Electronic Test Instruments Dealers in Ajmeri Gate, Delhi

• Warranty: 1 Year
• Model Name/Number: FLUKE 113
• Brand: Fluke
• Digit Display: 4 Digit
• Features: VCHEK™ LoZ low impedance measurement function to simultaneously test for voltage or continuity,True RMS for accurate AC measurements on non-linear loads,A large backlit display allows for easy visibility in low-lit areas

• Type:  Multimeter
• Certification: ISI Certified, ISO 9001:2008
• Application: Control Panels, Industrial Use, Power Grade Use
• Color: Green, Grey, Light Green, Multicolor, Sky Blue, White
• Condition: New, Used
• Frequency: 45Hz, 66Hz
• Power Source: Battery, Electric
• Feature: Easy To Use, Electrical Porcelain, Four Times Stronger, Proper Working, Superior Finish, Water Proof
• Warranty: 1year, 2years
• Operating Current: Double Phase, Single Phase, Triple Phase
• Automation Grade: Automatic, Semi Automatic, Automatic Fully
• Puncture Voltage: 220V, 440V
• Temperarture Capacity: High Temperature, Low Temperature, Medium Temperature
•  :  
• Display: LCD Display
• Measuring Capacit: 100mF
• Capacitance:: 10mF

• Type: Analog
• Feature: Accuracy, Easy To Use
• Power Type: AC
• Frequency: 0-50Hz
• Phase: Single
• Material: Mild Steel
• Mounting Type: Floor Mounted

• Display: LED 4 digit for Flow Rate & 9 Digits for Total Flow
• Line Size: 15 NB to 600 NB
• Accuracy: +/-5 Percent of FS (20 to 100percent flow)
• Repeatability: +/- 1 Percent
• Brand: Micro
• Media: Liquids (Conductive)
• Conductivity: 5 us,/cm
• Viscosity: 200 Cp max
• Excitation: Pulsed DC Coil
• Type of Output: 4 to 20 mA DC Isolated, Pulse
• Linearity: +/-5 Percent

Flow Meter is available for Argon and CO2.It is used with regulator or pipeline distribution installation.

• Weight: 300 gms (Approx.)
• Body: Brass
• Supply Range: 2 – 40 Lit.\\Min
• Inlet Pressure: 6 Bar (Max.)
• Outlet Connection: 3/8” BSP (RH)
• Inlet Connection: 3/8” BSP (RH)

The Gravity Flow meter is accurately designed to give true easy to read flow measurement for Mig and Tig welding. The Gravity Flow Meter is built to be durable, long lasting product with brass body and shatter resistant polycarbonate tube.   Applications Used To Fine Control & Display The Flow Rate Of Shielding Gas To The Welding Torch.   Features Forged brass body resists corrosion Sensitive brass needle valve for fine adjustment. Soft valve seat for leak tightness. Impact resistant polycarbonate tubes for strength. Clear flowtube with large ,easy to read readings Easy to operate plastic moulded knob.

We Offer 96 Mm Three Phase Digital Panel Meter volt , Ampere, & Frequency.

• Certification: CE Certified
• Weight: 100-200gm, 200-300gm
• Color: Available In Many Colors
• Voltage: 3-6VDC, 6-9VDC
• Display Type: Digital
• Frequency: 50Hz-65Hz
• Automatic Grade: Automatic, Fully Automatic
• Material: Aluminum, Brass
• Power Source: Battery, Electric
• Warranty: 1Year
• Application: Indsustrial Usage

• Brand Name: Lumel Poland
• Display: Digital
• Memory: 8 GB
• Dimensions: 150 x 100 x 30 mm
• Voltage: 12 V d.c.
• Warranty: 12 Month
• Weight: 0.3 kg
• Usage/Application: Industrial
• Protection Class: IP20
• Model: HT25
• Frequency: 0.1 - 100 Hz

• Warranty: 1 Year
• Model Name/Number: DM 86
• Brand: HTC
• Digit Display: 4 Digit
• Usage/Application: Industrial
• AC Voltage: 1000 VAC
• Operating Temperature: 55
• DC Voltage Accuracy: .02
• Battery: 9 VDC
• Resistance Range: 200 Mohm

• Model Number: 830L
• Brand Name: HTC
• Other Names: Multimeter

• Rated Power: AAA1.5V*2
• Projecting Angle: 60º
• Measure Range: 0-200 GU
• Stability: < ± 0.4 GU/ 30 min
• Value Error: < ± 1.2 GU
• Environmental Temperature: 0ºC - 40ºC
• Relative Humidity: ± 85%
• Dimension: 145*79*38mm
• Weight: 380gm

Made By : Trusize       PRODUCT FETURES  The GLOSS METER 60 Deg. is complete according with state standard GB9754-88, GB9966.5 and international standard ISO2813,  all items of the performance reach to the state JJG696-2002 ( Lens Luster Degree Instrument Measure Test Regulations ) the first  class work requirements. Projecting angle :  60 Deg. Applications : • The Surface luster measure for printing ink, oil paint, bake lacquer, coat,    woodwork and others. • The Surface luster measure for construction decoration materials: Marble;   granite; glass chemical    polishing brick, pottery brick and etc • The surface luster measure for plastic, sheet and others • The surface luster measure for other non-metal materials Technology Parameter:

• Material: Metal
• ohms law: 3500.00

1. All the parts requried are gathered sepratly. No hotchpotch of wires asthe experiment will be nicely done with patch cord. 2. A regulated 1v (100ma) power supply provided to perform experiment i.e no changof in observation any time you do experiment.the result will be the same. 3. The power supply is shortcircuit protected. 4. Four resistence has been provided for series and parallel connection and to calculate figure of merit. 5. With this kit anyone can perform experiment with in five minutes. 6. Results may differ due to non linearty of the analogue meter, the problem will be eleminate by using digital meter.

• Warranty: 1Year
• Digit Display: 4 Digit
• Usage/Application: Industrial
• AC Voltage: 600v
• Battery: Inbuilt
• Usage/Application: Commercial

• Feature: Nominal rates, Quality assured, Small Size,
• Brand: FLUKE , MECO , MEXTECH , KUSUM MECO
• Usage/Application: INDUSTRIAL & ELECTRIC
• Diode Test: Yes
• Auto Power Off: No

CLamp meter

• Type: Portable
• Certification: CE Certified
• Application: Industrial Use
• Frequency: 45Hz
• Power Source: Battery
• Warranty: 1 Year
• Display Type: Digital

• Phase: Three Phase
• Voltage: 220 V/380 V
• Material: Plastic
• Frequency: 50 HZ
• Usage/Application: Industrial
• Usage: Industrial, Laboratory

• Type: Field Strength Meter
• Material: Aluminum, Brass, Cast Iron, Copper, Plastic, Stainless Steel
• Color: Brown, Green, Grey, Maroon, Red, White, Yellow
• Feature: Accuracy, Digital Water Meter Display, Lorawan Compatible, Multi Jet, Spiral Water Meter
• Voltage: 110V, 220V, 230V, 380V, 440V, 450V
• Application: Industrial, Residential
• Operating Temperature: 10-50D/C, 50-100D/C
• Automatic Grade: Automatic, Semi
• Driven Type: Electric
• Certificate: CE Certified, ISO 9001:2008
• Display: Local, Remote
• Warrenty: 1 Year, 2 Years, 6 Months

Mastech M92A(H) Digital MultiMeter     Mastech Digital Multimeter, M92A (H) is a highly versatile device and comes with a number of interesting features like data hold, diode tests, hfe tests and auto power off. It is also equipped with a low battery indication and continuity checking with buzzer. The multimeter can make up to 1999 counts.   - DC Voltage Range (Volts): 200mV-1000V - DC Voltage Accuracy: ± (0.5 percent +3)- AC Voltage Range (Volts): 200mV to 700V;- AC Voltage Accuracy: ±(0.8 percent +5)- DC current range (Amp) 20uA - 10A;- DC current accuracy ± (1.0 percent +5)- AC current range (Amp) 20uA - 10A;- AC current accuracy ± (1.8 percent +5)- Resistance range (Ohm) 200Ω - 200Mâ�¦;- Resistance accuracy ± (0.8 percent +3) - ±5 percent

• Display Type: Digital, Analog
• Model Name/Number: MAS380L
• Material: Plastic
• Brand: Mastech
• Digit Display: 4 Digit
• DC Current Accuracy: 10ADC

• Warranty: 1 Year
• Feature: Super precise accuracy
• Brand: Hioki
• Usage/Application: Industrial
• Safety Rating: 100%
• Auto Power Off: Yes
• Low Battery Indication: Yes

• Display Type: Digital
• Model Number/Name: AE Digital Panel Meter
• Brand: AE
• Usage/Application: Industrial
• Size/Dimension: 96x96 mm

• Model: CM-2056
• Range: 0-1000 Amp AC/DC

• Type: Energy Meter
• Certification: CE Certified, ISO 9001:2008
• Color: Brown, Green, Grey, Maroon, Red, White, Yellow
• Application: Energy Monitoring
• Automatic Grade: Automatic
• Body Material: Aluminum, Brass, Cast Iron, Copper, Plastic, Stainless Steel
• Power Source: Battery, Electric
• Feature: Accuracy, Durable, Light Weight, Lorawan Compatible, Low Power Comsumption, Multi Jet, Stable Performance
• Warranty: 1Year, 2Years

• SKU: BHI-YOILP-1011-1
• Weight: 15000.0000 g
• Brand Name: Bellstone