Concrete Testing Equipment Dealers in New Rohtak Road, Delhi

• Material: Steel
• Application: Concrete Testing
• Brand Name: Steco
• Voltage: 220 V
• Frequency: 50/60 Hz
• Grade: Semi-Automatic
• Strength: 100-700 Kg/cm

• Type: Concrete Testing Equipment
• Certification: ISO 9001:2008
• Weight: 10-50kg
• Color: Grey, White
• Voltage: 110V, 220V
• Application: Concrete Testing
• Power: 1-3kw, 3-6kw, 6-9kw
• Driven Type: Electric
• Warranty: 1year
• Automation Grade: Automatic

kEWIL Concrete Test Hammer Useful for non-destructive estimation of quality of concrete of a finished structure and its relative compressive strength. The instrument consists of a casing in which a hammer mass, special spring, hammer locking and release mechanism are housed. A spherical ended plunger projects at one end which, when pressed against the test surface, actuates the release mechanism of the hammer mass. It gives an impact on the plunger. The hammer mass rebounds after the impact and an indicator registers the amount of rebound on a linear scale. The compressive strength of the material can be computed from the calibration diagram supplied with each hammer. It gives results within +15% of actual compressive compressive strength.

The Flexure Strength Testing Machines are designed to provide maximum rigidity throughout their working range. A hand pumping unit, a separate electrically cum hand operated pumping unit housed in a cabinet is supplied. The pressure gauge 0-100 kn x 1 kn, on/off switch and a slow/fast level to control rate of loading are fitted on the front panel of the pumping unit. A facility for hand operation is provided. A micro switch and relay fitted inside the pressure gauge protects the unit from over loading. The load gauge is calibrated against NPL/ NCCBM certified proving ring.

  We are the leading manufacturer & Supplier of superior Quality Digital Concrete Test Hammer. Concrete Test Hammer is designed specifically for the non-destructive testing of concrete structures. This method has considerable advantages over conventional methods of assessing the compressive strength of concrete in that large areas can be tested in a very short time at a very low cost .

• Material: Steel, Granite
• Size: 38 mm
• Resolution: 0.001 mm

Our company is one of the leading Manufacturers, Exporters and Suppliers of the Tile Flexure Testing Machine. The Tile Flexure Testing Machines produced by our company are high-quality with numerous features and types. They are widely in demand due to their excellent performance. Tile Flexure Testing Machine is a double lever loading machine where load is placed by a flow of lead metal that automatically stops as the sample breaks. The sample is mounted between rollers which are 40mm or 12mm in diameter. Bearing rollers can be placed at center distances of 150, 200 or 270mm. The unit comes equipped with a 20 Kg lead metal Types 100 KN Flexure Testing Machine - Motorized Model100 KN Flexure Testing Machine - Hand Operated Model Applications It is used for determining the flexure strength on molded concreteFlexure test specimens of 15 cm x 15 cm x 70 cm or 10 cm x 10 x 50 cm. size can be tested for strength by third point loading method

The apparatus consists one each of Compaction Mould Gun Metal, 100 mm I.D. x 127.3 mm height x 1000 cc. volume, complete with collar and base plate. Rammer 2.6 kg x 310 mm controlled fall.

The use of chemical additives to increase workability of concrete requires an air content check to be made. Air Entertainment meters are used to determine air entertained in freshly mixed concrete by pressure method.

A concrete structure is considered to be of adequate durability if it performs in accordance with its intended level of functionality and serviceability over an expected or predicted life cycle. Concrete durability depends largely on the ease (or difficulty) with which fluids (water, carbon dioxide, oxygen) in the form of liquid or gas can migrate through the hardened concrete mass. Concrete is a porous material. Therefore, moisture movement can occur by flow, diffusion, or sorption. We are concerned with all three, but generally the overall potential for moisture in concrete by these three modes is referred to as its permeability. The set up consist of permeability cell, water reservoir and pressure lines, with glass bottles. Consists of a metal cylinder with a ledge at the bottom for retaining the specimen, a flange at the top, removable cover plate and a funnel. A rubber gasket is seated in matching grooves, between the cell and the cover plate, to render the joint water tight. Internal working size of the cell will be 100mm dia X 100mm height. Consists of a length of metal pipe, 50 to 100 mm in diameter and about 500 mm long. The reservoir fitted with a graduated side arm gauge-glass for admitting water and compressed air and a cock for drainage, bleeding and connection to the permeability cell. Heavy duty armored rubber hose with end fittings. Complete with glass bottles but without compressor. For specimen size 100 X 100 mm Concrete permeability tester for three specimen of (100mm dia x 100mm height) or (150mm dia x 150mm height) or (150mm cube) is also available. Relevant Standard: IS: 3085

• Material: Cast Iron
• Power Supply: AC Supply
• Weight: 1.4 Kgs.
• Phase: 3 phase
• Product Type: Test Hammer
• Voltage: 440 V

Ultrasonic Pulse Velocity Tester, Hardness Software, Abrasive Cut Off Wheels

concrete permeability test equipment, Compression Testing Machines

Concrete Testing Equipment, Soil Testing Equipment, Cement Testing Equipment