of a brass/gunmetal cell of square/round cross-section mounted on a stand. A pressure chamber is attached to the cell through copper tubing and T-connector is mounted on the stand with sleeve packed valve and rubber hose pipe with end connections. The cell assembly consists of a base plate, a metal funnel and a top plate. The pressure chamber is fitted with a pressure regulator, which helps to regulate the pressure from 0-15kg/cm sq. gauge for indicating the pressure in the cell. A foot pump and a pressure tube are supplied to improve the pressure of the chamber. The apparatus is supplied with a measuring cylinder of 500cc to measure percolated quantity to water. We also offer Single Cell Concrete Permeability Apparatus and Three Cell Models Concrete Permeability Apparatus.