Cutting Oil Dealers in Bawana, Delhi

• Type: Cutting Oil
• Application: Industrial Lubricant
• Application: Industrial Lubricant, Metalworking, Industrial Lubricant
• Packaging Type: Liter, Plastic Barrel,Can
• Composition: Base Oil
• MOQ: 200L

• Type: Cutting Fluid
• Application: Automotive
• Performance Level: Is 11186-1985(reaffirmed 1990) Specifications
• Packing Size: 210l, 50l, 20l
• Form: Liquid
• Pack Type: Bucket, Drum

PAL SYNCO-100, 200 These are premium quality water-soluble oil free fully synthetic type Coolant, specially developed for use on ferrous metals only. These oils does not undergo bacterial degradation and leave objectionable odour. Further These are non foaming, non toxic, non hazardous, thus ensuring total safety of the workmen. These are operator friendly and economical in use due to high mixing ratio and long service life.   PAL SYNCO - 100 is fortified with rust, corrosion inhibitor, bactericide, fungicide etc. It has several advantages over conventional soluble cutting oil. Recommended for machining and grinding of ferrous metals only   PAL SYNCO – 200 contains EP additive to give high surface finish. Recommended for machining and grinding of iron, steel, non-alloyed steel and nickel-chrome steel.   Not recommended for the machining of non-ferrous metals.   Dilution ratio with water varies between 2%-3% depending upon the operation and product handled.   Concentrated mixture may lead to paint peel off in the machines and some discoluration of the operator’s skin. Coolant should be used only in clean circulating system.

It is soluble type superior grade cutting oil, which form a milky emulsion with water. It is manufactured from specially selected base oil having excellent solubility. The emulsion formed is homogenous and stable.It is fortified with rust inhibitors, which imparts, anti-rust and anti-corrosive properties to the emulsion. Carefully selected biocide is added to prevent bacterial growth in emulsion.   it is recommended for variety of metal working operations on ferrous and non-ferrous metals such as cutting, cold rolling of steel, and hot rolling of aluminium, special rolling of stainless steel etc. The emulsion strength for machining ranges from 5 - 10 % depending on the severity of machining. For stable emulsion, oil should always be added to water and not vice-versa, with continuous stirring.

These cutting oils are more commonly referred to as soluble oils. This however, is a misnomer because they are not really soluble in water but form an emulsion when added to water. These emulsifiable oils are mineral oil based concentrates, which contain emulsifiers that allow them to mix with water and form a milky white emulsion. They also contain additives to improve their lubricating properties, rust and corrosion inhibitors and a biocide to help control foul smell.

Metal Cutting Fluids, Lubricating Oils, hydraulic fluids

Cutting Oil, Industrial Lubricant Oil, White Oils

Cutting Oil, ldo, Lubricating Oil

Cutting Oil, Thrust Bearings, UJ Cross, fan belts, Tq Engine Oil