Ecosens Lighting Pvt. Ltd. Rohini, Delhi

Max. Voltage : 220V-240V AC 50Hz

Accuracy : +/-1minute per month

Measured or otherwise detected, and the passage of heat energy into or out of the space is adjusted to achieve a desired average Temperature.

New version 20LED smd outdoor motion sensor solar led outdoor wall light  

Photoelectric Smoke Detector EL-S01, Properly installed and maintained. Residential smoke alarms, are one of the best and least expensive ways to provide an early warning when a fire begins. Smoke alarms save lives, prevent injuries and minimize property damage by alerting resident early to a fire hazard. Specification: 9V Battery Operated Photoelectric Sensor Display:Two-Tone LED light indicator Mini size Low battery warning Features CE, EN14604 certificate Mini size smoke detector Photoelectric Sensor 9V battery operated Low battery warnning indicator Two tone LED light display, Flash alarm indicator (red LED) , Power indicator (blue LED) Auto Test button for easy recommended monthly testing Ceiling or wall mounted Suitable for any rooms Loud 85dB alarm signal

Motion Detector Alarm with remote control. It utilizes human motion infrared rays as control signals, when human enter detection fields, it will start the sound system (alarm) to call attention that person enters detection fields; Turn on and off with the remote control. More than 100dB of sound. Four “AA” type batteries or an AC-DC adaptor to work. Wall mounting installation set included. It covers 6 to 8m space on an 110°angle. it will give safety you never have for your family and travel ; Its using range is wide and its installation is easy. SPECIFICATION FOR RECEIVING: Battery: 4×1.5VDC Detection Range: 110° Detection Distance: max.8m(

This product is a new type of energy-saving lighting switch, it adopts high sensitivity detector, integrate circuit and SMT; It gathers automatic, convenient, safe, energy-saving, practical functions; It has wide detection range made up of up and down, left and right service field; It utilizes human motion infrared rays as control signal sources, when one enters the detection field, it will start the controlled load at once; It can identify day and night automatically; It is easy to install and its usage is wide; It has the function of power indication and detection indication.

DayNight Sensor can automatically turn on or off lights at dusk and dawn. It is not only convenient but also practical; it can control the lighting loads by working only at night. Examples of use are street lights, office lights, warehouse and factory lights, garden lights, etc. Its also known as Photocell Sensor, Light Sensor, Dusk to dawn sensor, Street light sensor, Day night Sensor, LDR Sensor.

The product can turn on or turn off light according to ambient-light; Ambient-temperature and humidity can't affect it. It is not only convenient but also practical, it can control the load working only at night. For instance road light, garden light etc. Its also known as Photocell Sensor, Light Sensor, Dusk to dawn sensor, Street light sensor, Day night Sensor, LDR Sensor.

The product adopts good sensitivity detector, integrated circuit. It gathers automatism, convenient safe, saving-energy and practical functions. It utilizes the infrared energy from human as control-signal source, it can start the load at once when one enters detection field. It can identify day and night automatically. It is easy to install and used widely.

Brand Name : ecosens

Color : White

Battery-operated LED motion sensor lights that turn on and off automatically. Installs indoors or outdoors without wires to light up stairs, hallways, bathrooms, decks, RV's, boats and many other dark areas. Bright LED never needs replacing. Weatherproof design holds up through rain and snow. Motion sensor detects at 15 to activate light. Automatic shut off turns light off after 30 seconds.

The sensor is an active motion detector, it emits high-frequency electro-magnetic wave ( 5.8GHz ) and receives their echo. The sensor detects the change in echo from even the slightest movement in its detection zone. A microprocessor then triggers the "switch light ON" command. Detection is possible through doors, panes of glass or thin walls. The microwave sensors is according to the microwave doppler effect , it can be widely used in as automatic control switch, the security system, and Automatic video control system of ATM, as well as other automatic induction control area. he Detection way has the below advantages compared with other as follows: 1. Non-contact Detection, 2. Suitable for bad environment, immune to temperature, humidity, noise, air, dust, Light^ 3. RF interference ability, 4. Transmission power only 0.2 mW, It will not harm the human Body. Simple installation+ easy wiring. We use appropriative micro processing integrator, not Only for high sensitivity and wide range of detection, and on very reliable work, error rate is Extremely low, It can stable working on the temperature range: – 15 ~ + 70 Celsius degrees. Important: persons or objects moving towards the sensor are detected best! NOTE: the high-frequency output of this sensor is < 10Mw- that is just one 100th of the transmission power of a mobile phone or the output of a microwave oven.

The product can turn on or turn off light by automatically according to ambient-light. Ambient-temperature and humidity can't affect it. It is not only convenient but also practical; it can control the load working only at night. For instance road light, garden light etc. Its also known as Photocell Sensor, Light Sensor, Dusk to dawn sensor, Street light sensor, Day night Sensor, LDR Sensor. For street light. It has voltage protection.

The LED lamp connected to the output of the IR Sensonr switch will trun ON when the hand pass over the IR switch within 10cm in distance, and will turn OFF when the hand pass over again. The sensor switch will turn ON or OFF with above repeatable steps Function:The LED lamp connected to the output of the IR Sensonr switch will trun ON when the hand pass over the IR switch within 10cm in distance, and will turn OFF when the hand pass over again. The sensor switch will turn ON or OFF with above repeatable steps.Detective Distance:5 to 10cm.

The product is a new saving-energy switch; it adopts good sensitivity detector, integrated circuit. It gathers automatism, convenience, safety, saving-energy and practicality functions. The wide detection field is consisting of detectors. It works by receiving human motion infrared rays. When one enters the detection field, it can start the load at once and identify automatically day and night; its installation is very convenient and its using is very wide. It has functions of power indication and the detection indication.

The LED lamp connected to the output of the IR Sensonr switch will trun ON when the hand pass over the IR switch within 10cm in distance, and will turn OFF when the hand pass over again. The sensor switch will turn ON or OFF with above repeatable steps Function: The LED lamp connected to the output of the IR Sensonr switch will trun ON when the hand pass over the IR switch within 10cm in distance, and will turn OFF when the hand pass over again. The sensor switch will turn ON or OFF with above repeatable steps.

Country of Origin : India

Max. Voltage : 110V

Mechanical Life : 1 Year

detects natural gas, lpg, and coal gas etc. Combustible gases. specification gas leak detector alarm220v, 12v, 9v battery back uplow battery and fault warningconnect with solenoid valvece,en50194 features ce, en50194 approved gas leak detector/alarm; 5 years lifetime, high accurate hot wire type sensor. detects natural gas, lpg, and coal gas etc. Combustible gases. power supply : 90-240v ac+ 9v battery back up, automatic switch between ac & dc power. three indicators (3 different led lights display): power (green), alarm( red) , fault (yellow). 10% lel sensitivity. simple installation, ceiling or wall mounted. sound(85 decibel) and flash alarm. test/reset button; can be connected with auto shut off solenoid valve.

A float switch is a device used to detect the level of liquid within a tank. The switch may be used in a pump, an indicator, an alarm, or other devices.   A very common application is in sump pumps and condensate pumps where the switch detects the rising level of liquid in the sump or tank and energizes an electrical pump which then pumps liquid out until the level of the liquid has been substantially reduced, at which point the pump is switched off again. Float switches are often adjustable and can include substantial hysteresis. That is, the switch's "turn on" point may be much higher than the "shut off" point. This minimizes the on-off cycling of the associated pump. float switches contain a two-stage switch. As liquid rises to the trigger point of the first stage, the associated pump is activated. If the liquid continues to rise (perhaps because the pump has failed or its discharge is blocked), the second stage will be triggered. This stage may switch off the source of the liquid being pumped, trigger an alarm, or both.

The product can turn on or turn off light according to ambient-light; Ambient-temperature and humidity can't affect it. It is not only convenient but also practical, it can control the load working only at night. For instance road light, garden light etc. Its also known as Photocell Sensor, Light Sensor, Dusk to dawn sensor, Street light sensor, Day night Sensor, LDR Sensor.   Specification 1 Power source:220-240V/AC. 2.Rated Current: 6A. 3.Ambient Light:5-50LUX. 4.Application fields:Street lamp and road light, garden light etc. Installation (see the figures) Switch off the power, connecting the wire as per the following figure. Please install the item with the correct orientation (see figure A) what shows in the metal bracket and according to the correct installation place with the enclosed inflated screws.