Concrete Testing Equipment Dealers in Karol Bagh, Delhi

Veekay Industries is ranked among the prominent Concrete Test Hammer Manufacturers, Exporters and Suppliers. Our Concrete Test Hammer instrument is easy for quick and estimated measurement, of the resistance to pressure of the produced concrete products. The principle, on which our Concrete Test Hammer works, is based on the rebound impact of a hammer on a piston, which rests beside the surface of the concrete products. The greater the resistance of the concrete, greater will be the rebounded impact. By reading this rebound impact on a scale and relating it to curves on graphs supplied with the Concrete Test Hammer, the resistance to pressure in MPa or PSI can be found, with 20%.

• Minimum strength: 10MPa
• Maximum strength: 60MPa
• Thickness: 0.3 mm

• Material: Steel
• Application: Concrete Testing
• Brand Name: Steco
• Voltage: 220 V
• Frequency: 50/60 Hz
• Grade: Semi-Automatic
• Strength: 100-700 Kg/cm

Our company is premium Manufacturer, Supplier and Exporter of Flexure Testing Machine from Delhi, India. The Flexure Testing Machine offered by us is in compliance with norms set by industrial regulatory bodies. Our machine is tested on stringent quality parameters to ensure that clients receive a defect free product. Customers can acquire small and bulk orders of Flexure Testing Machine from us at highly affordable rates. Features : Light weight, rugged high strength frame Double action hydraulic pump Self-aligning roller assembly Hydraulic jack provided with retraction spring For testing beams of 100x100x500mm and 150x150x700m Conforms to IS:516, BS:1881 AND ASTM C78   Models available : EKE 331 100kN Flexure Testing Machine with double action pumping unit manually operated. EKE 332 100kN Flexure Testing Machine with Electrically operated Pumping Unit, fitted with 1 H.P. motor, suitable for operation on 415 V. 3 phase A.C. Supply

ASTM C 151 also specifies the use of shrinkage bar moulds for the determination of soundness. The change in length of the specimen is determined by Length Comparator listed in the concrete section. Two models are offered. One is provided with stainless steel smooth reference points and the other is provided with knurled and threaded reference points. Both the models are available as single mould and multiple mould compartments. Each mould is supplied complete with base plate and two reference points per compartment of mould. Mould size: 25 x 25 mm section and 250 mm effective length (Distance between two inner-most of the reference points   Details Product Code : EKE 401 Standrad: IS : 10086, IS:4031 Optional Extra EKE 40201 Set of 20, Smooth Reference Points EKE 40501 Set of 20, Knurled and Threaded Reference Points

We have adopted secure payment methods that are approved by authority and featured with options that facilitate quick transfers. Established in Delhi(India), our organization has been effective in taking over the local and domestic marketplaces as distributor of the product. We supply finest quality of Slump Test Apparatus, which has internal dimensions ranging from 20*10*30 cm.

Slump test apparatus, The slump cone is filled with freshly mixed concrete and is tamped with a tamping bar in three or four layers. The top of the concrete is leveled off with the top of the slump cone, the cone is lifted vertically up and the slump of the sample is immediately measured. Base has cleats on its underside to help dig into the ground surface Positive clamping of slump cone to the base while filling and rodding the concrete A combination swivel carrying handle also doubles as the datum making the conventional and somewhat awkward measuring procedure of using a foot rule and a datum bar, a thing of the past Supplied complete with base plate, having cleats and swivel handle and EKE 345 Tamping Rod of 16 mm dia x 60 cm long.

The density of both fresh and hardened concrete is of interest to the engineer for numerous reasons including its effect on durability, Strength and resistance to permeability. Hardened concrete density is determined either by simple dimensional checks, followed by weighing and calculation or by weight in air / water buoyancy methods. Density of Hardened Concrete: The density of hardened concrete specimens such as cubes and cylinders can be quickly and accurately determined using a Buoyancy Balance. Buoyancy Balance: The buoyancy balance system developed by us consists of a rigid support frame. Incorporating a water tank mounted on a platform. A mechanical lifting device is used to raise the water tank through the frame height immersing the specimen suspended below the balance fixed on a cradle. The balance supplied may also be used as a standard weighting device, thus providing a versatile and comprehensive weighing system in the laboratory. The sample is weighed in air and in water to calculate the density of fresh concrete.

kEWIL Concrete Test Hammer Useful for non-destructive estimation of quality of concrete of a finished structure and its relative compressive strength. The instrument consists of a casing in which a hammer mass, special spring, hammer locking and release mechanism are housed. A spherical ended plunger projects at one end which, when pressed against the test surface, actuates the release mechanism of the hammer mass. It gives an impact on the plunger. The hammer mass rebounds after the impact and an indicator registers the amount of rebound on a linear scale. The compressive strength of the material can be computed from the calibration diagram supplied with each hammer. It gives results within +15% of actual compressive compressive strength.

Aggregate is consisted by a majority of materials of construction, and it is common practice to test aggregates for properties. Some properties like particle size, distribution, relative densities, soundness and resistance to attack by chemicals are checked. Sampling of aggregates forms an obligatory fraction of several constructioncivil engineering projects. Getting the sample to gauge the average quality of the entire mass is of prime importance. It is also true that some properties may perhaps be ideal in one situation, but not in another. S.S.International presents a fine array of cutting -edge and sophisticated aggregate testing instruments which are extremely dependable and guarantee complete accuracy of the operations. It is generally employed for sampling and preparation, abrasion value and tile testing. Grid Sieves, Riffle Boxes, Wire Basket, drying shrinkage and Aggregate Crushing Value Apparatus are some of the aggregate testing equipments from our side.

  We are the leading manufacturer & Supplier of superior Quality Digital Concrete Test Hammer. Concrete Test Hammer is designed specifically for the non-destructive testing of concrete structures. This method has considerable advantages over conventional methods of assessing the compressive strength of concrete in that large areas can be tested in a very short time at a very low cost .

• Type: Concrete Testing Equipment
• Weight: 10-50kg, 100-150kg, 150-200kg, 50-10kg
• Color: Brown, Grey, Light White, White
• Voltage: 110V, 220V, 380V, 440V
• Application: Concrete Testing
• Power: 1-3kw, 3-6kw, 6-9kw, 9-12kw
• Driven Type: Electric, Hydraulic, Mechanical, Pneumatic
• Warranty: 1year, 2years
• Automation Grade: Automatic, Fully Automatic, Manual, Semi Automatic

• Material: Cast Iron
• Power Supply: AC Supply
• Weight: 1.4 Kgs.
• Phase: 3 phase
• Product Type: Test Hammer
• Voltage: 440 V

The apparatus is used for determining the workability of fresh concrete, provided the maximum size of the aggregate does not exceed 38mm. The test is particularly useful for concrete mixes of very low workability where true slump values are not reliable. It consists of two rigid conical hoppers and a cylinder mounted on a rigid metal frame. The lower openings of the hoppers are fitted with hinged trap-doors having quick release catches. A circular metal plate is provided to cover the top of the cylinder. Supplied complete with one plaster's trowel and one tamping rod, 16mm dia x 600mm long, one end rounded.

Capacity 200 kg. For cement concrete flooring tiles. The specifications are similar to the above machine, but for the bearing rollers of 25 mm dia and spans of 150, 200 and 250 mm. The load is applied at the rate of 200 kg/min/meter. Without lead shots.

• Application: Concrete test
• Power: Manual
• Standard: BS 1881-103, BS 5075
• Minimum Order Quantity: 1 Piece

The use of chemical additives to increase workability of concrete requires an air content check to be made. Air Entertainment meters are used to determine air entertained in freshly mixed concrete by pressure method.

Ultrasonic Pulse Velocity Tester, Hardness Software, Abrasive Cut Off Wheels

Concrete Testing Equipment, Soil Testing Equipment, Cement Testing Equipment

Standard Spatula, Pycnometer Apparatus, Concrete Permeability Test Apparatus

Test Sieves

concrete permeability test equipment, compressor testing machine