Digital Pressure Gauge Dealers in Okhla, Delhi

• Size: 135x70x24 Mm 
• Display: LCD Display
• Measuring Range: 0-1500,2000,3000,6000,12000 Microns
• Brand Name: Stanlay
• Application: Paint and Powder Coatings,Coating Inspectors,Electroplating Plants,Painting Contractors
• Resolution: 0.1 less than 20 microns,1 greater than 20 microns
• Power Supply: 9 V
• Thickness Range: 0.3 mm 
• Min. Measuring Area: 6 mm
• Standard Probe Size: 18x14 mm (For up to 6000 microm),40x25 mm (For 12000 microns) (D x L)

• Temperature: Storage -40 to +70 Degree Celsius,

Display :8X2 Dot Matrix Display showing various pressure units, MinMax Capture, On OFF. Case :Aluminum Anodize 90mm, MS Powder Coated.

• Warranty: 1 year

The Bushranger® Digital Tyre Gauge for control and accuracy for all inflation and deflation. Large backlit LCD display unit with pocket clip and rubber seal. Accurate to 0.5 psi, reads psi, bar, kPa. Removable Batteries for easy replacement, and auto switch off.

DIGITAL TEST GAUGE YG 309 Technical Specification -STANDARD VERSION: 100mm High resolution Imported Sensor gauge Media: Air/ Gas / Liquid – With any media that will not adversely affect SS 316 Measuring Units: Selection of 8 types Engineering Units (Kg/Cm2, Bar, PSI, KPA, MMWC, MM Hg, IN WC, IN HG) Display: 5 Digit LED Display 15mm Min/Max Capture, On / OFF, Zero adjustment Accuracy ±0.1% of FSD Case Aluminum Anodize 100mm, Internal Working Complete SS Internal Parts Thread Connection 1/4" BSP Mounting Bottom Power Supply 7.5 VDC (1.5V X 5No Alkaline) Duracell type MN 1500 Battery Life 1000 Hours Temperature Storage -10 to +50 Degree Celsius, Alongwith Calibration Certificate For YG 309 Model For Range: (-) 1 to 700 bar

We are offering digital portable carpet pile thickness gauge carpet pile thickness gauge to measure thickness in the laboratory or on site.

• Material: Steel
• Type: Digital
• Measuring Range: 0-12"/ 0-300mm
• Brand: Mitutoyo
• Usage/Application: Height Measurements

SAI Offers Compact Solid State Electronics Digital Penning Guage with Penning Sensors to read Vacuum from 10-2 mbar to 10-6 mbar range. This is cold cathode ionization guage consisting of two electrodes cathode and anode. Penning Guage works on the principle of cold cathode Ionization. The gauge is stabilized to high voltage DC power supply of about 2 KV. The ionization current in terms of vacuum can be noted from the front panel micro-ammeter. It is Factory Calibrated for reliable and repeatable reading, Pressure indications, Excellent Zero Stability. Penning Guage can be used in high vacuum systems, coating units, sputtering units, vacuum furnaces and many other applications where high vacuum to be measured in the range of 10-2 to 10-6 m.bar.

Digital Height Gauge, GC9790II Gas Chromatograph, Karl Fischer Titrator

Digital Tire Pressure Gauge, 24 Oz. Tire Sealant, Slime 16 Oz Tire Sealant