Differential Pressure Gauge Dealers in Delhi

• Low Pressure Differential Gauge: Low Cost Sensocon Differential Pressure Gauge

Low pressure differential gauge low pressure differential gauge for pharma companies. Specifications: accuracy 2% mounts in industry type : arrow indicator die cast aluminum housing standard holes temperature : 20 to 140 f

• Brand Name: DWYER USA
• Size: 0-1000 PAC

  dwyer 2000-1000pa magnehelic differential pressure gauge using dwyer's simple, frictionless magnehelic gage movement, it quickly indicates low air or non-corrosive gas pressures--either positive, negative (vacuum) or differential. The design resists shock, vibration and over-pressures. No manometer fluid to evaporate, freeze or cause toxic or leveling problems. It's inexpensive, too. order #: 2000-1000pa mfg part #: 2000-1000pa  the magnehelic gage is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems and pressures in fluid amplifier or fluidic systems. It also checks gas-air ratio controls and automatic valves, and monitors blood and respiratory pressures in medical care equipment. blowout plug is comprised of a rubber plug on the rear which functions as a relief valve by unseating and venting the gage interior when over pressure reaches approximately 25 psig (1.7 bar). To provide a free path for pressure relief, there are four spacer pads which maintain 0.023" clearance when gage is surface mounted. Do not obstruct the gap created by these pads. The blowout plug is not used on models above 180" of water pressure, medium or high pressure models, or on gages which require an elastomer other than silicone for the diaphragm. The blowout plug should not be used as a system overpressure control. High supply pressures may still cause the gage to fail due to over pressurization, resulting in property damage or serious injury. Good engineering practices should be utilized to prevent your system from exceeding the ratings or any component. O-ring seal for cover assures pressure integrity of case. Samarium cobalt magnet mounted at one end of range spring rotates helix without mechanical linkages.  

Low Cost Sensocon Differential Pressure Gauge We are one step ahead of our competitors in supplying a wide range of Low Cost Sensocon Differential Pressure Gauge. These premium quality products are manufactured using high-grade raw material, which is obtained from the most authentic and leading vendor in the market. Skilled professionals are hired to provide proper guidelines to our staff to manufacture high quality range of these products. The product is used for various purposes in different industries like filter Status, Duct Static, Pressure Clean Room Pressure, Building Pressure,Fan and Blower Pressure. Specifications: Accuracy 2% Mounts in Industry Type : Arrow indicator Die Cast Aluminum Housing Standard Holes Temperature : 20 to 140 F

• Material: Steel
• Connection: Bottom Connection
• Brand Name: Omicron

• Brand Name: D.P.ENGINEERS
• Material: SS 304
• Connection: New
• Type: Differential Pressure Gauge
• Country of Origin: Made in India
• Color: Silver
• Grade: SS 304
• Model Name/Number: D.P.ENGINEERS
• Usage/Application: Differential Pressure Gauge Nozzle

differential pressure gauge nozzle as a patron centric organization,we provide clients with the premium quality of differential pressure gauge nozzle.used for monitoring the air velocity of different industrial applications,the dp gauge nozzle are manufactured by using latest technology.compact design,sturdy construction and high functionality,make thedp dp gauge nozzle highly demanded. features: ideal for air velocity monitoring applications compact design easy operations and calibrations

• Brand Name: Sensocon USA
• Measuring Range(mm): Sz 5000
• Model No.: Sz 5000
• Minimum Order Quantity: 1 Number

• Dial Size: 100 mm/150 mm
• Accutacy: ± 2.5% of F.S.D. ± 2% of F.S.D & ± 1.5% of F.S.D
• Window: Perspex
• Sensing Element: Diaphragm
• Diaphragm Material: AISI 316 SS
• Movement Material: AISI 304 SS
• Max. Static Pressure: 60 kg/cm/100kg/cm(Optional)

These gauges are intended for measuring the pressure differential existing across two media or two parts of a system. The pressure element separates the two pressurized media, and deflects proportional to the difference in pressures between the media, irrespective of the absolute pressures applied. This deflection is converted into the rotation of a concentric pointer on a dial, similar to regular pressure gauges. The absolute value of either of the pressures is not usually indicated

• Scale Dial :: 100mm, 150mm
• Scale Range :: 0… all measuring units to scale pressure, vacuum
• Accuracy :: ±1.6% of FSD
• Case & Ring :: AISI 304 SS, Drawn steel black
• Bourdon & Socket :: AISI 316 SS
• Dial :: Aluminium, black graduation on white background
• Pointer :: Aluminium, black coloured, Zero adjustable
• Movement :: AISI 304 SS
• Elements :: 2 Bourdon tubes / Diaphragm SS 316 / Piston - Magnet
• Thread Connection :: 1/8", 1/4", 3/8", 1/2" BSP & NPT
• Window :: Plain Glass
• Mounting :: Bottom, Surface
• Optional :: Liquid filling, Electric contact, Standard Flange as per BS.ASA & Din

Generally Pressure Gauges and Differential Pressure Gauges are provided with Micrometer type Pointer, by which zero can be adjusted after opening the bezel & glass. However for gauges with Liquid filled Case, this arrangement is practically not suitable, since the filling liquid has to be drained before opening the bezel & glass. After doing the zero adjustment, the Bezel & Glass has to be re-assembled and again the case has to be filled with Liquid. In order to overcome this difficulty, general instruments Consortium has developed a unqiue design if external zero adjustment. By this arrangement, zero can be adjusted without draining the Glycerine, without opening the Bezel, without removing the glass & without touching the pointer, just by rotating a knob provided outside the gauge. Features:  Bellow Type Diaphram Type Capsule Type Magnehelic Type Indicating Differential Pressure Switch

• Differential Pressure Gauge: Pressure Gauge
• Magnehelic Gauge: Dwyer Make Magnehelic Gauge

Differential Pressure Gauge Our specialization lies in offering a commendable range of Dwyer Make Magnehelic Gauge Series 2000. Manufactured with utmost care and precision at our vendors' end using superb quality components, our offered product is highly acclaimed in the market. After being manufactured, the offered product is properly tested on defined parameters. Clients can avail the entire range from us in various Technical Specifications at industry leading prices. Features: Compact size Accuracy Easy installation

Sensocon Differential Pressure Gauge We are one step ahead of our competitors supplying a wide range of Low Cost Sensocon Differential Pressure Gauge. These premium quality products are using high-grade raw material, which is obtained from the most authentic and leading vendor in the market. Skilled professionals are hired to provide proper guidelines to our staff to manufacture high quality range of these products. The product is used for various purposes in different industries like filter Status, Duct Static, Pressure Clean Room Pressure, Building Pressure,Fan and Blower Pressure. Specifications: Accuracy 2% Mounts in Industry Type : Arrow indicator Die Cast Aluminum Housing Standard Holes Temperature : 20 to 140 F

• Dial Size: 150mm
• Connection: 1/4"NPT ( Female ) Standard, other connection are available with adapter
• Accuracy: _+1.5 % of range span
• Standard Ranges: 0-400, 600, 1000, 1600, 2500, 4000 and 6000 MMWC. 0-0.6, 1, 1.6, 2, 2.5,4, 6, 10, 16 and 25 bar/kg/cm2
• Max Static Pressure Process: 100 bar/ kg/cm2

Aerosense Series ASG Differential Pressure Gage Series ASG Differential Pressure Gage with adjustable bookmarks. Indicates Positive, Negative or Differential Pressure. Series ASG Differential Pressure Gage with additional bookmark feature and a wide choice of ranges and models. It quickly indicates Air & non-combustible and compatible gases pressure - either positive, negative or differential. Product Applications: Filter monitoring Blower Vacuum Monitoring Fan Pressure Indication Duct, Room or Building Pressures Clean Room Positive Pressure Indication

We are one step ahead of our competitors in manufacturing and supplying a wide range of Low Cost Sensocon Differential Pressure Gauge. These premium quality products are manufactured using high-grade raw material, which is obtained from the most authentic and leading vendor in the market. Skilled professionals are hired to provide proper guidelines to our staff to manufacture high quality range of these products. The product is used for various purposes in different industries like filter Status, Duct Static, Pressure Clean Room Pressure, Building Pressure, Fan and Blower Pressure.    Specifications:  Accuracy 2% Mounts in Industry Type : Arrow indicator Die Cast Aluminum Housing Standard Holes Temperature : 20 to 140 F   Other Information  Pay Mode Terms: T/T (Bank Transfer)

• Brand Name: Maa
• Measuring Range: mmwc and Pascal
• Material: Aluminium
• Connection: Dual back
• Display Type: Analogue
• Model Name/Number: D21
• Minimum Order Quantity: 1 Piece

• Accuracy: +,- 2%
• Measuring Range(mm): Inches of water, MM of water, CM of water, Pascal.
• Brand: SENSOCON
• Model No.: S2000
• Case & Bezel: Die cast aluminum case and bezel.
• Size: 4 Inch.
• Pressure Limit: -20''Hg to 15 PSI
• Pressure Limits: -0.677 bar to 1.034 bar
• Compensated Temperature Range: 20 Degree to 140 Degree F.

• Brand Name: S R Metal
• Pressure Range: -0.1
• Display: Pointer
• Temperature Range: -20-70 Deg C
• Case Material: Stainless Steel

• Feature: Simple and compact design.,Cost effective and reliable,Simple and compact design.

Differential Pressure Gauges, Pressure Gauges, Pressure Switches

Magnehelic Differential Pressure Gauge, air conditioner accessories

Magnehelic Differential Pressure Gauge, Linear Bar Grilles