Cone Penetrometer Dealers in Delhi

The Universal Cone Penetrometer is used for testing wide variety of materials. In this test a chosen force is applied over a given area for a known period of time and the depth of the penetration or depression made in the sample is measured in tenths of a millimeter which is expressed as a penetration number. We are a name of repute in manufacturing and supplying Universal Cone Penetrometer of superior quality at reasonable rates. Components Consists of an accurately machined aluminum base with in set sprit level.Adjustable feet are provided in the base for leveling.The unit is supplied with built in timer to control the duration of penetration which is preset to 05 seconds.The instrument is provided with lead screw gear arrangement, leveling screws, SPR it level.It is supplied complete with a plunger weighing 470.5gms for testing bitumen products, two brass weights of 50 & 100gms each, aluminum containers, brass penetration cone weighing 102.5 + .05gm, Penetration needle Used to test GreasePetroleumBitumenTarAsphaltSoil

Flexural tests of concrete beam have their own importance in concrete road constructions as well as buildings constructions. Normally concrete beams of sizes 10cm x 10cm x 50cm or 15cm x 15cm x 70cm are tested for flexural strength. Salient Features Specifications : Consists of a movable bearing rod to which a cone 145mm. long and 75mm. dia at a base is fixed. The bearing rod passes freely through a bracket which is provided with release mechanism. A dial graduated in mm with rack and pinion is provided for measuring the penetration. Complete with a conical container 150mm ID X 180mm deep and a platform.

• Material: Stainless Steel
• Automation: Manual
• Usage/Application: Soil Testing
• Brand Name: Steco
• Usage: Dynamic
• Packaging Type: Box

• Brand Name: Rimik,Rimik
• Condition: New
• Application: Industrial, Laboratory
• Type: Penetrometer
• Weight: 0-10 Kg, 10-20 Kg
• Specifications: Weight ( assembled) : 3.9kg Weight ( in case) : 4.4kg Dimensions ( assembled ) : 431 x 1063 x 85 (mm) Case ( optional ) : 448 x 362 x 110 (mm)

At last! A highly accurate, logging Cone Penetrometer that won’t break the budget.The RIMIK Micro CP Cone Penetrometer incorporates many of the features of its big brother, the CP40II Penetrometer, but has a smaller, non-graphical display, smaller memory, and does not have GPS capability. At last! A highly accurate, logging Cone Penetrometer that won’t break the budget.The RIMIK Micro CP Cone Penetrometer incorporates many of the features of its big brother, the CP40II Penetrometer, but has a smaller, non-graphical display, smaller memory, and does not have GPS capability.

• Material: Mild Steel
• Weight: 5 Kg
• Brand Name: Unique
• Country of Origin: Made in India
• Usage/Application: Soil Testing
• Finishing: Powder Coated
• Automation Grade: Manual
•  :  

Available in two options as follows Cone Penetrometer, Automatic The unit is supplied complete with a stainless steel penetration test cone 35 mm long with a smooth polished surface and an angle of 30°. Facility exists for adjusting cone height in relation to the specimen. Cone Penetrometer consists of one each of the following: Automatic Timer Penetration Test Cone Penetration Test Cup, 55 mm dia x 40 mm deep Cone Penetrometer Cone Penetrometer consists of one each of the following: Penetration Test Cone, Penetration Test Cup- 55 mm dia x 40 mm deep

• Weight: Approx 3kg
• Frequency: 50 Hz
• Material: Cast Iron
• Display: Analog
• Angle: 30 Degree
• Supply: Ac Supply

Our company name figures among top-notch Manufacturers, Exporters and Suppliers of Cone Penetrometer in Delhi, India. Our Cone Penetrometer always complies with industry standards and features longevity, high grade and pocket friendly prices. The Vicksberg Penetrometer that we bring forth is a Simple and light instrument used for measuring static penetration resistance. Buyers can acquire it custom-built specifications, from us. More about Cone Penetrometer : The thrust force is provided directly by the operator who, by pushing on the T handle, forces the cone into the soil. The encountered resistance is measured on the fitted load ring. Testing is only possible in soils with good consistency and for short depths.Specifications:- 1 cones with 30o cone angle  2 KN (200 kg f) load ring  Road length 45 cm.

• Brand Name: Static Cone

We are offering static cone penetrometer 3000kg. Capacity. (hand operated):- the driven is by means of rack and pinion and is driven manually through a gearing arrangement. The gearbox rack and pinion are fixed on two upright pillars and the movement of the rack is guided by a bracket and two pillars. The loading is done hydraulcially. Tow pressure gauges 15cm dia. One of low capacity 0-60gk/sq.cm.in 0.5kg/cm.sq. Divisions and other 0-160kg/cm.sq.are provided to indicate the penetration resistance. Isolation valve is provided to automatically isolate the lower range gauge when it reaches the maximum capacity. The valve can be adjusted and locked at desired values between 20 to 60kg/cm.sq. Provisions made to anchor the unit at site and there is provision for lateral shifting so that subsequent test could be performed without having to shift the entire anchorage system. the standard outfit is as under: penetration cone, steel 60 angle 10sq.cm. Base area with friction jacketone mantle tube, nonumiform 36mm od at the two ends and reduced dia in between with souriding rod, working length 1m fifteen. load measuring head with automatic cut-off valve and oil can one set. pressure gauge 0-160kg/cm.sq.one pressure gauge 0-60kg/cm.sq one auger with bolt. flour auger driving handle flour t-rod one spanner one note: uniform diameter mantle tubes can be ordered at extra cost. optional extras: mantle tube 36mm uniform o.d. With sounding rod, working length 1mtr. spares & accessories: steel cone, 60 degree, 10 sq.cm. Base area. mantle tube 36mm uniform o.d. Working length 1 meter with sounding rod. mantle tube 36mm o.d. At the ends and reduced dia in between with sounding rod. working length 1 meter. pressure gauge 6 inch dia 0-10kg/cm.sq. In 0.1 kg/cm.sq. Divisions. sampler to go with the above equipment. friction jacket for friction ratio.

Used for determining the Liquid Limit of soils. ● Specially useful to obtain reliable and accurate results for those soils which have low plasticity index. ● The percentage moisture contents determined when cone with half angle of 15-30 minutes under a total sliding weight of 148 gm penetrates 25 mm gives the Liquid Limit.

IS: 2720 (Part 5) - 1985 The test is based on the relationship between moisture content and the penetration of the cone into the soil sample. The moisture content at a given depth of penetration of the cone is taken as the liquid limit. As an inferential test, empirical correlations have been developed to assess the shear strength of soils at liquid limit. Reduces operator error Applicable to a wide range of soils Gives reproducible test results Provides direct measurement of penetration SS0-1008 Cone Penetrometer, Automatic IS: 2720 (Part 5), IS: 11196 - 1985 Enables the determination of liquid limit simply and quickly. The unit is supplied complete with a stainless steel penetration test cone 35 mm long with a smooth polished surface and an angle of 30°. Facility exists for adjusting cone height in relation to the specimen. Cone Penetrometer consists of one each of the following:Automatic Timer Penetration Test Cone Penetration Test Cup, 55 mm dia x 40 mm deep SSO-1009 Cone Penetrometer, IS: 2720 (Part 5), IS: 11196 - 1985, :Cone Penetrometer consists of one each of the following: Penetration Test Cone Penetration Test Cup, 55 mm dia x 40 mm deep

Our company is a reputed Manufacturer of the Mortar Cone Penetrometer. The Mortar Cone Penetrometers produced by our company are very important Concrete Testing Equipments and they are widely demanded. We produce high-quality Mortar Cone Penetrometer with many attractive features. Regerence Standard - IS 2250-1965 For determining the consistency of masonry mortar Consists of a movable bearing rod to which a cone 145mm. Long and 75mm diameter at a base is fixed. The bearing rod passes freely through a bracket which is provided with release mechanism. A diameter graduated in mm with rack and pinion is provided for measuring the penetration. Complete with a conical container 150mm id x 180mm deep and a platform.

Specification: A simple and robust instrument for rapid in-situ measurement of the structural properties of road pavements Provides fast and efficient method of obtaining information For continuous measurements up to a depth of 800 mm and 1,200 mm with the extension rod. Portable and can be accommodated in a carrying case A typical test takes only a few minutes and the instrument therefore, provides a very efficient method of obtaining information which would normally require test-pits. Correlations have been established between measurements with DCP and California Bearing Ration (CBR) so that the results can be interpreted and compared with CBR specifications for pavement design. Agreement is generally good over most of the range but differences are apparent at low values of CBR, especially for fine grained materials. It incorporates a 8 Kg weight dropping through a height of 575 mm and a 60 deg. cone having a diameter of 20 mm. It is supplied complete with assembly tools and weighs 20 Kg approx The DCP needs three operators, one to hold the instrument, other to raise and drop the weight and a technician to record the results. The instrument is held vertically and the weight carefully raised to the handle limit and then allowed to fall onto the anvil. The equipment consist of the following replaceable parts Top and Bottom Rod, Handle, Hammer, 1m Scale, 60 deg. Cone, Anvil

The dcp is very robust instrument designed for structural properties of existing road pavement. It can measure upto the depth of 800 mm or 1200 mm with extendable rod. It consists of 8 kg weight dropping through a height of 575 mm and a 60o cone having dia of 20 mm.

• Automation Grade: Manual
• Material: Aluminium
• Application: Soil Testing
• Color: Black
• Finishing: Powder Coating
• Weight: 1.800kg

Cone Penetrometer is used for finding the limit limit of soil whose plastic index is low. it is as per IS Standard. it is consist of frame with graduated scale at the front, the cone is fitted at the bottom of the rod which pass through the scale., one brass container of 50mm dia the whole unit is packed in cardboard box.

The Static Cone Penetration Test is also found to be a handy tool for predetermining the length and estimating the load carrying capacities of piles passing through soft compressible strata and resting upon hard clays, sands or gravel. The penetration resistance of the cone has nearly the same value as the load which can be carried by the actual pile per unit area of the pile tip. By using the additional friction jacket with the standard equipment, identification of various soil types is also possible. To use the Static Cone Penetrometer, a truncated steel cone (60° angle, 10 cm2 at base) is forced vertically into the soil by static thrust, required to cause a bearing capacity failure of the soil immediately surrounding the point where measurements are required to be made. Such measurements made at suitably desired intervals, provide a continuous bearing capacity profile and hence a shear strength profile of the soil at the sounding location.

• Type: Cone Penetrometer
• Color: Brownish, Reddish, Silver
• Condition: New, Used
• Frequency: 50Hz, 60Hz
• Phase: Double Phase, Single Phase
• Usage: Soil Load Capacity Test

Product Code: EKE 567   EKE 56701 Top and Bottom RodEKE 56702 HandleEKE 56703 HammerEKE 56704 1 m ScaleEKE 56705 60° ConeEKE 56706 Anvil   A simple and robust instrument for rapid in-situ measurement of the structural properties of road pavements Provides fast and efficient method of obtaining information For continuous measurements to a depth of 800 mm and 1,200 mm with the extension rod Portable, and can be accommodated in a carrying case   The Pavement Dynamic Cone Penetrometer (DCP) is a very robust instrument, designed for rapid in-situ measurement of the structural properties of existing road pavement constructed with unboundmaterials. Continuous measurements can be made down to a depth of 800 mm, or when an extension is fitted, to a depth of 1200 mm. Where pavement layers have different strengths, the boundaries can be identified and the thickness of the layers determined. A typical test takes only a few minutes and the instrument therefore, provides a very efficient method of obtaining information which would normally require test-pits. Correlations have been established between measurements with DCP and California Bearing Ratio (CBR), so that results can be interpreted and compared with CBR specifications for pavement design. Agreement is generally good over most of the range, but differences are apparent at low values of CBR, especially for fine grained materials. The design of the pavement DCP is similar to that described by Kleyn, Maree and Savage (1982) in their paper. The application of the pavement DCP to determine the bearing properties and performance of road pavements published in proceedings of International Symposium on Bearing capacity of roads and airfields, Vol.1, (The Norwegian Institute of Technology) and developed by TRRL, UK. It incorporates a 8 kg weight dropping through a height of 575 mm and a 60º cone having a diameter of 20 mm. It is supplied complete with assembly tools and weighs 20 kg approx.The DCP needs three operators, one to hold the instrument, one to raise and drop the weight and a technician to record the results. The instrument is held vertically and the weight carefully raised to the handle limit and then allowed to fall onto the anvil.

We are offering cone penetrometer for soil testing. It consist of unit with one meter scale fit on it , spare rod, cone & weight about 8kg . The instrument are nicely pack in wooden box. for more detail , please send your valued enquiry.

It will consist of metallic cone with half angle of 15' -30 ±15' and 30.50mm coned length. It will be fixed at the end of a metallic rod with a disc at the top of the rod so as to have a total sliding weight of 148± 0.5 gms. The total rod shall pass through two guides. (to ensure vertical movement) fixed to a stand. Suitable provision will be made for clamping the vertical rod at any desired height above the surface of the paste in the trough. A brass trough 50 mm internal diameter and 50 mm depth will be provided as per IS specification resting on M.S.bars. Ground Glass: 10mm thick and about 45 cm square or larger rough glass as per IS 2720 (Part V-1985) for mixing soil and water Spatula: Flexible with blade about 8 cm long and 2 cm wide made from stainless steel material as per IS: 2720 (part V-1985) Evaporating dish: Made from porcelain material having diameter of about 12 to 15 cm with smooth surface as per IS 2720 (part V-1985)

• Cone angle: half angle of 15-30 minutes
• Item Code: ZI-3004
• Power: Electric
• Total sliding weight: 148 gm

Cone Penetrometer, Direct Shear, Cement, Concrete, Core Cutter

  For determining the Liquid Limit of soils. This is specially useful to obtain reliable and accurate results for those soils which have low plasitcity index. The percentage moisture contents determined when cone with half angle of 15-30 minutes under a total sliding weight of 148 gm penetrates 25 mm gives the Liquid Limit.

Cone Penetrometer, Static and Dynamic Apparatus, Analog Oscilloscope

quality control instruments cone penetrometer, Material Testing Equipments

Cone Penetrometer, Magnetic Stirrer with Hotplate