Core Drilling Machine Dealers in Anand Parbat, Delhi

The machine is suitable for laboratory use for taking cylindrical cores from rock or concrete block. It is compact with a sturdy base, a pillar support with a rack and pinion arrangement for adjusting the height. A penetration assembly centre weights, and a swivel attachment are also provided.  Suitable grips are supplied for loading the rock or the complete block of about 300 x 300mm. in position for taking out the core of required size.  Supplied with Drill bit of 4" dia. and 12" long barrel with suitable 'A' type adopter. Wired for 440volts, 3 ph, 50Hz.      

Motorized Core Cutting & Drilling Machine is suitable to cut / drill cores of concrete, rocks, stones, tiles or the similar material. The machine is suitable for care samples of size upto 150 mm diameter with the help of thin walled diamond bits which are at extra cost. We manufacture core drilling machine as per design & Drawing of the company.

• Rated Power: 2500 - 4000 Watt
• Automatic Grade: Automatic
• Brand Name: Steco
• Material: Mild Steel
• Capacity: 20 mm To 30 mm
• Fuel Type: Petrol

Product Code: EKE 201Heavy duty, pillar type frame with 2 HP, single phase, AC motor Varying cutting feeds provided with water-fed swivel head which can be connected to suitable water supply. Provision at base for water collection/ drainageCore preparation from regular and irregular samplesDetails Clamping arrangement to hold specimens with regular/irregular shapes to the base of machine Four cutting speeds of 600, 800, 1100 and 1500 rpm Core size: EX to NX EKE 20101 Core Drilling Bit, 21.46 mm dia (EX size) EKE 20102 Core Drilling Bit, 30.10 mm dia (AX size) EKE 20103 Core Drilling Bit, 38 mm dia EKE 20104 Core Drilling Bit, 42.04 mm dia (BX size) EKE 20105 Core Drilling Bit, 54.74 mm dia (NX size)

Product Code: EKE 368 It comprises: Percussion Hand Drill, 700 Watts capacity 1 No.Feed Assembly including screw and shaft 1 No.Anchor Bolts and Clamping Pliers 1 Set Core Case is the first innovation in Concrete core drilling. Connected to the core drill assembly with a flexible rubber coupling, the heavy duty, hand held, rotary drill easily produces cores upto 100 mm in dia without the use of cumbersome frameand feed. The Water Jacket surrounding the core barrel is flanged, enabling it to be clamped to the surface to be drilled. For added support, clamping pliers and anchors are supplied. A rubber O-Ring fitted with the flange seals the water jacket core barrel assembly against concrete surface, enabling the return flushing water containing the cuttings to be hosed away from the drill site. Water is fed into the upper water jacket nipple, from there the water flows, through a manifold, into the drill spindle and continues to the inside of the diamond core bit. A steady feed pressure can be maintained on the drill bit by turning the capstan wheel with one hand, while holding the electric drill steady on the coupling with the other. The drill feed assembly, common to all models, makes the systemadaptable to all core diameters with additional conversion kit. Core Case is a completely portable, self-contained system, easily carried by a person in a standard brief case. EKE 36801 Core Bit and Water Jacket, 25 mm dia x 75 mm long EKE 36802 Core Bit and Water Jacket, 3B mm dia x 100 mm longEKE 36803 Core Bit and Water Jacket, 50 mm dia x 100 mm longEKE 36804 Core Bit and Water Jacket, 75 mm dia x 100 mm longEKE 36805 Core Bit and Water Jacket, 100 mm dia x 100 mm longEKE 36810 Core Bit 50 mm dia x 200 mm longEKE 36811 Core Bit 75 mm dia x 200 mm longEKE 36812 Core Bit 100 mm dia x 200 mm long CAUTION Coring cannot be done if encountered by reinforcement steel, hence to be avoided. 2. Core bits larger than 50mm dia may be avoided if concrete with strength M60 is encountered, as this may overload the motor and damage the bit.  

We are a proud Manufacturer, Trader and Supplier of Pavement Core Drilling Machine. What make our Pavement Core Drilling Machine stand out is its attribute if being a diesel engine that is a tremendously powered road building drill. An exclusive fact of our Pavement Core Drilling Machine is that it has been specifically designed for accomplishing the purpose of drilling test cores from or holes in roads, airport runways, bridges etc. Our Pavement Core Drilling Machine is giving the best results for vertically down coring applications.  Components The Machine comprises of two vertical support columns, which carry the Drill headEngine assembly with the help of screwed spindle. 5 HP diesel engine with pulley mechanism works with minimum vibrations. Double precision bit advanced with screwed spindle, to provide a constant, accurate drill pressure, minimum core chipping & long bit life. The entire assembly is supplied on a rigid metal base with leveling facility. Technical Specifications Bit Diameter : Varying from 25mm to 150mmMaximum depth of core : 700mmDrill speed : 475 & 800 R.P.M.Guide Shafts : 50mm diaScrewed Spindle : 20mm diaWater Tap : 12mmDrill WrenchesWater Tank depending on the requirements

• Height: 1300 mm
• Base: 625 x 900 mm
• Head travel on rack: 500mm
• Drill speeds: 900 R.P.M. for soft samples and 350
• Water swivel: Built in the machines.

Suitable to cut/drill cores of concrete, rocks, stones, tiles or the similar materials. The machine is suitable for core samples of size upto 150 mm diameter with the help of thin walled diamond bits which are at extra cost. The machine has sturdy base with pillar support in which rack and pinion is provided for adjustment in height and penetration assembly. The leveling screws are provided at the base. For gripping the sample in position suitable grips are provided. A suitable petrol engine is fitted in the machine with cooling arrangement with water. The base frame is also fitted with wheels for ease of transportation. 

• Material: Mild Steel
• Brand Name: Steco
• Voltage: 230 V
• Frequency: 50/60 Hz
• Machine Type: Semi-Automatic
• Drill Type: Core Drill
• Max. Drilling Diameter: 305 mm

• Rated Power: 4.8 H.P.
• diameter: 150 mm

Our range of core drilling machines are of light weight, versatile and easy to operate. These are designed with a tubular frame mounted on two pneumatic tyres. In addition to this, we also provide a hook in the front side of the frame to be towed behind a jeep and the tyres have been so placed that the total machine is balanced. Further, the main gear box gives a manual feed of 600 mm can be rotated in any direction that is 0-360o for a convenient angle of drilling. It is powered by 4.8 H.P. diesel engine and suitable for taking cores up to the diameter of 150 mm and depth more than 4-5 meters with help of extension rods and bits.

Core Drilling Machine, Material Testing Machines, Vibrating Table