Cooling Towers Dealers in Delhi

We manufacture and supply a wide range of Round FRP Cooling Tower. It is made from quality approved raw material using advanced technology. Round FRP Cooling Tower is used in various areas such as chemical plants, power stations, oil refineries and cooling industries. It is available in different capacities ranging from 5 TR to 500 TR. Round FRP Cooling Tower is known for its compact design, light weight, less power consumption, low maintenance and corrosion resistant nature.   Salient Features : Casing : Cooling Tower Casing is made of selected grade materials of tough Fibre Glass Reinforced Polyester & resins, etc. Additional embossing is done for extra strength in case of big cooling towers. Fill : Honeycomb & ring type P.V.C fills are used for extended contact area  having a high heat transfer efficiency. The crossing of air & water streams in close proximity which creates a diffused turbulence conducive to evaporation & efficient heat transfer. Water Basin : It is completely leak proof which avoids spillage & seepage of water. It is of deep sump design to ensure maximum water level at all times & made up of FRP with additional stiffening to take care of extra water weight. However RCC basin is recommended for capacities 300TR and above. Sprinkler : Specially designed rotary sprinkler head is made of aluminium alloy to avoid corrosion, also fitted with sealed ball bearings to take care of thrust & radial loads. S.S. & Brass sprinklers are also provided at an extra cost. Fan : Fan cast aluminium alloy fan is of aero dynamic designed axial flow type to achieve high efficiency. FRP fan set can also be supplied on request at extra cost. Drift Eliminator : To reduce carry out losses through entrainment of moisture drops in the stream by specially designed multiblade rotary drift eliminator made of FRP sheets/aluminium. Additional PVC eliminator is provided in large capacity cooling towers. Motor : Special low RPM totally enclosed motors of Vertical, Flange type with enlarged & threaded shaft and sealed top is supplied with the cooling tower. The motor is also weather proof and in IP-55 construction. Supports & Hardware : All components like tower supports, motor supports, leg supports, etc. are either hot dip galvanised or epoxy coated. Hardware is Galvanised Steel. Stainless Steel or Phosphor Bronze hardwares can be supplied on request at extra cost. Note : Dimensional & other engineering data available with proposal/quotation.

• Color: Grey
• Voltage: 380V
• Driven Type: Electric
• Warranty: 1year
• Tower Material: RCC
• Type: Natural Draft Type
• Capacity (Litre/sec): 500 TR

Price Range : Rs 20000 to 4.5 Lacs/Per Piece

• Material: FRP
• Weight: 100-200kg
• Warranty: 2years
• Shape: Bottle Shaped
• Available Capacity Range: 3TR to 700 TR
• Surface: Polished

FRP Round Type Cooling Tower belongs to the Counter-Flow Bottle Shaped Cooling towers. Our FRP Round Type Cooling Tower has features such as rotating sprinklers to distribute the hot water uniformly, compact design for space saving, etc. Also, FRP Round Type Cooling Tower consumes low-power, makes low-noise and produces low vibration. Also, we make it available at affordable prices.   Highlights Rotating sprinklers to distribute the hot water uniformly, Compact design for space saving, Minimum drift loss because of double provision of drift elimination, Simple design leads to low maintenance.

We are offering wooden cooling tower.

• Country of Origin: India
• Material: Wooden
• Certification: CE Certified, ISO 9001:2008
• Weight: 0-100kg
• Voltage: 220V
• Capacity: 0-500L
• Power: 1-3kw, 3-6kw
• Driven Type: Electric
• Warranty: 1year
• Temperature: 0-50℃
• Brand Name: Active
• Tower Type: Induced Draft

• Condition: New
• Warranty: 1 Year
• Cooling Type: Counter Flow
• Voltage: 380V/50HZ/3PH as usual
• Power(W): 1.1KW
• Use: Industrial

Galaxy Metal has now the privilege of offering the complete range of FRP Induced Draft Counter Flow Cooling Towers for HVAC application and other process industries with unique features. Each Cooling Towers are designed for a particular requirement, facilitating the possible choice for the customer to get the performance with unique operating parameters and site conditions. For customers with special cooling operating requirements, Galaxy Metal can design a range of advance solution with low noise, energy efficient and life cycle cost which ensures high thermal performance complying to the green building initiatives. FRP panels are UV stabilized thereby increasing life of FRP than the normal FRP panels. Fan casing are made of FRP rather than MS which reduces the weight and increases the life span. FRP water basin has 450 mm depth to avoid the air suction in pipe line, a common problem faced by customer. Sufficient lover height to avoid water spillage, even water distribution system and high efficiency uPVC fills are provided for proper heat transfer. Galaxy Metal Cooling Towers are designed for safe, proper and continuous operations and they are easy to operate, maintain, repair and inspect. Cooling Tower structures have adequate strength to withstand wind velocity of 150 km/hr and have earthquake resistant structure.

• Warranty: 1 Year From Date Of Dispatch
• Voltage: 220v-380v as client
• Power(KW): 0.18Kw
• Dimension(L*W*H): 1570*1200*2470mm
• Capacity: 000 Kcal/Hr Per Cell
• Max Temp: : 220°C
• Max Pressure: : 200 Bar
• Height (mm): 2000 mm
• Motor Power: 1 Hp

• Type: Cooling Tower
• Color: Blue
• Condition: New
• Automatic Grade: Automatic
• Driven Type: Electric
• Tower Material: Timber/frp
• Cell Size: Minimum 3657.6 Mm X 3657.6 Mm
• Draught Type: Induced
• Drive Type: Gear
• Water Flow Rate: 400-5400 Cmh/cell
• Flow Rate: 0.5-0.53 L/s

We are offering cooling tower. Cooling tower casing is made of selected grade material of tough fibre glass reinforeced polyester and resins etc. An additional embossing is done for extra strength in case of big cooling towers. Negligible maintenance and efficient working at variable flow are its outstanding features.

• Brand Name: Usha
• Material: Frp, FRP
• Driven Type: Electric
• Color: Blue, Grey
• Condition: New
• Automatic Grade: Automatic, Fully Automatic
• Power: 1-3kw, 3-6kw
• Cooling Type: Water
• Application: Industrial Use
• Certification: CE Certified, ISO 9001:2008
• Voltage: 220V, 440V.580V
• Capacity: 0-500L, 1000-1500L, 500-1000L
• Type: Pultruded Frp Cooling Tower, Cooling Tower
• Weight: 200-300kg, 400-500kg
• Warranty: 1year
• Country of Origin: India
• Temperature: 0-50℃

Serving our clients with quality products, we are engaged in manufacturing and supplying supreme quality range of Cooling Towers. These cooling towers are highly demanded and appreciated by our customers for its outstanding cooling functionality and effectiveness for various applications. Our cooling towers are designed to provide oxidization resistant and high strength functionality which are very cost competent and energy efficient. These towers can be availed from us at competitive range of prices.

• Brand Name: RAXO
• After-Sales Service Provided: Yes

RAXO-2004 (Anti-corrosion cooling tower) is used for stop metal corrosion of cooling tower. With us, one can stay completely assured for safe and dependable payment procedures. Established in Delhi(India), we are well-known name offering comprehensive range of products.

• Country of Origin: India
• Type: Cooling Tower
• Voltage: 220V
• Automatic Grade: Automatic
• Power: 3-6kw
• Driven Type: Electric
• Temperature: 50-100℃
• Brand Name: Xylem Goulds

• Country of Origin: Made in India
• Type of Cooling Tower: Induced Draft Cooling Tower
• Cooling Capacity (Ton of Refrigeration): 51- 100 TR
• Usage/Application: Water Cooling
• Shape: Round, Rectangle
• Tower Material: Fiberglass Reinforced Polyester
• Supply Phase: Three Phase
• Features: Maintenance free, Rust proof, Perfect finish.