Dust Chamber Dealers in Delhi

Sand and Dust Ingress Testing Machine Is designed according to GB4706, GB2423, GB7000.1, IEC 60529,ect standards and meet the IPX5 and IPX6 dust test requirements.

For immaculate and easy to use Dust Test Chamber, you can completely rely on us. We are reputed Manufacturer, Supplier and Exporter of Dust Test Chamber from New Delhi, India. The construction of the Dust Test Chamber is designed to avoid direct radiation of heat on the test specimen. The floor of the Dust Test Chamber ensures that the dust falls in to the hopper for recirculation. Customers can avail the Chamber at competitive rates.   ConstructionThe construction of the Chamber will be such to avoid direct radiation of heat on the test specimen. The floor of the chamber will be so designed as to permit the dust fall in to the hopper for recirculation of supporting specified load of the floor area.Exterior Chamber : Will be made of 18 swg CRC M. S. Sheet with 3 coats of paint or 18 swg Stainless Steel   Interior Chamber : Made of 18 swg Stainless Steel Heating SystemFor temperature uniformity in the chamber, low surface loading sealed tubular heaters will be provided as per IS 4159. The heaters will be fixed in conditioning space in the chamber duly baffled to avoid direct radiation.Heat Input Controlling : Through Solid State Relay proportional control for heating.Dust Agitating Mechanism Dust Agitating Mechanism will be provided with Fan with Motor of sufficient capacity without allowing to heat up unduly during constant operation of 200 hours. Pressure Vacuum will be provided in the Dust Spray Chamber. Provision of using, either fan or vacuum or both can be used at a time, will be provided. Average dust sprayed will be 25 gms ±5 gms in 5 minutes. InstrumentationSolid State Digital Temperature Controller-cum-Indicator will be provided with PT-100 Temperature Thermocouple.Control PanelSeparate Control Panel on top of the Chamber will be provided with Contactors, On/Off Switches, Fuses, and Indicating Lamps.WiringThe wiring, will be channel type with suitable current rated copper wire as per, IS Code.Safety Protection Overload Protector for motor. MCB for heaters. Safety cut off thermostat with audiovisual alarm for over shooting temperature. Back up Fuse protection for mains and individual circuit.

• Usage: Industrial
• Material: Metal
• Weight: 185kg
• Capacity (L): 750 to 3000
• Accuracy: +/-0.5 degree C
• Temperature Range: +20 to +80 degree C

We offer a high grade Dust Chamber to customers in India and overseas. The construction of the Chamber will be such to avoid direct radiation of heat on the test specimen. The floor of the chamber will be so designed as to permit the dust fall in to the hopper for recirculation of supporting specified load of the floor area.   Construction  Exterior Chamber :   Will be made of Heavy Duty Mild / Stainless Steel Interior Chamber : Made of Heavy Duty Stainless Steel Door : Double walled full front opening door, insulated with interior stainless  steel lining. Gasket : To avoid leak proofing, the chamber will be provided with gaskets for the Chamber and for the Door. Mounting Trolley : Mounting type trolley with casters for portability will be provided. Hinges & Latches : Heavy duty Hinges with toggle type locking arrangement Heating System  For temperature uniformity in the chamber, low surface loading sealed tubular heaters will be provided as per IS 4159. The heaters will be fixed in conditioning space in the chamber duly baffled to avoid direct radiation. Heat input Controlling  : Through Solid State Triac Firing Energy Regulator will control with 0 to 100 % proportional control for heating.Port Holes  Port Holes with suitable Rubber Plugs will be provided to access for Internal Chamber Volume and for connecting wires/pneumatic pipes etc.Dust Agitating Mechanism Dust Agitating Mechanism will be provided with fan with motor of sufficient capacity without allowing heating up unduly during constant operation of 200 hours. Pressure Vacuum will be provided in the dust spray chamber. Provision of using, either fan or vacuum or both can be used at a time, will be provided. Average dust sprayed will be 25 gms ±5 gms in 5 minutes. Timer  Programmable Weekly Timer will be provided in the Chamber for Auto Switch Off of the complete chamber after completion of the selectable test time period.Dust Collector  : Hopper shaped bottom will be provided to collect agitating dust (approx 3 to 5 kg).Dust Measuring Device  : Dust measuring device will also be provided.Viewing Window  : A viewing window of 30 x 30 cms will be provided on Front Door.Control Panel  Separate Control Panel on top of the Chamber will be provided with Contactors, On/Off Switches, Fuses, Indicating lamps. The wiring, will be channel type with suitable current rated copper wire as per,  IS Code. Other specifications   Temp. Range :   Ambient +5oC to 80oC Gradient in Space :   1.5 oC Insulation : 75 mm Thick Glass Wool Insulation Power Supply : 220 / 415 V, Single / Three phase Size : As per Customer’s requirement Wiring  : The wiring will be channel type with suitable current rated copper wire as per IS code. Provision of using, either fan or vacuum or both can be used at a time, will be provided.Safety Protection  Overload Protector for motor. MCB for heaters. Back up Fuse. Protection for Mains and Individual Circuit. StandardsThe Equipment will meet requirement : IS : 12063 – 1987 IS : 13947 (Part – I) – 1993 IEC : 60529 Instrumentation   Solid State Digital Temperature Controller-cum-Indicator will be provided with PT-100 Temperature Thermocouple.

• Capacity: 125 Liters
• Temperature: Ambient to 80°C
• Temperature Accuracy: +/- 0.5°C

Our Dust Chambers are specially designed for reproducing a dust filled environment in a limited workspace following Indian and International testing standards especially for research and development works related to automotive and electronic components testing of their resistance to dust atmosphere. In a controlled atmosphere, these sand and dust chamber machines create simulation of dust in accordance to following standards:

• Test temperature: 25
• Test Humidity: 45
• RH Internal volume: 500L/1000L
• Dust concentration: 100
• Spray dust cycle: 1sec
• Material: 304 stainless steel

• Work Space: As per requirement.
• Temperature Range: Ambient +5°C to 50°C
• Gradient in Space: ±1°C
• Construction: Mild Steel
• External: Mild Steel
• Door: Glass / Acrylic – Front opening
• Hinges and Latches: Custom Design
• Gasket: Poly Urethane / Silicon
• Mounting: As required
• Heating System: Air Heater
• Dust Agitation Mechanism: Compressed Air / Mechanical actuator
• Instrumentation: PLC and PID
• Ingress Prevention Test: IP: 56

dust test chambers, benchtop chambers, thermal shock test chambers