Control Signals Bawana, Delhi

A range of highly manoeuvrable. lightweight lifts, designed to take the strain out of any lifting job from ground level to over shoulder height, Ideal for use in narrow aisles and confined spaces. Perfect for all applications from pharmaceutical to catering, from packing line to food processing, from warehouse to office, kitchens, laboratories, retail outless, etc. Electric models:Automatic electronic overload protection sytem ensures safety. Maintenance free and sealed batteries,automatic charger.

it is an automatic Wire-Sizing machine to cut sleeving, tubing and wire into lengths from 10mm to 1000mm.(or longer). It is capable of cutting wire, sleeve and ribbon at the rate of (1800m) per hour. The unit is ideal for prepartion of hook-up wire, sleeving, solder, shrink tubing etc. The cut length is controlled and set through a four digit thumb-wheel switch, wire is fed through feed rollers and the machine switched on.

This is a range of centrifugal Wire-stripper cum twister capable of stripping the insulation (PVClTeflonenamel) and twisting the strands (in case of multistrand wire) automatically in a single operation.A centrifugally loaded Tungsten-carbide tool bit can be adjusted for different Insulation diametercore diameter combination, stripped length and amount of twisting desired. All adjustments are simple to make, making change-over from one wire type to the other, fast and simple.As the tool never makes a physical contact with the core, the stripping and twisting is done without nicking the core..

Power : 100 watts , 220 AC

Weight : 35 Kg

is an automatic Wire-Sizing machine to cut sleeving, tubing and wire into lengths from 10mm to 1000mm.(or longer). It is capable of cutting wire, sleeve and ribbon at the rate of (1800m) per hour.The unit is ideal for prepartion of hook-up wire, sleeving, solder, shrink tubing etc. The cut length is controlled and set through a four digit thumb-wheel switch, wire is fed through feed rollers and the machine switched on.The machine de-reels, feeds and cuts material to length automatically; and can process one, two or three wire simultaneously.Depending on material and feed, cutting tolerance of better then ą 2% can be achieved. A wire-spool-holderde-reeler is provided with the machine to ensure a drag-free feed of upto three wires to the machine simultaneously. A panel mounted impulse-counter counts the number of wire-pieces cut by the machine. Model: WS-20 is also available with an IR-optical transducer to size polyester stripsfilmstape with a sizing accuracy of ą 0.5mm.

Features : Drive,AC Induction/synchronous motors,Cut tolerance

Weight : 30 Kg

One electronic board without connectors means reliability for many years in the hardest applications.More reliability for the hardest applications and environments.

All parts are made of stainless including hydraulic pump, fork frame, handle, push rod, bearing , pin and bolt, etc. For use in meat and other food industry, dairy canning and all areas where corrosive acids and saline solutions are used.

State-of-art technology is the feature of these soldering systems. They meet the most exacting requirrnents of aU soldering processes. They are. suitable for soldering single sidedPTHmulti-Iayered PCBs and the most intricate hybrid assemblies.A precision digital temperature controller, a unique counter-balanced top loading frame and robust heaters (sealed cartridge type) form the heart of the machine, which is capable of two shift operation with a production rate of 60 soldering cycles hr. A custom-designed loading frame and its movement during the soldering operation meets the kinematic and dynamic requirements of the process; avoiding the common soldering defect such as icicles, bridging, blowholes, etc.Model: DS-01 : This is a totally automatic system with its motorised drive and a 0-6 seconds timer for the movement of the PCB during the soldering opertion. The entire process is controlled by this motorised drive unit, making it independent of operator training and skills.Model: DS-02 : This is a semi-automatic soldering system with the top -frame suitable for holding PCB directly or mounted on the a separate carrier. The system incorporates a precision height adjustment and Dipping angle adjutment for precise soldering action, avoiding percentage rework and common soldering defects.

SLR Range of reflow soldering systems are the state-of-the-art soldering systems for SMD and hybrid PCB assemblies. SMD Components are soldered on the PCB by the reflow process: a process where desired amount of solder paste is applied to the PCB pads; SMD is gludedplaced on the pads and then this assembly is heated to a temperature slightly higher then the melting point of solder. The solder paste heats, melts and reflows forming a strong metallurgical joint. Heat is transfered to the PCB and SMD by rediation from a heat source that faces the PCB side to be soldered. Heat transfer by radiation is goverend by three parameters; Temperature of heat source, distance between the source (heater) and the sink (PCB) and the duration of expouser (inversely proportional to chain speed) All three parameters are infinitly controlable in this range of machines.The mid-zone then reflows the solder at 200-2400C and the solder bond is established. The PCB assembly now enters the dwell and controlled cooling zone of heater banks where the temperature of the PCB assembly is gradually brought down to 100-120°C, avoding the thermal and mechanical stresses that might develop due to solidification of the solder and cooling of the PCB assembly. The system is suitable for soldering even fine print tracks upto 10 mils, without damage to the components and PCB of even FR-3-FR-4, grade, laminates.

Is a complete rework-station for both leaded and non-leaded SMDs and components. It come equipped with a selective soldering de - soldering work head, a PCB-bottom Infra - red Hot - air Pre-heater, and a Hot-air solderingdesoldering gun with interchangable profiled flow-nozzels. The PCB is held in rails on an X-V table. It is a most efficient BGA (ball-grid-array) rework (solderingdesoldering) system and can be used for all surface - mounted - devices including chip components, J-Lead, SO, VSO, QFP, PLCC packages. The SMDs are soldered using the reflow technique by applying solder-paste on PCB prior to the reflow soldering process. BGA packages have pre-deposited solder balls on them and hence do not require solder-paste. Soldering by the Hot-air reflow process is done at a temperature that is only 20-30°C higher then the melting point of the solder alloy, thereby reducing possibilities of damage to the PCB and the SMD. Hot air at precise tamperture and flow - rate is directed at the solderable points, while the bottom of the PCB has been preheated to avoid any thermal shock or stress to the device or PCB tracks to achieve a zero defect soldering of the SMD Package.

Features : Weight/Dimensions,30kg/600x600x600mm (LxWxH)

Is a versatile Rework, Repair and De-soldering system suitable for all type of populated (single sided, PTH, Multilater & Hybrid) PCB assemblies and components.The system comprises of a Temperature controlled solder work station, with a four-point-rest work platfonn and a set of Dip-pot nozzles to suit different de - soldering needs.A conventional tweezer or a miniature nose-pliar can be used to pull-out the desoldered component once the solder melts and reflows.Separate Dip-pots with suitable nozzles are provided to De-solderRework on 8, 14, 16 20, 28 and 40 pin ICs and IC Bases. Even SOTs and CER-DIP ICs can be De-soldered with suitable selection of De-soldering nozzles.The solder work station can be put to other uses when not being used for de - soldering-some of the applications are: Dip-soldering small PCBs, tinnning component leads and tinning stripped ends of multistrand wires.

Continuous-welded heavy steel frame and forks handle weighty loads with ease.Easy-to-use control lever, plus two parking brakes on steering wheels increase safety.A steering handle on 1000kg models for easier and comfortable turning.

It can process hook-up wires at rate of 1200-1800mhr, with 3-track wire feed and 400-600m of flat-cables and tubing. Typical accuracy of ą o.3% for wires up to 1 mtr and ą 0.1% for wire length sizing between 1-to-5 mtr. automatically lends the machine the" HIGHŹPRECCISION" CLASSIFICATION. No other machine available in the domestic market can match the accuracy and speed. The sizing tolerance is also independent of mains frequency variation and is stable through out the entire spectrum of sizing length and wire types.The length of wire to be processed is directly set on the "Wire-length" scale, which is graduated for actual wire lengths. An impluse counter monitors the number of cut pieces processed by the machine. Specialised "Bucket-de-reelers" or "Rotory pan-cake dereelers" are provided as per wire types and packing styles.

A revolutionary design of mast provides the most stable and compact mast in the industry, Provides access to overhead fixture and stocked shelves much safer than traditional ladders or scaffolding, Suitable for single person to work upraised.

Low effort steering wheel control,steering angle of 90 in each direction. smooth liftlowering operation via fingertip control lever. Heavy duty mast with durable mesh guard for optimum visibility.

Sideway battery exchange to reduce intervals,ensure working efficiency and productivity. Tilter head ergonomically designed for maximum opertor comfortable,and control buttons positioned to allow operation with either hand. limit switch mounted on top of mast to precisely set the max.Lifting height,avoid any risk of lifting motor overload.

MODEL: CA-13 : Is a new generation machine in the series of Automatic Cut, Bend and Kink forming of axial components, This high production machine caters to various form geometries including right angle cut & bend for horizontaly mounted Axial componentsThe processing range of the machine spans from 18 watt to 1 watt Resistors and Diodes, in taped form.,C The Heart of the machine in the unique linear conveyor transporter which trasports the device through the various process stages., The rotary cut and form mode of tool operation ensures stress-free forming, avoiding damage to even the most fragile devices., A wide variety of form geometries can be processed on the machine using ToollDie sets (supplied separtely as tooling options) some of the common forms include-right-angle Cut & Bend, Lock-in-kinking, Snap-in-stand-off forms.

Use high quality assembly from industry's mature suppliers to ensure the funciton of the truck's power system and its stabilty. more efficienct and covenient while lifting, lowering and walking, High quality assembly result in longer truck operation life Solid body frame.

Pressure cookers one of the most essential cooking appliance in every household be it in rural or urban areas. They are specially designed to make the cooking chore easy and less time consuming. It consumes less time to cook food than conventional cooking methods and thus saves energy and time as well. Due to the shorter cooking time, vitamins of foods are preserved relatively well. Here food is cooked at a temperature above the normal boiling point of water, killing the majority of micro-organisms.Some pressure cooker comes with steamer baskets to allow more foods to be cooked together. It can be used as effective sterilizer pots of jam, glass bottles, or water in the campsite.As the cooking requirements of different home are different, we have a whole range of options to suit all types of needs. We are manufacturer of pressure cookers of the finest quality. The materials we use are superior to give a safe and secure experience.

Capacity : 2 Ltr.-6.5 Ltr.

In recent times, no home needs any introduction to non-stick and hard anodised cookware. This name is popular among every housewife. This cookware is made of the finest quality of food grade aluminium ensuring safe cooking and longevity which saves fuel and time, without diminishing the valuable vitamins of the food. All our products are free of harmful chemicals like PFOA and are long-lasting. With non stick dosa tawa, karahi and fry pan you can prepare burnt free bread & roti, thepla or dosa. Enjoy these yummy foods with your loved ones prepared with the help of this cooking magic. The arrival of non-stick and hard anodised cookware, you can cook each dish without burning a single spot. Due to its easy use, housewives find it easy to use and clean. Moreover, it requires much less oil during cooking, and thus, the food cooked here are lower in calories which is very healthy. And healthy food is warmly welcomed by everyone.

One electronic board without connectors means reliability for many years in the hardest applications.Lower power consumptions makes scale more user friendly.New batteries are only needed one time per year when weighting 10 pallets per day.Auto shut off prevents the batteries to be discharged when client forgets to trun the in dicator off.Smaller housing is more robust and withstands impacts and vibration better.

Design like NA series floor scale, but can move with four castors. Four alley tool steel potted load cells. Two slopes are fixed to the platform as standard. Deluxe stainless steel indicator as standard.