Dispersion Kneader Dealers in Delhi

• Size: 55 litres
• Brand Name: XTREME MACHINES
• Material: ALLOY STEEL
• Application: Rubber Compounding
• Weight: 7 TON
• Color: SIEMEN GREY
• Feature: HYDRAULIC

Our Hydraulic Kneader is specially designed for Rubber Industry. As Rubber compounding requires extra amount of pressure for better dispersion in less time, hydraulic pressure provides with it. Main Features:- - Hydraulic Pressure - Hard Chrome Chamber - EN-24 material rotors - Hydraulic Tilting - No Air compressor required

• Condition: Used
• Country of Origin: Made in India
• Applications: Rubberized Rolls ,Conveyor Belts & Power transmission belts,Rubber for Electric wires
• Mixing Capacity: 55 Litres
• Chamber Volume: 125 Litres
• Main Motor: 55 kW
• Tilting Method: Hydraulic
• Rotor Speed (Front / Rear): 30/25 RPM
• Tilting Angle: 130 Degree
• Tilting Motor: 3 HP
• Air Compressor: 5 HP

We are earnestly engaged in offering Dispersion Kneader to the clients. We are based in Delhi, India. It is broadly used for mixing the compounds and takes less than 20 minutes to complete the process, depending upon the gravity of the compound. It is highly demanded by the rubber and plastic industry. Owing to its optimum functionality, great performance, and long working life, it is highly demanded by our patrons. We offer this product at a cost-effective rate.   Details :  Dispersion Kneader-Used in Rubber/Plastic Industry. It does the mixing of compound, it mixes within 20 minutes depends upon the specific gravity of compound.  Mixing Chamber : Chamber is made of Alloy Steel, we fabricate the same in three parts (Middle Part of Chamber),2 Nos of Sides. We have the provision of cooling arrangement water jacket. Both the Sides of Chamber are also has the provision of cooling. Rotors : Made of Alloy steel fabricated, Water cooling system below the tips of steel casted blades. Blades are welded on rotors axle; it also has water cooling system through holes on shaft to maintain excellent cooling. Gear Box : Indigenous Gear Box with forged steel gears hardened and grounded, stand make bearings. The body of gear box is fabricated, bored and phased. Connecting Gear Box : Two Nos of rotor gears along with coupling are fitted inside the box and the same is being attached with the main shaft of main gear box. Tilting System : Screw type tilting mechanism along with motor and motors break are fitted with the chamber of kneader. Pneumatic Air Cylinder is provided to compress the material during the process of compounding. Pusher (Elephant Leg) is fitted on air piston/cylinder. Motors : All the motors are of standard make like. ABB, SEW, Crompton etc. Applications Rubber Industry Plastic Industry

Ashirwad engineering offers dispersion kneaders, which are acknowledged for their effective functioning in various industrial applications. Our dispersion kneaders are precisely designed to give excellent performance at affordable price. Made from mild steel stainless steel alloy steel used for mixing processes ranging from low viscosity adhesives to high viscosity rubber excellent dispersion & cooling effect: maximum dispersion is facilitated by double bladed rotors, adequate clearance, unique jacketing and rotor construction easy cleaning & sampling: tilting of mixing chamber helps in complete inspection and easy cleaning dust collection: the specially designed dust collector collects spurt powder which saves raw material and checks pollution improved wear resistance: wear resistance is enhanced by rotors made of quality alloy steel, with their edges stilted and helical gears made of alloy steel forging attributes unique jacket construction promotes cooling and low temperature mixing improve the dispersion and prevention of scorching applications plastic industries rubber industries chemical industries applications: rubber industries plastic industries rubber sole, heal & pad for shoes e.v.a. P.v.c t.p.r. Foam & sandal rubber sponge & rubber sandle p.v.c. Artificial leather tyre & tube for bicycle, motorcycle & automobile p.v.c. Floor tile rain boat, rain coat & rubber boat p.v.c. Sheet automobile rubber accessories automobile p.v.c. Accessories marine fenders p.e. For cable industries v-belt & conveyor belt hips abs sport ball & balloons compounding & masterbatches printing roller & rice roller p.v.c. e.v.a. Toy o. Ring & oil seal l.d.p.e. l.l.d.p.e. h.d.p.e. Milk nipple & rubber toy battery & plastic blends reclaim rubber, etc. reclaim plastic pencil industry

• Driven Type: Electric
• Condition: New
• Country of Origin: Made In India
• Mixing Capacity: 25 Litres
• Chamber Volume: 45 Litres
• Main Motor: 40 HP
• Tilting Method: Hydraulic
• Rotor Speed (Front / Rear): 30/24 RPM
• Tilting Angle: 130 Degree
• Tilting Motor: 3 HP

We have carved a niche in the market as the premium Manufacturer, Exporter and Supplier of Dispersion Kneader Machine based in Delhi, India. Fabricated from high grade machinery and the latest technology, the offered Kneader Machine is quick and highly efficient. We are proficient in delivering small or bulk orders of Dispersion Kneader Machine within the postulated time. More about Dispersion Kneader Machine : Dispersion Kneaders offered by us are specially designed so as to meet requirements of Rubber, Plastic and Chemical industries. Ever since the introduction, Dispersion Kneaders have enjoyed reputable performance edge over conventional mixers that has been made possible due to its excellent dispersion capability, distinctive tilting mechanism as well as compact common bed construction. This is also entirely attributed to peculiar jacket construction that develops remarkable cooling effect & low temperature mixing, which is a very important feature for rubber compounds. PPlast Dispersion Kneader is specially designed to meet the requirements of Rubber, Plastic and Chemical industries. Ever since its introduction, the kneader has enjoyed a reputable performance edge over conventional mixers Due to its excellent dispersion Capability, distinctive tilting mechanism and compact common bed construction. PPlast Dispersion Kneader can be employed in a wide of material mixing, ranging from low viscosity adhesives to high viscosity rubber. This is entirely attributed to peculiar jacket construction which develops remarkable cooling effect and low temperature mixing, a very important feature for rubber compounds. Un-matched Features : Excellent Dispersion & Cooling Effect: Maximum dispersion is obtained by double bladed rotors. We also make Triple and Four Blade rotors. Easy Cleaning & Sampling Tilting of mixing chamber enables complete inspection and easy cleaning. Dust Collector The specially designed dust collects spurt powder - thus saving raw material, keeping factory environment clean and pollution free. Improved Wear Resistance Rotors manufactured of high grade alloy steel.

• Automatic Grade: Automatic
• Warranty: 1 Year
• Body Material: Iron
• Power(W): 110kW

We are the leading exporter and supplier of this products.

• Country of Origin: India
• Certification: ISO 9001:2008 Certified
• Voltage: 440 V
• Condition: Used
• Power: Electric
• Product: Buy | Sell Used Second Hand Rubber Dispersion Kneader 25 Ltr

Buy | Sell Used Second Hand Rubber Dispersion Kneader 25 Ltr Make:- Ravi Machines Delhi Motor :- 40 hp Tilting:- Skrew Tilting Available in the best Running Condition  

We are the most promising name, involved in supplying Dispersion Kneader. Hailing from Delhi(India), we are catering to the nationwide requirement with our superior products.

• Weight: 20 Tons
• Condition: New
• Country of Origin: Made in India
• Mixing Capacity: 200 Litres
• Main Motor: 210 HP
• Tilting Method: Screw
• Rotor Speed (Front / Rear): 32/24 RPM
• Tilting Angle: 140 Degree
• Tilting Motor: 10 HP
• Air Compressor: 15 HP

• Condition: New
• Country of Origin: Made in India
• Mixing Capacity: 125 Litres
• Chamber Volume: 265 Litres
• Main Motor: 150 HP
• Tilting Method: Hydraulic
• Tilting Motor: 7.5 HP
• Air Compressor: 10 HP

• Type: Rubber Mixer

We are a leading manufacturer of kneaders. The kneaders are now available with advanced features & technology. We provide these at best quality and best market price.

Understanding the needs of Plastics & Rubber processing industry and developing fully indigenous solution to cater to these needs has always been the prime target.When the need was felt for a mixer capable of hard mixing from process compounding view point, Zenith developed Dispersion Mixer. It can be employed in a wide range of material mixing, ranging from low viscosity adhesives to high viscosity rubber.

SLACH HYDRATECS Hitech rigid and robust tilt discharge dispersion kneaderintensive mixer designed and developed for high quality and optimum mixing performance of rubber, plastic and other polymers with different ingredients with minimum power consumption. Engineered for easy maintenance featuring self contained and floor mounted needs no foundation or grounting. The mixing chamber tilts at 140 degree angle for fast and easy discharge and loading of compound and easy cleaning for batch to batch consistency.

Dispersion Kneaders are specially designed for mixing variety of materials ranging from low viscosity adhesive to high viscosity polymers.

• Voltage: 40
• Power: 200
• Automation Grade: Automatic
• Material: ms
• Capacity: 25ltr upto 200ltr
• Brand Name: MANJEET ENGINEERS
• Model Number/Name: 25-250
• Usage/Application: Rubber & plastic
• I Deal In: New Only
• Minimum Order Quantity: 1 Set

Incorporated in the year 2009, we are considered as one of the reckoned & notable manufacturers and exporters of Dispersion Kneader Machine. Our expert procuring agents procure tested quality metals from certified vendor of the market for manufacturing these kneader machines in accordance with industrial standards. Ideal for uniform mixing applications, these machines are broadly used in rubber, plastic and chemical industries. We duly check Dispersion Kneader Machine on diverse quality norms before supplying to clients.