Dust Samplers Dealers in Delhi

• Features: Lockable top cover and gaseous attachment., Electromagnetic Interference (EMI) to TVs totally eliminated

The APM 460 NL uses an IMPORTED brushless, continuous rated induction motor driven blower to significantly reduce equipment downtime, maintenance efforts and inconvenience to community. This new improved PM 10 sampler avoids problems arising due to frequent brush wear and limited armature life of blowers used in earlier models.

• Type: Respirable Dust Sampler, Air Samplers
• Weight: 10-20kg
• Voltage: 220V
• Condition: New
• Power Source: Electricity, Electric
• Feature: Durable, Eco Friwndly, Fine Finished, Precise Design
• Warranty: 1yrs, 1yr
• Display: Digital
• Automation Grade: Fully Automatic, Semi Automatic, Automatic
• Brand Name: Technogroovy
• Power: 220V Ac
• Color: Gray

• Type: Respirable Dust Sampler

technical specifications:- flow rate :- 0.9 – 1.4 m3 /min free flow particle size :- particles of 10 microns & below collected on filter paper holder. Spm bigger than 10 microns collected in a separate sampling bottle under the cyclone. sampling time :- 28 hours (maximum) sampling time record:- 0 to 9999.99 hrs. Recorded on a time totalizer. automatic sampling: - 24 hrs programmable timer to automatically shut off the system after pre set time interval. power requirement: - nominal 220 v, single phase, 50hz ac mains supply. size & weight :- 430 x 320 x 840mm.30kg

• Display: Range 600 to 800 mm Hg
• Power Source: Electronic
• Weight: Approx 25 Kg
• Filter Media: 47 mm Filter in a Filter Cassette housed in Filter Holder assembly.
• Clock and Timer System: Accuracy plusm minus 2 min / month.
• Temperature Sensors: - 5 degree C to 50 degree C with a Resolution of 0.10C.
• Resolution: 1 mm Hg
• Display Size: 20 x 4 Inches
• Brand: Instrumex
• Separator Size: PM 2.5
• Output Terminal: RS-232C for connection to PC and USB Flash Drive (Optional)
• Dimension: 17 x 13 x 19 inches
• WINS Impactor: EPA PM 2.5

We are offering respirable dust sampler. sle-rds103 suspended particles matter( spm) which is defined as particles less that 100 microns & respirable suspended particle less than 10 microns have emerged as the most critical among all the criteria air pollutants & is caused by number of sources like large, medium & small-scale industries, road dust construction activities, house hold fuel cooking, waste burning, vehicular emissions etc. in order to control the pollution, it is necessary to periodically monitor the air to determine the extent of pollution and to identify the source of emission sle-rds103 is designed to meet these needs. This model confirms to guidelines of central pollution control board. special features 1 low noise operations 2 brushless blower 3 portable for easy transportation 4 controlled flow 5 spm of particle size less than 100 microns 6 rspm of particle size less than 10 microns principles suspended particles in the air are sampled at constant rate of 0.9 to 1.3 m3 /min through the inlet of cyclone. By virtue of their momentum, particles greater than 10 microns are carried vertically upwards by the air flow and collected on a filter paper of 8 x 10 inch. technilcal specification flow rate 0.8 to 1.5 m3/min particle size up to 10 micron collected on filter and spm bigger than 10 micron collected in a separate collector cup blower continuous duty blower with brushless blower recommended filter gf/a(8” x 10”) for common use, epm 2000 for special research or equivalent time record 0 to 9999.99 hrs. Time totalizer records the running time in hours timer 24 hr programmable timer power requirement 220 volts, single phase ac sle-rds104 (nl) sharper cut off d50 system at 10 microns to separate coarser particles (> 10 microns) from air stream bfore filtering it on the glass micro fibre filter. special features 1 low noise operations. 2 brushless blower. 3 portable for easy transportation. 4 controlled flow. 5 spm of particle size less than 100 microns. 6 rspm of particle size less than 10 microns. 7 brush less & noise less blower without any belt. principle suspended particles in the air are sampled at 3 constant sampling rates of 0.9 to 1.4 m /min through the inlet of cyclone. By virtue of their momentum, particle greater than 10 microns are carried vertically upward by the air flow and collected on a filter paper of 8 x 10 inch. While coarse dust is collected in a cup placed under the cyclone. technical specification flow rate 0.9 to 1.4 m /min particle size up to 10 micron collected on filter and spm bigger than 10 micron collected in a separate collector cup under the cyclone accuracy + 2% of fsd blower continuous duty blower with noiseless & brushless without belt recommended filter gf/a (8” x 10”) for common use, epm 2000 for special research or equivalent time record 0 to 9999.99 hrs. Time totalizer records the running time in hours timer 24 hr programmable timer power requirement 220 volts, single phase, 50 hz ac main supply.

• Flo Rate: 0.8 to 1.8 m3/min
• Particle Size: Down to 1.6 micron depending upon Filter used
• Blower:: Continues duty blower with brushless Motor
• Recommended filter: GF/A (8” X 10”) for common use, EPM 2000 for Special Research or equivalent
• Time Record: 0 to 99999.99 hrs. Time totalizer records the running time in hours
• Timer: 24 Hr Programmable timer, number of required intervals can be programmed

he high volume air sampler collects suspended particulates on large filter paper The name high volume is appropriate because the sampling flow rate has a high level of 20 to 60 standard cubic feet per minute (SCFM). Because of the high flow rate, large quantities of particles ranging from 0.1 to 1 gram are collected over a typical 24-hour sampling period   Characteristics: Brushless Blower, Low running cost, Low noise operation, Controlled flow, Light weight and small in size, Drain plug for manometer.

• Weight: 30 Kg
• Power Source: Electronic
• Voltage: Nominal 220 V, Single Phase
• Airflow: 1.0m3 /hr (Constant Flow Maintained with the help of critical orifice).
• Frequency: 50Hz AC mains supply.
• Usage Application: For Simultaneously monitoring of Particulate Matter PM2.5 & PM10 or Gases SO2 & NO2
• Item Code: GTI-CDS-401

• Power Source: MANUAL
• Weight: 30 KG
• Airflow: 0.9 - 1.4 m3 /min free flow
• Product Dimension: 430 x 320 x 930mm
• Voltage: 220 Volt
• Usage Application: - Particles of collected on SPM
• Features: Excellent sampling efficiency, Compact design, Enhanced serving life
• Flow Rate: 0.9 – 1.4 m3 /min free flow
• Sampling Time: 28 hours (maximum)
• Item Code: GTI-251

• RDS: Respirable Dust Sampler

We are offering respirable dust sampler. Apm 460 bl is respirable dust sampler also called as pm 10 sampler is used for monitoring pm 10 in ambient air.

A device that is compact, versatile air sampler for monitoring gaseous and particulate pollutants in ambient air and the work - space environment that analyses inorganic gases such as so2, nox. This instrument is small, light in weight, mounted in a compact aluminum case and is fitted with a Diaphragm Pump, a Rota meter and a Pinch Valve for flow adjustment. The instrument is a microcontroller based unit for timer operated function of the system. It comes with a Digital Display Timer and Sampling devices.

Long sampling period simulates work shift,Intrinsically safe, Fully portable with rechargeable battery, Accurate and reliable , DGMS approved.

Particle size: Below 10 microns collected on filter paper and bigger than 10 Micron will be collected in a separate sampling lid, through Cyclone separator. Flow Rate: 0.9 to 1.4m3/min.. Automatic Sampling: By- 24 Hrs Programmable Timer, Time Record Voltage Stabilizer: Auto shut off beyond (170–270) Volts. Filter: GF/A. (20x25)cms. Whatman Brand. Power Need: 220 V. 50 Hz. 1 Phase A.C. Gaseous Sampling: 0.3 to 3 LPM , Manifold, 4 Impingers with Ice Box. ACCESSORIES1. Impinger: 01 No.2. Filter paper 3. Dust Collector Bottles

Get in touch with us for obtaining top quality and accurate Respirable Dust Sampler! We are a renowned Manufacturer, Supplier and Exporter of Respirable Dust Sampler in Delhi, India. Sturdy built, superb finish, hygienic and cost-effective are the highlights of our Dust Sampler, which is why it is extensively in demand. In order to meet the urgent and bulk demands of our buyers, we maintain a huge stock of Respirable Dust Sampler in our state-of-the-art warehouse.

• Type: High Volume Air Sampler
• Application: Air Sampling
• Rated Voltage: 220V
• Power Source: Electric
• Warranty: 1yr
• Automation Grade: Automatic

As air quality measurement norms are going higher and higher day by day,In new air quality standard notified by Govt. of India where measurement of PM10 and PM2.5 dust is required with other pollutants to decide status of air pollution. So far samplers developed in India do not have provision for simultaneous sampling of PM10 and PM2.5 dust. Thus two samplers need to be operated simultaneously to know concentration of these pollutants in ambient air, this results measurement of these parameters expensive and difficult as significant efforts are required in transport of one samplers and their operation in field. This instrument is similar to our other multi sampler model CS-252, but with different PM 10 impactor

• Country of Origin: Made in India
• Weight: 20 Kg
• Airflow: 1.7 m3/hr
• Voltage: 220 V
• Brand Name: KMCR
• Model No.: KMCR-542

• Flow Rate: 0.9 – 1.4 m3 /min free flow
• Voltage: 220 V AC mains supply
• Weight: 45Kg
• SamplingTime: 24 hours (maximum)
• Phase: Single Phase
• Frequency: 50Hz
• Size: 430 x 320 x 930mm

• Flow Rate: 0.8 to 1.5 m3/min
• Flow Rate: 0.9 to 1.4 m /min
• Timer: 24 hr Programmable timer
• Power Requirement: 220 Volts, Single Phase AC

Suspended Particles Matter( SPM) which is defined as particles less that 100 microns & Respirable Suspended Particle less than 10 microns have emerged as the most critical among all the criteria air pollutants & is caused by number of sources like Large, medium & small-scale industries, Road dust construction activities, house hold fuel cooking, waste burning, vehicular emissions etc.

• Features: High collection efficiency from 5 to >25,000nm, No particle bounce

The Series 110 Sequential Spot Sampler instrument enables affordable, time-resolved characterization of particulate chemical composition at multiple locations. It provides an uninterrupted collection of particulate matter (PM) as concentrated dry deposits into small sample wells. PM deposits can be analyzed directly using spectrographic methods, or extracted for wet chemistry analysis.

Respirable Dust Sampler, Gas Chromatograph, Gas Chromatography Machine

High Volume Air Sampler, Dust-Dioxin, Xenon Test Chamber

High Volume Air Sampler, Gaseous Sampler, Handy Sampler

Portable Handy Dust Sampler, Portable Leaf Area Meter

High Volume Air Samplers, Ambient Monitors

Respiratory Dust Sampler, microwave digestion system, Microplate Washer