Distribution Box Dealers in Udyog Nagar, Delhi

Distribution of power in Residential & Commercial Buildings, Independent Villas, Hotels , Hospitals and of course Industries is ensured through composite system known as Distribution Boards. Distribution Boards are made up of metallic or engineering plastic single door or double door enclosures complete with DIN-Rail, Copper/Aluminum Bus Bars, Neutral Link and Earth Link. The enclosure known as Distribution Board is used for installing Isolators,RCCBs,MCBs etc. to make composite Power Distribution System complete with all these protective devices. For safety of installations and human beings it is imperative to properly select Distribution Boards. Shield has introduced a very exhaustive range of high quality Distribution Boards. Shield high quality Distribution Boards are manufactured using CRCA sheet steel Powder Coated with state-of-the-art powder coating technology making it highly corrosion resistant over a long period of time. Shield Distribution Boards blend very well with MCBs, RCCBs & Isolators to provide a very reliable and comprehensive protection system for power distribution. DB Range     Lawson offers complete range of Distribution Boards suitable for various applications as under • SPN Distribution Boards- Single & Double Door. • TPN Distribution Boards Horizontal- Single & Double Door. • Vertical TPN Distribution Boards with MCB as incomer. • Vertical TPN Distribution Boards with MCCB as incomer. • PPI Distribution Boards. • TPN Phase Selector Distribution Boards. • Seven Segment Distribution Boards. Single Pole Neutral Distribution Board Single Door

Wide range of Sturdy, Spacious, Aesthetically designed Newtech Distribution Systems are suitable for all type of MCB's. The units are fabricated from the best quality CRCA Steel Sheets for good strength and finish. The distribution Boards are supplied duly fitted with Busbar, Din-Channel and Neutral link. Distribution Boards are painted with latest powder coating technology. This ensures superior quality finish and also provide protection against corrosive atmosphere.

We are offering main distribution panel (lt panel) 200kva dimensions : 2200mm (width) x 2175mm (height) x 600mm (depth) all-in-one integrated panel with : main incoming two generators incoming changeover system power-factor controller system- 175 kvar mdi (peak load monitor & controller) system with buzzer under voltage over voltage protection reverse phase preventor single phase preventor.

• Box / Top Cover: Opaque/Transparent
• Surge Protection: AC SPD Type 2
• Inputs/Outputs: Single Phase ACDB
• Dimension: Customized
• Power: 12500KVA

Our range of Distribution Panels are basically used for the transfer of current from one point to the other and is designed to meet the requirements of the clients. Top notch quality raw materials are used that are procured from the trusted vendors so as to manufacture upgrade quality products that are durable, requires minimum maintenance, perform extremely well and are corrosion resistant.

• Application: Industrial Use
• Feature: Easy To Install, Electrical Porcelain, Four Times Stronger, Proper Working
• Frequency: 50hz, 60hz
• Tensile Strength: 100-125Mpa, 125-150Mpa
• Phase: AC Single Phase, AC Three Phase
• Temperature: High Temperature, Low Temperature, Medium Temperature
• Automation Grade: Automatic

• Brand Name: Arrostarswitches

We are considered among the renowned Manufacturers and Suppliers of GI Electrical Boxes in Delhi. Our GI Electrical Boxes are noted for their sturdiness, light weight, cost efficiency and tough construction. Only high quality components are used for the construction of GI Electrical Boxes. Other qualities of our GI Electrical Boxes are that they are corrosion resistant and highly durable. Their strength is simply unbeatable.

• Material: Aluminium
• Shape: Rectangular
• Application: Packing Food
• Color: Red
• Feature: Good Quality, Highly Durable, Perfect Shape
• Pattern: Printed
• Finishing: Polished
• Storage Capacity: 20kg, 5kg

Quality being the prime concern of the company; it keeps a strict check on the production, packaging and delivery processes. We are supported by hi-tech machines and expert personnel that enable us in meeting the bulk packaging of the products. Moreover, we check the entire lot before making the final dispatch.

• Phase: Three Phase
• IP Rating: IP40
• Warranty: 1 Year
• Voltage: 220-440V
• Power: 380 V
• Cable entry: Top
• Neutral Bar: 25 sq mm
• Earth Bar: 25 sq mm

• Material: Plastic
• Color: White
• Connection: 4 Way
• Size: 10-12 inch
• Weight: 400-500 g

• Brand Name: S&G
• Material: GI Sheet
• Mounting Type: Wall Mounted
• Shape: Rectangular/Square
• Feature: Flameproof,Rustproof
• Color: All
• Usage/Application: Ceiling Fixtures
• Design: Rectangular/Square
• Box Type: Modular Switch Box
• Material/Body: Metal
• Features: Flameproof,Rustproof
• I Deal In: New Only

We bring forth excellent quality ACB Panel. Fabricated using strong metal material and other high grade components, the ACB Panel is designed in numerous specifications to meet all the requirements of our valuable customers. Our experts strictly adhere to stringent quality checks on ACB Panel required by various industries like telecom, electrical and electronics industries. We make available ACB Panel at affordable prices.

• Features: Shock proof , Industry approved design , Reliable

• Phase: 3 Phase
• Voltage: 200-440 V AC
• Material: MS
• IP Rating: IP40
• Frequency: 50 Hz
• Brand: CII
• Usage/Application: Phase Sequence Correction Equipment Protection
• Features: Corrects the RYB Phase Sequence, whenever the sequence is changed or reversed, For Three Phase UPS, during sequence changed or reversed, UPS will start use the battery power & Battery may become empty within half or one hour. So the entire operations and

Distribution Boxes are beautifully styled, safe and convenient for the end users. These are manufacture with finest of sheet steel which gives long life to the enclosure. The enclosure are treated to seven tank phosphating process prior to powder coating which ensures the best quality of coating of point and longer life.distribution boxes are fully equipped with Bus Bar, Neutral Bar & Earth Bar. The bus bar are made out of ETP grade 99.9 % copper of heavy S.W.G Terminals and wiring space are generous in the boxes. The distribution boxes are provided with full section 35mm mounting rail for fixing all FLORA MCB’s and any standard 35 mm rail mounting accessory.

We are offering power panel. A power supply is a device that supplies electric power to an electrical load. The term is most commonly applied to electric power converters that convert one form of electrical energy to another, though it may also refer to devices that convert another form of energy (mechanical, chemical, solar) to electrical energy. A regulated power supply is one that controls the output voltage or current to a specific value; the controlled value is held nearly constant despite variations in either load current or the voltage supplied by the power supply's energy source. Every power supply must obtain the energy it supplies to its load, as well as any energy it consumes while performing that task, from an energy source. Depending on its design, a power supply may obtain energy from: electrical energy transmission systems. Common examples of this include power supplies that convert ac line voltage to dc voltage. Energy devices such as batteries and fuel cells. Electromechanical systems such as generators and alternators.

AES POWER PANEL A power supply is a device that supplies electric power to an electrical load. The term is most commonly applied to electric power converters that convert one form of electrical energy to another‚ though it may also refer to devices that convert another form of energy (mechanical, chemical, solar) to electrical energy. A regulated power supply is one that controls the output voltage or current to a specific value; the controlled value is held nearly constant despite variations in either load current or the voltage supplied by the power supply’s energy source. Every power supply must obtain the energy it supplies to its load‚ as well as any energy it consumes while performing that task, from an energy source. Depending on its design, a power supply may obtain energy from: Electrical energy transmission systems. Common examples of this include power supplies that convert AC line voltage to DC voltage. Energy devices such as batteries and fuel cells. Electromechanical systems such as generators and alternators.

Suitable for Automatic Door Lift. Door safety sensor interface. Speed Up to 1.5 m/s for open-loop, 2.2m/s close loop. Two tier spped control logic to avoid over travelling due to failure of floor position sensor. Auto Shut Down case of failure of door acknowledge I/P's. Door Control O/P's multi Speed with door status acknowledge I/P's. Single Speed Manual Door Controller Supports upto 16 landing with DOL Wye/Wye-Delta starar for single speed lift. Supports simple gate lock contract & pre gate look configuration. Electronic single phasing/reverse preventer. Speed upto 0.7 m/s for open-loop. Multi Beam Door Sensor The installer must align the RX and TX sensor units correctly for smooth and reliable operation. How to mount and align the units correctly for center openings doors? Check and adujst alignment of car doors. Car doors must be vertically plumb and in line with earch other. Follow the lift manufacturer's guidelines if you need to adjust them. Mark positioning of D200 sensor units on car doors. Units must be in horizontal and vertical alignment (if necessary, use packing to align the units). Leave a gap of 1/4" between bottom units and car sill. Leave a minimum gap 1/4" between units when the doors are fully closed. After installing the sensor units check alignment and adjust with packing if necessary.

Our company is engaged as a Manufacturer and Supplier of MCB Distribution Board. The range of MCB Distribution Board made available by us is designed to be durable and efficient. We offer MCB Distribution Board at the best prices in the market, along with proper quality assurance. We offer MCB Distribution Board that is instilled with qualities of resistance to damage and wear & tear. MCB Distribution Board is used to protect any electrical circuit from getting damaged because of overload or short circuit. MCB Distribution Board are extremely easy to install and useful in various industries. Highlights Well-designed Durable Competitive prices Low on maintenance

We are one of the leading manufacturers and suppliers of Power Distribution Panels and Boards. The offered panel board is very commonly used for the public electric distribution systems. Our supplied power distribution panel board is very efficient in accommodating multiple electric circuits and electrical accessories. Our quality centric approaches help us to provide best range of Power Distribution Panels and Boards. With the use of best electrical switchgears, we design highly advanced and superlative products for several applications. We test them on several parameters and safely supply these products to various commercial clients. Our products are highly reliable and are available at economical price range. Types Of Distribution Panels : Motor Control Center Panel, Power Control Center Panel,Power Motor Control Center Panel and Lighting Distribution Panel.   FEATURES :- Segregated framework and modular design- Optimal spacing & High durability- Proper selection of Bus bar & wires- Available with Single / Double door design- Connection details fixing at panel- Cable entry up/down as per requirement- Made from 14 / 16 gauge MS sheet- MS Sheet with PU Paint / Powder coating- Easy to Cable laying & Termination design- Bus bar selection is depend on current- Copper Bus bar / alluminum Bus bar with P.V.C shrinkage sleeve- Available protection IP54, IP55 / IP64, IP65