Delcon Capacitors Pvt. Ltd. Wazirpur, Delhi

Today power is the most essential element in every aspects. There is a huge demand of power every where. But due to some unavoidable reasons many of power is wasted through distribution. It is there for very necessary to feed apparent power supply(KVA) and capacitive load (KVAR) to power loads(KW) to correct the power losses. Hoc_age Power capacitors are manufactured using reinforced heavy edge zn-al mpp film as di-electric in accordance with BIS specification IS:13340 : 1993These capacitors are wound on electronically controlled automatic winding machines in a dust free atmosphere thereby achieving uniform tension and with completely air free adjacent layers of metallised polypropylene   Self healing capacitor are likely to be derated under following conditions : System containing harmonics. Intermittent large fluctuations in load  Where switching operation exceed exceed 1000 times in one year We recommed All PP/Mix- dielectric design for such applications.  

Electric Power Capacitors are devices which can store electric charge. They are used in tuned circuits, timing circuits, filters, amplifier circuits. And are used for power factor correction

A range of Aluminium Electrolytic Motor Start Capacitors, housed in an Aluminium case. These capacitors are suitable for small and medium size electric motors. Electrical connections via single Terminal for single cane and wire for double alluminium cane suitable for soldering or push on receptacles. The duty cycle rating is 1.67 % or 1/60 th full time and corresponds to a maximum duty cycle of 20 starts each of three seconds duration per hour.

Tolerance : + - 5%

Material : Polypropylene / Aluminium

Power factor of fluorescent and discharge lamps are very low due to chokes used as low as 0.3 tot 0.6.Low power factor necessitates higher current requirement for the same amount of power, resulting in lower efficiency and poor voltage regulation. Hence the capacitors are used in fluorescent fitting to improve the power factor.

Voltage Rating :  250 – 440 A.C.

Voltage Rating :  + 10 %

Capacitors for C.V.T. & U.P.S. For use in CVT/ UPS where high harmonic contents occurred on the basic 50 Hz frequency. Manufactuerd with high reliability low loss mettalised polypropylene film. Typical voltage and capacitance range are 400 to 600V and 2 to 60 mfd respectively.