Electro Hydraulic Brake Dealers in Delhi

We offer precision-engineered range of Electro Hydraulic Thruster Brakes. These brakes are ideally used to retard the speed of moving machinery. They are fabricated from the best grade raw materials and advanced components. Proper industrial rules and regulations are followed during the production of these brakes. We are a well-established Electro Hydraulic Thruster Brakes Manufacturer and Supplier from Delhi (India). The products delivered are thoroughly tested on various parameters to ensure their quality and durability.   Working To stop the moving machinery accurately to the desired position the braking force is applied to the brake shoes by a pre-stressed comprising spring. The shoes press on the rotating brake drum retarding its speed and finally stop it. The releasing of the bake drum and compressing of the spring is done by thruster.   Features Gentle application & release of brake without jerks & shocks Compact unit Constant magnitude Self aligned movement Low  power consumption Minimum maintenance Easy mounting and dismounting    Assembly & FunctionA thruster shoe brake has a pair of cast iron shoes which are lined up with friction pads. The shoes are hinged on main arm and side arm of the brake, each of them have a hinge pin fitted in the base. They are connected to each other on top by a tie rod, which is hinged in the main arm and locked to the swivel block in the side arm, by a lock nut. A crank lever is hinged on the main arm and the other end is fixed to the top clevis of the thruster by a hinge pin. A brake spring is fixed on the main arm and is pre-loaded by a lock nut on the lever. The pre-tension in this spring decides the braking torque. The thruster is fitted on the base drum by a hinge pin. When the thruster is not energized, the brake shoes are pressed on the brake drum fitted on the drive motor shaft and hold it under the effect of braking force provided by the spring. In such condition, the brake is applied and the drum cannot rotates the piston travels upwards the angle lever turns, pushes the brake rod and compresses the brake spring. Simultaneously, the brake lever on the other side of the wheel (Brake Drum) is retracted. When the first lever reches the stop on the brake base member the brake lever at the thruster begins to move, releasing the brake drum.  

Speedage make Gravity (Counter Weight) Limit Switches are used for Heavy duty E.O.T. Cranes, Hoists, to prevent over travel of hoisting motion on power and control circuit up to 500 v.a.c., 50 cyclessec. and 40 Amps. continuous current. The housing of Gravity Limit Switch is made of cast iron Cast aluminium (IP 54).

Electro Hydraulic Thruster Brakes, control gear equipment, Master Controller

electro hydraulic brake, 240 VAC High Limit Switches, Solenoid Components