Cone Penetrometer Dealers in Inderlok, Delhi (7 products available)

Pavement dynamic cone penetrometer a simple and robust instrument for rapid in-situ measurement of the structural properties of road pavements. provides fast and efficient method of obtaining information. for continuous measurements up to a depth of 800mm and 1,200 mm with the extension rod. portable and can be accommodated in a carrying case. the pavement dynamic cone penetrometer (dcp) is a very robust instument, designed for rapid in-situ evaluation of strength of sub- grade and the bases for roads & runway pavements. Continuous measurements can be made down to a depth of 800 mm, or when an extension is fitted, to a depth of 1200 mm. Where pavement layers have different strength, the boundaries can be identified and the thickness of the layers determined. a typical test takes only a few minutes and the instrument therefore, provides a very efficient method of obtaining information which would normally require test-pits. Correlations have been established between measuremets with dcp and california bearing ratio (cbr) so that the result can be interpreted and compared with cbr specifications for pavement design. Agreement is generally good over most of the range but differences are apparent at low values of cbr, especially for fine grained materials. the design of the pavement dcp is similar to the one descibed by kleyn, maree and savage (1982) in their paper. "the application of the pavement dcp to determine the bearing properties and performance of road pavements" published in proceedings of international symposium on bearing capacity of roads and airfields, vol.1. (the norwegian institute fo technology) and developed by trrl, uk. it incorporates a 8kg weight dropping through a height of 575 mm and a 60o cone having a diameter of 20mm. It is supplied complete with assembly tools and weighs 20kg approx. the dcp needs three operators, one to hold the instrument, other to raise and drop the weight and a technician to record the result. The instument is held vertically and the weight carefully raised to the handle llimit and then allowed to fall onto the anvil.

casing material : Mild-steel

Automation Grade : Manual

Country of Origin : India

Static Cone Penetrometer is used to evaluate soil consistency, compaction level and bearing capacity of fine grained and soft soils at shallow foundations and pavement sub-grades. The Static Cone Penetrometer, we make available, is very reliable and easy to operate. It is accurately designed by skilled professionals. We are one of the most successful Manufacturers, Suppliers and Exporters of Static Cone Penetrometer from Delhi, India.   Supplied Complete Wth : MSI 3087-1 Penetration Cone, steel 600 angle 10cm2 base area with friction jacket- 1 No MSI 3087-2 Mantle Tube, non-uniform , 36mm OD at the two ends and reduced dia in between with sounding rod working length 1m- 15 Nos. MSI 3087-3 Load Measuring Head, with Automatic Cut off valve and Oil Can, without Pressure Gauge – 1 No. MSI- 3087-4 Pressure Gauge 0-60 kg/cm2 – 1 No. MSI 3087-5 Pressure Gauge, 0-160kg/cm2 – 1 No. MSI 3087-6 Screw Anchor , with Bolt- 4 Nos MSI 3087-7 Anchor Driving Handle –1No MSI 3087-8 T-Rod –1No MSI 3087-9 Spanner – 1No MSI 3087-10 Extension Pipe 0.5m long for MSI -4004-7 Anchor Driving Handle- 2 Nos. MSI 3087-11 handles for driving the rack.

Specification: A simple and robust instrument for rapid in-situ measurement of the structural properties of road pavements Provides fast and efficient method of obtaining information For continuous measurements up to a depth of 800 mm and 1,200 mm with the extension rod. Portable and can be accommodated in a carrying case A typical test takes only a few minutes and the instrument therefore, provides a very efficient method of obtaining information which would normally require test-pits. Correlations have been established between measurements with DCP and California Bearing Ration (CBR) so that the results can be interpreted and compared with CBR specifications for pavement design. Agreement is generally good over most of the range but differences are apparent at low values of CBR, especially for fine grained materials. It incorporates a 8 Kg weight dropping through a height of 575 mm and a 60 deg. cone having a diameter of 20 mm. It is supplied complete with assembly tools and weighs 20 Kg approx The DCP needs three operators, one to hold the instrument, other to raise and drop the weight and a technician to record the results. The instrument is held vertically and the weight carefully raised to the handle limit and then allowed to fall onto the anvil. The equipment consist of the following replaceable parts Top and Bottom Rod, Handle, Hammer, 1m Scale, 60 deg. Cone, Anvil

It will consist of metallic cone with half angle of 15' -30 ±15' and 30.50mm coned length. It will be fixed at the end of a metallic rod with a disc at the top of the rod so as to have a total sliding weight of 148± 0.5 gms. The total rod shall pass through two guides. (to ensure vertical movement) fixed to a stand. Suitable provision will be made for clamping the vertical rod at any desired height above the surface of the paste in the trough. A brass trough 50 mm internal diameter and 50 mm depth will be provided as per IS specification resting on M.S.bars. Ground Glass: 10mm thick and about 45 cm square or larger rough glass as per IS 2720 (Part V-1985) for mixing soil and water Spatula: Flexible with blade about 8 cm long and 2 cm wide made from stainless steel material as per IS: 2720 (part V-1985) Evaporating dish: Made from porcelain material having diameter of about 12 to 15 cm with smooth surface as per IS 2720 (part V-1985)

Automation Grade : Manual

Material : Aluminium

Application : Soil Testing

Color : Black

Finishing : Powder Coating

Weight : 1.800kg

Cone Penetrometer is used for finding the limit limit of soil whose plastic index is low. it is as per IS Standard. it is consist of frame with graduated scale at the front, the cone is fitted at the bottom of the rod which pass through the scale., one brass container of 50mm dia the whole unit is packed in cardboard box.

Material : Mild Steel

Weight : 5 Kg

Brand Name : Unique

Country of Origin : Made in India

Usage/Application : Soil Testing

Finishing : Powder Coated

Automation Grade : Manual

  :