Concrete Permeability Apparatus Dealers in Delhi

Same as above but supplied with three individual cells with stand. Three pressure gauges for indicating pressure in each cell are supplied apart from the main pressure gauge which indicates pressure in chamber Salient Features Available for three samples of size 150mm dia X 150mm high. Available for three samples of size 100mm dia X 100mm high. Accessories : Compresssor with pressure gauge 0-20 kg/cm sq. with automatic pressure valve and pressure rubber hose. Suitable for 440 volts A.C. three phase. Specimen casting mould C.I. for 100mm dia X 100 mm high cylinders, Specimen casting mould C.I. for 150mm dia X 10mm high cylinders, Specimen casting mould C.I. for 150mm cubes, Blow stove 1/2 litre capacity, Resin, Bees Wax, Wire brush, Chissel, Spare glass cylinder 500cc capacity

• Material: Metal
• Color: Metallic, Silver
• Application: Industrial
• Surface Finshing: Polished
• Resistivity: Rust Resistant

Single cell Concrete Permeability Test Apparatus can be availed from us as per the requirement. It is used for determining the permeability of cement mortar and concrete specimens.  The Concrete Permeability Test Apparatus comprises of a brass gunmetal cell of squares cross section mounted on a stand. The pressure chamber of the instrument is connected to the cell through copper tubing and t-connector mounted on the stand. We provide our Concrete Permeability Test Apparatus with a measuring cylinder 500cc to measure percolated quantity of water. Pressure can also be applied by a pressure airline or by a compressor.   Details : Available for sample of size 150mm dia x 150mm high Available for sample of size 100mm dia x 100mm high

• Country of Origin: India
• Type: Automatic
• Certification: CE Certified
• Application: Industrial
• Voltage: 220V
• Warranty: 1 Year

100 mm DIA. Three Cell ModelIS : 3085-1965.It consists of three sets 100 mm DIA cell mounted on a single control panel for testing independently three specimens 100 mm DIA x 100 mm high.The equipment comprises the following :Three permeability cells for 100 mm dia specimen. Each cell consists of a metal cylinder with a ledge at the bottom and flanged at the top, one removable cover plate and a funnel.Made of Gunmetal.A control panel with three independent control circuits for three permeability cell. Each control circuit consisting of a water reservoir, graduated gauge, glass tube, air inlet valve, pressure regulator, pressure gauge 0-15 kg/cm an air bleed valve, a drain crook for water reservoir and a shut-off valve for the permeability cell. A common air inlet for the three units is provided for connecting to the air compressor.(150 mm dia. Single Cell Model).IS :3085-1965.The apparatus is CCA-58 but provided with a permeability cell for 150 mm dia x 150 mm high specimen. The equipment comprises the following :-One permeability cell for 150 mm dia specimens consisting of a metal cylinder with a ledge at the bottom and flanged at the top. One removable cover plate and a funnel. An air bleed valve is provided on the cover plate. Made of Gunmetal.-A control panel fitted with a water reservoir, graduated gauge glass tube, air inlet valve, pressure regulator, pressure gauge 0-15 kg/cm, an airbleed valve, a drain cock for water reservoir and a shut off valve for the permeability cell.

• Application: Industrial
• Warranty: 1yrs
• Ambient: 0-180 Deg C 180-360 Deg C
• Material: Mild Steel
• Brand Name: Steco
• Sample: 150 x 150 mm

• Power: 90W
• Pressure: 40Pa
• Material: mid-steel

As a prominent Concrete Permeability Apparatus Manufacturer, Exporter and Supplier, we offer a range of highly efficient Concrete Testing Equipment. One of the indispensable characteristics of Concrete Permeability Apparatus is to determine the permeability of water through specimen. Our Concrete Permeability Apparatus is highly efficient in defining the permeability of cement mortar and concrete specimens of 15cm cubes casted in the laboratory. Specifications The Concrete Permeability Apparatus that we offer comprises of a brass/gunmetal cell of square/round cross-section mounted on a stand. A pressure chamber is attached to the cell through copper tubing and T-connector is mounted on the stand with sleeve packed valve and rubber hose pipe with end connections. The cell assembly consists of a base plate, a metal funnel and a top plate. The pressure chamber is fitted with a pressure regulator, which helps to regulate the pressure from 0-15kg/cm sq. gauge for indicating the pressure in the cell. A foot pump and a pressure tube are supplied to improve the pressure of the chamber. The apparatus is supplied with a measuring cylinder of 500cc to measure percolated quantity to water. We also offer Single Cell Concrete Permeability Apparatus and Three Cell Models Concrete Permeability Apparatus.

A concrete structure is considered to be of adequate durability if it performs in accordance with its intended level of functionality and serviceability over an expected or predicted life cycle. Concrete durability depends largely on the ease (or difficulty) with which fluids (water, carbon dioxide, oxygen) in the form of liquid or gas can migrate through the hardened concrete mass. Concrete is a porous material. Therefore, moisture movement can occur by flow, diffusion, or sorption. We are concerned with all three, but generally the overall potential for moisture in concrete by these three modes is referred to as its permeability. The set up consist of permeability cell, water reservoir and pressure lines, with glass bottles. Consists of a metal cylinder with a ledge at the bottom for retaining the specimen, a flange at the top, removable cover plate and a funnel. A rubber gasket is seated in matching grooves, between the cell and the cover plate, to render the joint water tight. Internal working size of the cell will be 100mm dia X 100mm height. Consists of a length of metal pipe, 50 to 100 mm in diameter and about 500 mm long. The reservoir fitted with a graduated side arm gauge-glass for admitting water and compressed air and a cock for drainage, bleeding and connection to the permeability cell. Heavy duty armored rubber hose with end fittings. Complete with glass bottles but without compressor. For specimen size 100 X 100 mm Concrete permeability tester for three specimen of (100mm dia x 100mm height) or (150mm dia x 150mm height) or (150mm cube) is also available. Relevant Standard: IS: 3085

The company stands tall among the Manufacturers, Exporters and Suppliers of Concrete Permeability Apparatus based in New Delhi. The Concrete Permeability Apparatus, offered by the company, is used for find the durability of concrete with the help of water and air. The Concrete Permeability Apparatus is used on the concrete or cement specimens. The company offers the best Concrete Permeability Apparatus at the market leading prices. Available Models Of Concrete Permeability Apparatus Single cell model Three cell model Six cell model Features Of Concrete Permeability Apparatus Each cell has its own control system, operating pressure gauge and valves Angle frame, on which the cell is made, used to fit concrete the specimens of 15x15cm Top of the cell has one valve to allow the pressure on the specimen which further connects with glass tube with the help of pipe Glass tube mounted on the vertical frame and provided without compressor Permeability also available for cement test

Concrete permeability apparatus, Concrete permeability apparatus, Supplied complete with · No. of cell : 1 no. · Specimen cube cylinder · Size :- 150 mm dia. Iron split length wise for 150 mmdia.x 150 mm specimen . Air Compressor

The concrete permeability apparatus comprises of a mild steel cell of Square/Round cross-section mounted on a stand and a pressure chamber is connected to the cell through copper tubing and T-connector mounted on the stand with sleeve packed valve and rubber hose pipe with end connections. The cell assembly consists of one base plate and one top plate connected to nozzles. Note: The pressure chamber is fitted with a pressure regulator which helps in regulating the pressure from 0-15kg/cm sq. Gauge is for indicating the pressure in the cell. A foot pump and a pressure tube is supplied to develop pressure in the chamber. The apparatus is supplied with a measuring cylinder 500cc to measure percolated quantity to water.

• Type: Automatic
• Application: Laboratory
• Certification: CE Certified
• Voltage: 220V
• Driven Type: Electric
• Temperature Range: 0-5 Deg C
• Warranty: 1 Year

It is used for determining permeability of cement mortar and concrete specimens of 15cm cast in the laboratory. Consist of a M.S cell, water reservoir and pressure lines, with glass bottles.

We are one of the prominent concrete permeability manufacturers, exporters, and suppliers, based in india. The direct shear test is carried out with an apparatus consisting of a square divided into two halves. The specimen, contained in the box, is subjected to a constant normal load while an increasing horizontal force is applied to one of the section of the shear box. This force causes a shear failure along the junction between the box sections. The shear force and the normal load are measured directly. The rate of strain is adjusted by the speed of the horizontal force applied. The loading unit has v-strips on which the shear box housing rests. Our direct shear machine is suitable for specimens of size 60 x 60 x 25mm. ref. Standard is:2720 (part 13), bs 1377, astmd 3080 ordering information concrete permeability apparatus, 3 cell model for 100mm cubeconcrete permeability apparatus, 3cell model for 100mm cylinberconcrete permeability apparatus, 3cell model for 150mm cubeconcrete permeability apparatus, I cell model for 150mm cubeconcrete permeability apparatus, 3cell model for 300mm cylinberconcrete impermeability apparatus, 3cell model for 150mm cube as per dlnstd to enquire about the desired product(s), just check the box and then click �inquiry now� button which is provided below.

• Consistency Plunger: (in Plastic Case)
• Vicat Mould Split: Type, with Clamping Ring

The procedure, as recommended in various standards, is for determining the quantity of water required to produce a cement paste of standard consistency. The standard consistency is attained when the 10 mm plunger of the apparatus penetrates the material to a pre-determined depth under free-fall. A new sample is prepared and tested with initial and final needles in accordance with the procedure described in various specifications. Vicat Apparatus consists of a frame bearing a movable rod with a cap at top and a Vicat mould in the form of the frustum of a cone, (80+5)70 + 5mm dia at the base,(70mm+5mm) 60 mm at the top and 40 mm high, and with a glass base plate of minimum 2.5 mm thickness with various models of Vicat apparatus as per standard specifications. Two models of Vicat Apparatus are offered

We are offering concrete permeability apparatus the design of concrete mix is aimed at maximum durability for the conditions prevailing at the site where it is to be used. Ability to resist the flow of water through, is one of the important durability characteristics. The permeability is determined on cement, mortar and concrete specimens, either cast in the laboratory or obtained by cutting out cores from existing structures.

Concrete Permeability Apparatus, automatic soil compactor

Concrete Permeability Apparatus, Briquette Mould, Core Drilling Machine

Concrete Permeability Test Apparatus, Standard Spatula, Shrinkage Bar Mould