Back Back
Electronic Twist Tester
Get Price Quote
Data Cable Testing Machine
2,500 Per Piece
1 Piece (MOQ)
Best Deals from Electronic Testers
Unbreakable Line Tester
11 Per Piece
100 Piece (MOQ)
Line Tracing Snail Kit (VPL-RAT-LTS)
Get Price Quote
The Line Tracing Snail uses a special LED sensor to detect a black line (magic marker, etc.) drawn on a white background. It uses two small motors and rubber tires to slowly but surely move forward and turn. The body of the snail is made of transparent (HIPS) plastic to allow viewing of the intricate mechanisms inside. The snail emits an infrared light from the Light Emitting Diode on the underside of its chassis. A photo transistor picks up the reflection of the infrared light to distinguish black from white surface. Transistor sensitivity can adjusted to adapt for a variety of paper sizes and line widths. Snail eyes move in-synch with tires. Snail capable of low/highspeed setting. Low-speed mode suitable for fine lines and narrow areas. High-speed works best for wide areas and thick lines. Snail follows the line without fail. Draw a line on a white surface with an oil based black pen. Tamiya Paint Marker is ideal. Draw curve radius over 8cm, line width over 3mm. (2) Type 130 motors (sensor unit and motor come pre-wired). Max. running time (w/ alkaline batteries): low-speed- approx. 2hrs., high-speed- approx. 3hrs. Uses two R6/AA/UM3 batteries (sold separately). Note: Strong sunlight or lamp light may interfere with sensor. Please use product indoors or in shady areas. Adjust transistor sensitivity and line width to best suit snail running environment.
Cable Tester
550 Per Piece
line tester
50 Per Pair
1 Piece (MOQ)
line tester
Get Price Quote
electronic milko tester
22,000 Per Piece
Electronic Brinell Hardness Tester
650,000 - 700,000 Per Unit
Network Cable Tester
1,000 - 1,500 Per Piece
1 Piece (MOQ)
Lan Tester with Bnc
Get Price Quote
150 Piece (MOQ)
Automatically runs all tests and checks for continuity, open, shorted and crossed wire pairs. Visible LED status display. Cable state testing (2-wire): Line DC detecting, anode and cathode determination,Ringing signal detecting open, short and cross circuit testing
Automatic Line Tester
7,500 Per Piece
1 Piece (MOQ)
line tester
15 Per Piece
100 Piece (MOQ)
Photometric Test Panel
48,000 Per Piece
Phone Line Tester
135 Per Piece
Electronic VE Pump Tester
25,000 Per Piece
electronic milko tester
Get Price Quote
Product Code:829450 Grade:, Laboratory Reagent (LR), Packings :52.6 gmProduct Code:829450 Grade:, Laboratory Reagent (LR), Packings :52.6 gmProduct Code:829450 Grade:, Laboratory Reagent (LR), Packings :52.6 gm
Electronic Brinell Hardness Tester
Get Price Quote
The EHB-3000A/3000E Brinell hardness testing creates the largest indentation comparing all other hardness testing methods. It is able to reflect the comprehensive features of the material, and is unaffected by the microstructure and inhomogeneous of the specimen. So it with high precision and widely used in industry such as metallurgy, forging, casting, unhardened steel and nonferrous metals, as well as in the laboratories, universities , and scientific research institutes.EHB-3000A/3000E Tester conforms to:ISO6506 Metallic Materials-Brinell Hardness TestASTM E-10 Test Method for Brinell Hardness of Metallic Materials SPECIFICATION Innovative closed-loop technology. The tester incorporates the latest load cell technology. The test load is applied via a closedloop control unit with a load cell, a DC motor and an electronic measurement and control unit. The result is highly accurate measurements at all test loads up to 0.5%. The common load overshoot or undershoot as known from traditional dead weight, or open-loop, systems is eliminated. The absence of mechanical weights not only eliminates friction problems but also makes the equipment less sensitive to misalignments caused by vibrations. The whole weight of the tester is 50% less than the traditional deadweights type tester. Test load selection by keyboard and LCD screen. No need of handling heavy weights or cleaning the messy oil. Fully automatic test cycles. The hardness Tester features a fully automatic test cycle, load application, holding, unloading, is performed fully automatically. This greatly improvesreproducibility of test results since operator influence is eliminated. Selectable dwell times by screen. The indenter, load, and other test informations are showing clearly on the large LCD screen. The directions for 0.102F/D2 ratios selecting according to the materials and hardness range can be showing on the screen. Equipped with the special Brinell indention measure system which can measure the Brinell indention accurately, quickly, reliably. It is a new measuring method by using CCD camera to capture the indention image, instead of reading diameter from optical icroscope by operator then calculating the test value. The EHB-3000A tester can connect any PC with USB port and runing the SPC software, then the special software supplying simplest operation as following. Both single testing and batch testing mode are available Tolerance setting, distinguishing and alarming Statistics values such as Max, Min, Avg, R and S are available Convert test result to other scales, such as HRC,HRB,HRA,HV,ób All test results and indention images are saved automatically Test report created in Microsoft EXCEL format, can be edit, copy, print as you will Software update freely
Electronic Twist Tester
Get Price Quote
1 Piece(s) (MOQ)
We are offering electronic twist tester electronic twist testers to determine yarn twist in single or plyed yarns, untwist / re-twist method specifications: yarn length 25 to 1000mm (adjustable) tension on the yarn 0 to 100 gm dc motor operated for s/z yarns (reverse and forward movement of motor).
BHI - ATSM - 1150 Electronic Milk Fat Tester
Get Price Quote
With exceptional transportation facilities, our diligent team delivers the product basket in the committed time span. We have massive and well-organized warehouse, divided into specific areas in order to automate inbound, outbound and in-stock operations, due to which we are capable of making quick deliveries in the less time.
LED Light Performance Tester
17,000 Per Piece
25 Piece (MOQ)
line tester
20 Per Piece
200 Piece (MOQ)
Electrical Line tester
10 Per Piece
LAN Cable Tester
Get Price Quote
USB Data Cable Tester
Get Price Quote
Adraxx RJ45 And RJ11 Network Cable Tester
Get Price Quote
The base unit of the cable tester can be connected via a network cable directly to a hub or switch to test wire connections, or to a network card to test the send receive pairs of wires, it can test if there is any open or miss-wire without the remote kit. 9 Led's to show you exactly which wire is open or miss-wire on both remote and master unit. Network Cable Tester can judge wrong connection, short circuit adm open circuit Build in power switch for power saving RJ45 Network Cable Tester test correspondingly double-twisted cables 1, 2, 3, 4, 5, 6, 7, 8 and Ground 9 LED lights to indicate wiring connection on both remote and master unit Auto scanning function for rapid testing
Electrical Line tester
135 Per Box
Network Cable Tester
1,500 - 1,595 Per Piece
Digi Twist Electronic Programmable Digital Twist Tester
Get Price Quote
digiTWIST i2TM (Electronic Programmable Digital Twist Tester) digiTWIST i2TM consists of a fixed base on which the main scale is provided to set the length of the specimen yarn. A panel board is mounted on the right hand side of the base to control and perform all operations of the instrument. On the left hand side of the base, the tensioning device is provided to hold the yarn. This tensioning device is mounted on a moving carriage having stationery yarn gripper Jaw, elongation scale, tension (elongation relief ) stoppers and a tension weight pan. The moving carriage can be adjusted up to 20 inches50 cms to set the length of the specimen yarn. A Carriage knob is provided on the moving carriage to lock it at any required gauge length. The rotating jaw (gripper) is mounted on left hand side of the control unit which is directly coupled with a high procession DC motor. A spring loaded jaw is provided in the rotating jaw to hold the specimen yarn.
