Dyeing Machines Dealers in Delhi

• Voltage: 220V
• Automatic Grade: Automatic
• Power: 3-5kw
• Driven Type: Electric
• Country of Origin: India
• Warrenty: 2 Years

SMDY ENERGY SAVING The consumption of water, chemicals, electrical energy, thermal energy and the wasted water are important cost factors in every dye house. With this machine all these factors are dramatically reduced, measured and controlled. Right-first-time in dyeing is now assured by lower differences inside-outside the packages, while savings of electric energy, water, chemicals, steam and compressed air will bring extremely fast payback times over the initial investment cost. New SMDY sizes are from 5 kg to 1500 kg. This machine with this particular pump and inversion group allows to treat polyester textured high density till 0,5 Kg/l as well as very soft material like silk 0,3 kg/l density in order to process every kind of material you can have in your dye house. In particular can dye bobbin 1.8 kg cotton, 2,4 kg acrylic, polyester 4 kg or 10 kg tops or muffs, tow, flock or beams   Main advantages are: Possibility to dye with liquor ratio from 1:3.5 using in to out single circulation with material not fully covered. Reduce consumption of chemicals, dyes, water and steam due to low liquor ratio facility. Reduce power consumption of main pump because pipes are designed to avoid losses of pressure so that main pump is exploited in the best way. High efficiency motor and inverter reduces power consumption as well. Possibility to dye also in traditional way: air pad, material fully covered and flow circulation in to out and out to in directions.     Yarn dyeing, reinvented! 70% savings on electric energy 30% savings on water, chemicals and utilities Improved yarn dyeing quality Faster payback times Sustainable yarn dyeing This is our new SMDY yarn dyeing machine! Yarn dyeing, reinvented! 70% savings on electric energy 30% savings on water, chemicals and utilities Improved yarn dyeing quality Faster payback times Sustainable yarn dyeing. SMDY FEATURES: • Standard design and manufacturing features:• Nominal loading capacities from 5 to 1500 kg. • Pressure rating of 5.0 kg/cm2, up to 160°C tempera-ture, temperature lock at 140C.• Construction in AISI 316 stainless steel, for all thepart in contact with dyeing liquor.• Water protected motors (IEC Standards I).• Waterproof electrical equipment • Three-level safety systems..• Heat exchangers rated for 15.0 kg/cm2 operatingpressure.• Heating gradient 5°C./minute (range 20-80°C steampressure 6.0 kg/cm2) Cooling gradient 3°C./minute(range 130-108°C water temp. 15°C, pressure 1.5kg/cm2).• Pneumatic lid lifting and lowering.• Rapid lid locking system.      

• Power: 220/110 V, 50/60 Hz, 4 kW
• Length: 600 mm
• Temperature range: 30-140 °C
• Heating or cooling speed: 0.5– 3.5 °C / min
• Temp. Control accuracy: 1 °C
• Rotation speed: 0-30 rpm (adjustable)
• Dyeing Beaker: 24 pots / 300ml
• Liquor Ratio: 1:5 - 1:100
• Weight: 190 kg
• Width: 750 mm
• Height: 830 mm

• Brand Name: Jogson
• Power: 3 - 115 kW
• Operating Type: Automatic
• Warranty: 12 months
• Minimum Order Quantity: 1 Set

• Automatic Grade: Manual
• Application: Sample Dyeing
• Material: Stainless Steel 304
• Machine Type: Automatic
• Phase: Single Phase
• Operating Temp.: Ambient to 100 deg c
• Wash Motor Power: 1/4-2 HP
• Speed: 32 rpm
• Heat Load: 3 x 2.0 KW
• Maximum rate of rise: 60 C/Min

• Capacity: 250 ml
• Brand Name: NTF
• Machine Type: Automatic, Semi-Automatic
• Power Consumption: 220 Volts Single phase , AC Supply
• Beakers: 250 ml
• Medium used for Heating: Glycerin
• Carriage Rotation: 47 rpm
• Minimum Order Quantity: 1 Piece

• • Automation : Microprocessor Controller: • Heater : 1.5 KW
• • Heating Trough capacity : 800 ml: • Bowl Hardness : 65o-70o
• • Weight : 120 Kg: • Dimenssion : L1030mm X W 650mmX H 790mm

Features :  ·         Versatile machine, can be used for dyeing, printing and finishing trials.. ·         For even pressure throughout, pneumatic loading of the bowl. ·         Small unheated trough provided for padding a small size samples. ·         Nip padding trough and doctor blades available as standard accessories.. ·         2 bowl padding mangle.

• tandard Model: 12x250 ml., 12x100 ml., 6x500 ml., 12x500 ml.
• Main Bath: SS-304 grade
• Outer Body: SS-304 grade
• Beakers: 12x250 ml., SS-316 grade
• Wall Thickness: The jars are provided with the wall thickness of 4mm., which can with stand a pressure of 6 KG./ cm2
• Heating: Electrical heating having a load of 4.5 KW and heating medium is glycerin
• Cooling: through cooling pipe by circulating water
• Display: Digital Display of temperature with digital temp. Indicator cum controller or by a programmer having 99 programs.

The machine is used for dyeing of sample for polyester, cotton and any form of fiber or blended yarn and fabric. The machine is provided in versatile, maintenance free and a compact model and is of immense use for dyeing, processing, research labs, dyes and chemical manufacturers, Educational Institute etc.the machine is complete in stainless steel main bath and outer body made of SS304 and rotor carriage and beakers made of SS316 grade. The beaker carriage rotates at 25 RPM by a ¼ H.P. motor which is directly coupled with the gear box and avoids any kind of coupling, pulling or v-belt drives and ensure the sound free and smooth working of the machine.

High Temperature High Pressure Beaker Dyeing Machine : Why Beaker Dyeing Machines?The Dyer must exactly know the quality of dyeing he may expect to have on his production machine. The cost of dyes, cloth and labor is too high to permit any experimentation with the Production Machines. The Dyer also wants to experiments with various combinations of recipes to get shades above the ordinary.   Why LABIN Beaker Dyeing Machines? The Dyer wants to transfer the experimental results directly on the Production Machines without any adjustment and this is where LABIN Machines become more important. Our Machines are characterized by their ability to exactly do that. The critical test is to put the same recipe in all the Beakers of the Machine and after dyeing to check up whether the shades in all the beakers are identical. LABIN Machines are sure to pass this test without a shade of doubt. While designing the Beaker Dyeing Machines, we have assumed that in laboratories there are no maintenance personnel and hence the Machines should work with practically no maintenance. Also important point is that high temperature can only be achieved by use of pressure either in dye pot or vessel. Construction: All the Dyeing pots are made from stainless steel 316 and rest of the equipment from stainless steel 304. The Machine is complete with their own stand. Only outer body panel and stand are made from mild steel.

• Voltage: 380V
• Main Motor Power (kW): 5.5
• Speed Ratio of Rolls: 1:1.35
• Max. Roll Nip (mm): 4.5

• Maximum Temperature: 135°C
• Electrical Heating Power: from 6 KW to 18 KW
• Time Controller: Digital Control Timer

The Dyer must exactly know the quality of dyeing he may expect to have on his production machine. The cost of dyes, cloth and labour is too high to permit any experimentation with the Production Machines. The Dyer also wants to experiments with various combinations of receipes to get shades above the ordinary.

Specification:Beaker carriage rotating in 360* (25-45RPM) with programmable direction reversal.Flexible beaker carriage suitable to adopt beakers of various capacities (75ml. to 1000ml.) in the same carriage.Automation with microprocessor controller PC-03 having 99 programmer memories. Outside/ inside chamber, beaker carriage and beaker stand of SS304 Beaker -SS 316 material. Auto cooling.  

We are offering dyeing machine. Machine model : 12 x 250ml other models : 6 x 250ml, 6 x 500ml and 10 x 250ml equipment data length width hieght size of jars - 60 x 145 (od x length) no. Of heater - 3 - 2.0 k.w. Each motor hp - 1/8 h.p - 22 rpm beaslay balance weight of rider: 118 mg.

Product Description We are leading manufacturers and suppliers of U Type Jet Dyeing Machine. It has introduced an energy efficient, eco-friendly U Jet Dyeing Machine, which is available in the capacity range of 150, 250, 300 and 400 kg. The material to liquor ratio is 1:2. The jet dyeing machine has a low RPM pump and is almost maintenance-free. Other features include: Low colour-chemical consumption; Reduced operating cost; Simple to operate features:   Sturdy construction; Advanced microprocessor-based programmed controller; Accurate batch cycle.

• Type: Cone Dyeing Machine
• Certification: ISO 9001:2008
• Weight: 100-1000kg
• Color: Grey
• Voltage: 380V
• Condition: New
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Power: 1-3kw
• Driven Type: Electric, Hydraulic, Mechanical
• Warranty: 1year
• Country of Origin: India
• Brand Name: SMW
• Application: HTHP Vertical Tubular Cone Dyeing Machine

Beaker dyeing machine is a versatile, compact and maintenance free apparatus suitable for both Polyster and cotton sample dyeing. Infact it is suitable for dyeing of any fibre in form. The apparatus is of immense use for dyeing and processing units, researchtesting labs, textile engineering institutes and dyes manufacturers.

We are offering beaker dyeing machine. Features:- • used for high temperature dying of fabric and yarn. • used for sample dyeing of yarn fabrics at a max temperature of 98° c. T • made of doubled walled stainless steel technical specification:- • motor: ¼ hp, three phase induction motor, • heaters: 2 kw x 3 heaters, • temperature controller:digital pre-set temperature indicator cum controller • timer: digital type for setting the dying time of the rotor. • models available • 12 beakers x 250ml • 6 beakers x 250ml • 6 beakers x 500ml • 10 beakers x 250ml.

This is a double die automatic machine which requires two people to put paper on both the stations and then machine gives finished product autumatically.You can make different items on both the stations in the same machine.

We offer infrared beaker dyeing machine with microprocessor based programmer- 12 x 250 ml. Other sizes also available.

With Microprocessor based programmer- 12 x 250 ml. Other sizes also available.

• Voltage: 220V, 380V, 240V
• Driven Type: Electric
• Certification: CE Certified
• Color: Black, Brown, Grey
• Condition: New, Used
• Operating Type: Automatic, Fully Automatic, Semi Automatic
• Warranty: 1year, 2years, 5years
• Usage: Industrial Use

• Certification: Calibration certificate and Quality inspection certificate
• Warranty: 1 Year
• Application: Dyeing
• Dimension(L*W*H): 711 mm x 355 mm x 584 mm
• Packaging Details: Standard export Packaging for Safe Transportation.
• Features: Advanced Infrared Heating Technology
• Condition: New
• Production Capacity: 5-10 pcs
• Automatic Grade: Automatic
• Place of Origin: Delhi, India
• Port: New Delhi
• After-Sales Service Provided: No overseas service provided
• Model Number: dyeMASTER i5 (Table Top)

• Voltage: 420 Watt (w)
• Feature: ECO Friendly Low Noice Lower Energy Consumption Compact Structure High Efficiency
• Control System: Manual
• Warranty: 1 Year

The Cheese Dressing making machine is a specialized equipment designed to efficiently produce cheese-based dressings and sauces. This machine is specifically engineered to handle the mixing, blending, and emulsifying processes involved in creating creamy and flavorful cheese dressings. The machine features a robust construction with stainless steel components, ensuring hygiene and durability. It is equipped with a powerful motor and precise controls to achieve consistent and uniform mixing results. The mixing chamber is designed to accommodate the desired batch size, allowing for efficient production.   The Cheese Dressing making machine incorporates advanced technology to ensure optimal emulsification of cheese and other ingredients. It effectively blends the cheese with other components such as oils, vinegars, herbs, and spices to create a smooth and creamy dressing with the desired flavor profile. The machine may include additional features such as temperature control, allowing for precise heating or cooling during the mixing process. This ensures that the cheese dressing reaches the desired consistency and maintains its quality. Furthermore, the Cheese Dressing making machine is designed with easy-to-clean components and accessible parts, facilitating quick and thorough sanitation. This helps maintain the highest food safety standards and minimizes downtime during production. By utilizing the Cheese Dressing making machine, food manufacturers can optimize their production processes, enhance product consistency, and improve efficiency. It enables them to meet the growing demand for high-quality cheese dressings while ensuring reliable and hygienic manufacturing practices.  

We are offering hthp beaker dyeing machine. Nnodye glycerine bath hthp beaker dyeing machine is a versatile, compact and maintenance free apparatus suitable for both polyster and cotton sample dyeing. Infact it is suitable for dyeing of any fibre in form. The apparatus is of immense use for dyeing and processing units, researchtesting labs, textile engineering institutes and dyes manufacturers.

• Automation Grade: Semi-Automatic
• Material: Cast Iron
• Brand: REVO
• Usage/Application: Industrial
• Max Stitch Length: 3.5 mm
• Voltage: 220 V
• Phase: Single Phase
• Frequency : 50-60 Hz
• Driven Type: Electric
• Presser Foot Lift: 5 mm
• Stitch Width: 6.5 mm
• Speed: 1800 Rpm

HTHP Beaker Dyeing Machine, Shear Fatigue Tester

dyeing jigger machine, Jobworks, dyeing winch machines, dyeing cotton fabric

Jet Dyeing Machines, Leather Jacket, Leather Accessories, leather clothing