Digital Compression Testing Machine Dealers in Delhi

We are a well-known premium Manufacturer, Exporter & Supplier of Digital Compression Testing Machine based in Delhi, India. We are backed by a deft team of professionals who fabricate the Compression Testing Machine in accordance as per IS: 14858 2000 standard. Our Digital Compression Testing Machine is compact and reliable for testing concrete, cubes, etc., making it useful for site and laboratory applications.   Constructions : High stability Two / Four pillar load frame. Each frame tested for stability and alignment to avoid tension failure during a test and to ensure centre loading. A precise large diameter spherical upper platen for optimum results. Motorized hydraulic power pack or pumping unit with rapid approach and automatic over load protection. Comes standard with safety Guards on all four sides The Complete unit comprises a Loading Unit which is of Two / Four pillar model construction having a cross-head with a spherical seated platen. The lower platen is attached to the top of the piston. Pumping Unit attached to the loading unit by high pressure hydraulic flexible hose pipe. The pump facilitates rapid approach of the platens for daylight closure and also provides comprehensive control over the application of load. A control valve provides fine control over the loading rate for accurate pacing. Maximum load is held and retained for approx. 15 min, unless cancelled, using the panel mounted reset switch. Pace rate set for running the test can be maintained manually. Features : Separate displays for load indication and maximum range. Range for load indication corresponding to 4 – 20mA input digitally settable from front panel. Peak / Normal mode selectable. Up to 9 peaks can be recorded and recalled. Buzzer annunciation at Peak. Relay output for load limit detection with limit digitally settable. Digital tare provided to remove initial error. Non-volatile memory for saving configuration. Configuration lock at real to prevent tampering with Range. Aesthetically designed front panel with membrane switches.

We store the entire range of products in our capacious warehouse and we follow the automated warehousing system for the safe assembling as well as storage of the products. By using quality packing material, we make sure that the products are properly packed and there will be zero damage during transit. Moreover, our packaging experts stringently check the entire lot before making the final dispatch.

Interested buyers can place orders with us, timely delivery of the same are our foremost concern. Only quality packaging material has been used for the packing of the products that we offer. Moreover, the entire packaging procedure is conducted under the supervision of the experts.

Product Code: EKE 305H-EKThe Digital Compression Testing Machine has been designed to meet the need for a simple, economic and reliable means to test concrete for its compressive strength. The design emphasizes simplicity, both of construction and operation, and makes the machine easy to use and maintain. The unit is compact, making it useful for site applications. The digital machines are provided with a pace rate indicator to indicate pace rate on a Bar Graph. With a little experience, the pace rate can be controlled manually while the test is in progress.The Complete unit comprises of Loading Unit :The loading unit is of fully welded construction having a cross head, base and solid side plates. The hydraulic jack is fixed to the base. The platens of the machine are hardened, ground and polished. The upper platen is provided with self-aligning action to facilitate testing of various size specimens, suitable size spacers are provided.Pumping Unit:The two speed pump facilitates rapid approach of the platens for daylight closure and also provides comprehensive control over the application of load. A control valve provides fine control over the loading rate for accuracy of pacing. The digital read-out unit, incorporates a 4-digit display, calibrated in kN and features integral load pacing in kN/Sec. Maximum load is held and retained for approx 15 min, unless cancelled, using the panel mounted reset switch. Pace rate set for running the test can be maintained manually with the help of a bar graph indicator. Logged data printing facility through a parallel port interface is provided in the machine. Readings upto 1000 complete runs/tests can be stored in the memory.

• Material: Mild Steel
• Automatic Grade: Semi Automatic, Fully Automatic
• Driven Type: Hydraulic, Electric
• Voltage: 440V, 220V
• Warrenty: 1year

Available from 100 to 2000 Kn Capacity Load Frame Plate type heavy duty frame Pumping unit : powr pack (compact) with release & fine controlling of pressure. Load indicator with 0.1 kn least count available in 220/440 V

The Digital Compression Testing Machine has been designed to meet the need for a simple, economic and reliable means to test concrete for its compressive strength. The design emphasizes simplicity, both of construction and operation, and makes the machine easy to use and maintain. The unit is compact, making it useful for site applications. We bring for the clients Digital Compression Testing Machine of superior quality at affordable rates. Components LOADING UNIT : The loading unit is of fully welded construction having a cross head, base and solid plates/Two pillars for four pillars nut or welded type having a cross head, base model. PUMPING UNIT : The two speed pump facilitates rapid approach of the platens for daylight closure and also provides comprehensive control over the application of load. A control valve provides fine control over the loading rate for accuracy of pacing. The digital read-out unit, incorporates a 4-digit display, calibrated in KN and features integral load pacing in kN/sec. Maximum load is held and retained for approx 15 min, unless cancelled, using the panel mounted reset switch. Pace rate set for running the test can be maintained manually with the help of a bar graph indicator. Logged data printing facility through a parallel port interface is provided in the machine. Readings of runs/tests can be stored in the memory. Hydraulic jack is fixed to the base. The platens of the machine are hardened, ground and polished. The upper platen is provided with self-aligning action. To facilitate testing of various size specimens, suitable size spacers are provided complete with ball seating arrangement. Features Easy to controlCost-effectiveDurableResistance to rustSafeLow maintenance

• Capacity: 2000 KN
• Brand Name: Steco
• Material: Mild Steel
• Application: Compression Testing
• Display Type: Digital
• Frequency: 50/60 Hz
• Power: 2 To 5 Kw

KEWIL Compressive Strength Tester KEWIL COMTEST Series Compression Testing Machines are the finest of their types available. Their rugged construction and extreme simplicity makes it possible to operaate them with ease and complete dependability. KEWIL COMTEST Compression Testing Machines conform to ISS: 148858 (2000) and calibrated with an accuracy of ± 1% as per the requirement of 18 28(Grade A) These machines are available in 50kkN, 100kN, 5000kN, 1000kN,, 2000kN, 30000kN & 5000kNN Capacities.

• Capacity (in KN): 1000KN, 1500KN, 2000 KN, 3000KN
• Pressure Gauge Diameter (mm): 200

Compression Testing Equipment Electrically cum Manually (Hand) Operated. The loads are measured on Bourdon tube type load gauges which are calibrated against certified proving rings. The load gauges are fitted with a maximum load pointer. In the Electrically Operated Pumping Units, load gauges are fitted with micro switches to switch-off the motor when the load approaches the maximum capacity of the gauge, avoiding any over loading. Relays are incorporated so that the motor does not restart on its own after a power breakdown. The electrically operated pumping units are provided with a control knob to adjust the pace rate which can be effectively controlled by an experienced operator during the course of testing, by observing the progress of the load gauge reading. The electrically operated pumping units are also fitted with hand operated pump.

The unit is compact, making its useful for site applications. The digital machines are provided with a pace rate indicator to indicate pace rate on a Bar Graph. With a little experience, the pace rate can be manually while the test is in progress. The loading unit is of fully welded construction having a cross head, base and solid plates. The hydraulic jack is fixed to the base. The platens of the machine are hardened, ground and polished. The upper platen is provided with self-aligning action. To facilitate testing of various size specimens, suitable size spacers are provided.

• Capacity: 2000 KN
• Weight: 630 Kg
• Material: Mild Steel
• Phase: Three Phase
• Voltage: 220-240 V
• Country of Origin: Made in India
• Usage/Application: Concrete Cube Test
• Display Type: Digital
• Gauge: Digital
• Brand: Shivam Industries
• Motor Speed: 1440 RPM
• Frequency: 50-60 Hz
• Power Supply: 220v/415v
• Control Mode: Automatic
• Force: 2000 KN

• Application: Compression testing
• Automation Grade: Automatic
• Brand Name: Vertex
• Display Type: Digital
• Material: Stainless Steel,Metal
• Piston Stroke: 215.00 mm
• Standard: IS 14858(2000)
• Display: Digital
• Platen Size: 220 mm sq.
• Minimum Order Quantity: 1 Set

• Capacity: 100 Ton
• Material: Mild Steel
• Phase: Single Phase
• Voltage: 220 V
• Usage/Application: Concrete Testing
• Display Type: Digital
• Frequency: 50 Hz
• Rust Proof: Yes

The Digital Compression Testing Machine has been designed to meet the need for a simple, economic and reliable means to test concrete for its compressive strength. The Digital Indicator incorporates a 4-Digits display calibrated in Kilo Newton (KN) and preset to maximum load capacity fitted with micro switches to switch-off the motor when the load approaches the maximum capacity of the gauge, avoiding any over loading. Relays are incorporated so that the motor does not restart on its own after a power breakdown. The electrically operated pumping units are provided with a control knob to adjust the pace rate which can be effectively controlled by an experienced operator during the course of testing, by observing the progress of the Digital Indicator readings. Optional: 1. Ranges: 50 kN to 3000 kN 2. Channel and Pillar Type Both Are Available. 3. Extra gauges can be attached to the machine (max. 1 nos. ) 3. Electrical connection can either be Single Phase on 220 V A.C., or 3 Phase 440 V A.C.

We are reckoned as the prime digital compression testing machine manufacturer, exporter and supplier in india. Our digital compression testing machine is provided with a pace rate indicator, which indicates pace rate on a bar graph. The pace rate can also be manually adjusted while the test is going on. comprises of loading unit : the loading unit is of fully welded construction having a cross head, base and solid plates. The hydraulic jack is fixed to the base. The platens of the machine are hardened, ground and polished. The upper platen is provided with self-aligning action. To facilitate testing of various size specimens, suitable size spacers are provided complete with ball seating arrangement.pumping unit : the two speed pump facilitates rapid approach of the platens for daylight closure and also provides comprehensive control over the application of load. A control valve provides fine control over the loading rate for accuracy of pacing. the digital read-out unit, incorporates a 4-digit display, calibrated in kn and features integral load pacing in kn/sec. Maximum load is held and retained for approx 15 min, unless cancelled, using the panel mounted reset switch. Pace rate set for running the test can be maintained manually with the help of a bar graph indicator. Logged data printing facility through a parallel port interface is provided in the machine. Readings upto 100 complete runs/tests can be stored in the memory.

Our digital compressor testing (CTM) machines the finest machines of their type. Their rugged construction and extreme simplicity make it possible to even non-technical personnel to easily operate them and without dependability. We manufacture these CTMs in compliance to varied international standards like BS, ASTM, and Indian Standard IS:516  

• Capacity: 200 KN
• Brand Name: IEDPL
• Material: MS
• Phase: Single and Three Phase
• Usage: Laboratory
• Display Type: Digital

Digital Compression Testing Machine, Compression Testing Machine

Digital Compression Testing Machine, cable installation products