Environmental Test Chambers Dealers in Delhi

• Country of Origin: India
• Type: Environmental Test Chambers
• Certification: CE Certified
• Application: Industrial Use
• Color: AS PER DEMAND
• Voltage: 220V
• Condition: New
• Power: 1-3kw
• Driven Type: Electric
• Phase: Single Phase
• Warranty: 1year
• Automation Grade: Automatic, Fully Automatic, Semi Automatic
• Brand Name: NSLI INDIA
• Temperature: 100

• Power Supply: 230/415 Volts ± 5 %, Single/Three Phase, AC power supply
• Temp. Range: -40°C to 150°C
• Standard: IS-9000, JSS-55555, JS-50101
• Humidity: 20 to 98% RH ± 3 %.
• Heating: Average rate of 1oC / minute (empty chamber).
• Cooling: Average rate of 0.40oC / minute (empty chamber).
• Gradient in space: Less than ± 1.5oC.

We are Manufacturing Environmental Test Chamber for customers in India and overseas. We are a recognized Environmental Test Chamber Manufacturer, Exporter and Supplier. Our Environmental Test Chambers are precisely designed by our domain experts as per the set industrial standards and norms. Environment Chamber Chamber  : Double Walled Exterior Chamber : Made of Heavy Duty Mild Sheet with three coats of paint. Interior Chamber : Made of Heavy Duty Stainless Steel Sheet 304 qlty. Insulation  : The Interior Chamber is insulated with with 150 mm thick glass wool and Puff Insulation all around for ordering to limit radiation. Door : A full front opening door, double walled insulated and interior lined  with Stainless Steel will be provided for ensuring full access to the working space inside the  chamber. Gasket : Two gaskets, one on the chamber and the other one for leakproofness  at the door, are fitted. Locking System : The door is also provided with heavy duty hinges & latches with toggle type locking arrangement. Portability : Trolley mounting with casters for easy portability. Air CirculationThe homogeneous condition of temperature inside the chamber maintaining by a forced blower with continuous duty rated TEFC motor for circulation. The conditioning space in the main chamber is baffled and heater and cooling coil is located in the conditioning space. The refrigeration unit is fitted under the chamber so as to ensure minimum space utilization. Heating SystemLow surface loading sealed tubular heaters conforming to IS-4159 provided to add heat in the chamber. The heaters are located in the conditioning space and there will not be any direct radiation of heat on the item under test. Humidity SystemLow-pressure moisture generator will be provided to generate moisture and add humidity in the chamber. The generator will be of minimum water level controller and mechanical float type refilling arrangement. Soft water will be used for the moisture generator. Refrigeration SystemTwo-stage air cooled cascade refrigeration system will be provided with evaporative cooling attachment for working in high summer ambient condition. The system is fitted with HP/LP cut off switch, overload protector, backup fuse protection etc. Low RH condition is maintained by smooth tube evaporation coil dehumidification arrangement.Controller Microprocessor Based Programmable Controller for Temperature and RH with Printing Facility. Control Panel & Wiring Control Panel will be provided at the lower side of the chamber, which will house Microprocessor Based Programmable Controller for Temperature and RH with Printing Facility, On/Off Switches, Fuses, Contactors, Digital Volt Mater, Digital Ampere Meter, Limit Switch, MCB and Indicating Lamps etc. All the channel type wiring will be as per IS code.                                                                                                                     Safety Protection Back up fuse protection for mains and individuals circuit. Over temperature safety cut off thermostat with audiovisual alarm. Overload protector for motor. HP/LP cut off switch for compressor. MCB for heaters. Minimum Water Level Controller with Mechanical Float Type refilling arrangement will be provided. Utilities One Stainless Steel bar shelf with adjustable height arrangement will be provided. Window  : 30 cm x 30 cm, 2 pane with low wattage heater. Chamber drain.

We are leading supplier of Environmental chamber

• Application: Industrial Use
• Voltage: 220V
• Power: 1-3kw
• Driven Type: Electric
• Warranty: 1year
• Automation Grade: Semi Automatic

All purpose chamber confirming to stricter specifications, specifically designed for drying environment of plant and animal growth, investigation of vapour, proofness of packed materials, determinations of di-electric strength, insulation tests of electrical components and many other tests requiring an atmosphere of controlled temp. and humidity. The sturdy double walled construction provides a pleasing get up. The interior walls are made of heavy gauge Stainless Steel 304 Qlty. The exterior is made of heavy gauge Mild Steel finished in Epoxy Powder Coating. Insulation of 63mm by puff. The door is of massive construction having window and seals against atmospheric infiltration by resilient asbestos and rubber gasket.   The temperature can be controlled from 10 ºC to 60 ºC +/- 2 ºC and humidity 55% to 95% +/- 5% is controlled by an automatic microprocessed Electronic Controller with digital display of temperature and humidity. Temperature below ambient is created by a hermetically sealed compressor (CFC FREE) complete with its all accessories provided at the bottom of the unit. Two water tank of Stainless Steel 304 qlty. have been provided in the cabinet. The humidity inside the chamber is created natural mist through heat, vapour with suitable automatic voltage stabilizer.  Heated water vapours are also circulated   through blower. With servo Voltage Stabilizer. We have provided and exhaust fan in the control panel to take out heat  as well as humidity with inside panel for the safety of the components inside on control panel. and extra water storage tank has been provided at the top which should be filled by  distilled water only for the long life of heating element and lower water tank.   Features: Universal inputs for temperature & % RH in-built Ecitation voltage for external transmitters. Independent self tune PID control loops for temperature & % RH SSR drive control outputs for heating, hmidification, compressor, alarm & safety Compressor switching with programmable time delay PV or SP based compressor switching strategies Two separate, user configurable, PID Control zones, compressor–on & compressor-off. Smart water level detection with alarm Accurate automatic water filling mechanish RTC based illumination control system Intelligent door-open sensing & alarm Comprehensive alarms and safety set-points PV and even date recording PC configurable header/footer for printer interface Highlights: 4.3” or 7.0” TFT colour screen with touch panel In-built huge memory of data logging 8/16 channel uniformity logger interface Serial port for PC interface Ethernet / Wi-Fi LAN Connectivity USB port for printer & pen-drive interface 21 CFR complaisance PC software Integrated web based software Standby refrigeration control module GSM interface module for SMS on alarms SIZE INSIDE CHAMBER (STAINLESS STEEL 304 Qlty) W        D        H                    455 X 455 X 710MM               147 Ltrs. 605 X 605 X 605MM               225 Ltrs. 605 X 605 X 910MM               335 Ltrs.

Manufactured using quality tested mild steel sheets with three coats of paints; the Environmental Test Chamber has reliable performance. We are reliable Manufacturer, Exporter and Supplier of Environmental Test Chamber from New Delhi, India. The offered Environmental Test Chamber is double walled and the interior chamber is insulated with 150 mm thick glass wool and puff insulation all around for limiting the radiation within the chamber only.   Construction Chamber : Double Wall Exterior Chamber : Made of 18swg CRC MS sheet with three coats of paint OR 18swg Stainless Steel Sheet 304 grade. Interior Chamber : Made of 18swg Stainless Steel Sheet 304 grade. Insulation : The Interior Chamber is insulated with 150 mm thick glass wool and Puff Insulation all around for ordering to limit radiation. Door : A full front opening door, double walled insulated and interior lined with Stainless Steel will be provided for ensuring full access to the working space inside the chamber. Gasket : Two gaskets, one on the chamber and the other one for leak proofing at the door, are fitted. Locking System : The door is also provided with heavy duty hinges & latches with toggle type locking arrangement. Portability : Trolley mounting with casters for easy portability. Air CirculationThe homogeneous condition of temperature inside the chamber maintaining by a forced blower with continuous duty rated TEFC motor for circulation. The conditioning space in the main chamber is baffled and heater and cooling coil is located in the conditioning space. The refrigeration unit is fitted under the chamber so as to ensure minimum space utilization.Heating SystemLow surface loading sealed tubular heaters conforming to IS-4159 provided to add heat in the chamber. The heaters are located in the conditioning space and there will not be any direct radiation of heat on the item under test.Humidity SystemLow-pressure moisture generator will be provided to generate moisture and add humidity in the chamber. The generator will be of minimum water level controller and mechanical float type refilling arrangement. Soft water will be used for the moisture generator.Refrigeration SystemTwo-stage air cooled cascade refrigeration system will be provided working on freon 22 and 13 as refrigerants with evaporative cooling attachment for working in high summer ambient condition. The system is fitted with HP/LP cut off switch, overload protector, backup fuse protection etc. Low RH condition is maintained by smooth tube evaporation coil dehumidification arrangement.InstrumentationsDual loop microprocessor programmer with direct RH display is provided to carry out steady state as well as cyclic damp heat test. Solid state relay proportional control for heaters is fitted.Control PanelControl Panel will be provided at the lower side of the Chamber, which will house Microprocessor Based Programmer with direct RH display with Printing Facility, On/Off Switches, Fuses, Contactors, Indicating Lamps etc.WiringAll the channel type wiring will be as per IS code.Utilities One Stainless Steel bar shelf with adjustable height arrangement will be provided. Window : 30 cm x 30 cm, 2 pane with low wattage heater and manually operated wiper. Chamber Drain. Chamber Interior Inspection Lamp. Safety protection Back up fuse protection for mains and individuals circuit. Over temperature safety cut off thermostat with audiovisual alarm. Overload protector for motor. HP/LP cut off switch for compressor. MCB for heaters. Minimum water level controller with mechanical float type refilling arrangement will be provided. Power Supply : 230/415 Volts ±5 %, Single/Three Phase AC power supply.

• Certification: ISO 9001:2008, CE Certified
• Application: temperature humidity vibration test
• Voltage: 380V
• Condition: New
• Power: 9-12kw
• Warranty: 1year
• Country of Origin: CHINA
• Type: programmable
• Color: blue+white
• Driven Type: electromagnetic type
• Weight: 1500
• Automatic Grade: Automatic
• Internal Dimension W*H*D (mm): 600*600*600mm
• Vibration Test Table Size: 300*300mm
• Frequency: 2000Hz
• Test Standard: Mil-Std-810-F
• Vibration Direction: 3 Axis
• Control Method: Programmable LCD Touch Screen
• Test Hole: Dia.50mm
• Temperature Range: -60

This chamber is capable of maintaining a temperature range from - 40 to + 100°C and controlled by the PID controller for better accuracy.

RESOTECH an ISO 9001: 2008 Certified Company, are a business organization, actively engaged in the manufacturing, supplying of Laboratory Instruments, Scientific Research and Laboratory Equipment’s. These laboratory equipment’s manufactured with efforts of our dedicated team of techno crafts, which is sincerely engaged in continual improvement of our range through consistent R & D. Further, we keep ourselves updated with the advanced technology and ensure to incorporate them in our lab instruments manufacturing process. Our know-how of modern techniques for various applications and functions involved in the process of manufacturing and quality testing keeps us ahead of our competitors. In pursuit of attaining excellence, the efforts of our company are directed towards incorporating the latest technological advancements and inputs, available at our end. Not only this, we do not leave any stone unturned towards ensuring the high degree of performance of these different scientific and laboratory instruments delivered by us

Environmental Test Chamber is also known as hot and cold impact testing machine, used to test or composite material structure, in an instant by the extremely high temperature and low temperature under continuous environment can endure degree.

We hold expertise in manufacturing and supplying and exporting a superior quality range of Environmental Chamber. M.K. Scientific Instruments Environmental Chamber specially designed for drying environment of plant and animal growth, determination of di-electric strength, proofness of packed materials, insulation testes of electrical components and many other tests requiring an atmosphere of controlled temperature & humidity. M.K. Scientific Instruments as an experienced manufacture in INDIA. Double walled Inner Body: Inner chamber made of Stainless steel. Outer Body: outer chamber develop using high grade mild steel with powder coated finish. This coating keeps safe the unit from rust and normal scratches. Insulation between inner & outer wall with polyurethane foam (PUF) to reduce running costs. Temperature Range: The temperature can be controlled from 10°C to 60°C ± 2°C and humidity 55% to 95% ±5%. Temperature Controller: The Temperature is totally microprocessor based P.I.D. or Digital Temperature Controller cum Indicator controlled for accurate temperature rating. Compressor: Hermetically Sealed Air Cooling Compressor (CFC Free). Air Circulation: Forced convection system through use of blowers & motors that provides for superior mixing as well as strong dispersion. Shelves: Stainless steel perforated/wire road shelves adjustable and sliding. Door: Door with synthetic rubber gasket & Door has a glass viewer window. Heater: Tubular U type air heater. Power: Power input to be 220-230 Volts AC, 50/60 Hz fitted with Indian plug.

• Power: 220V
• Material: Stainless Steel
• Phase: 1 Phase
• Speed of Test Frame ( RPM): 5-10
• Temperature Range: RT+10 to 200 Degree Celcius
• Frequency: 50-60 Hz

• Application: Laboratory
• Power: Electronic
• Country of Origin: Made in India
• Temperature Range: -70
• Material: SS
• Usage: Constant Temperature Humidity Environmental Test Chamber

Heavy Duty Robust Construction With Inner Chamber Made Of Stainless Steel And Outer Made Of M.s. Sheet Duly Enamel Painted. Glass Window Allows Inspection Of Samples Without Disturbing The Inner Chamber Temperature. Four Stainless Steel Adjustable Shelves Are Provided With The Unit. Air Circulation Fan Is Also Fitted To The Unit For Temperature Uniformity. Temperature is controlled by microprocessor PID Controller and its Range is from 10° C To 60° C±2° C and Humidity Is Controlled By Imported Humidistat from Ambient To 95% ±3% Rh. Arrangement Exists Only For Increasing The Humidity And Not For Decreasing. Fitted With Exterior Illumination Achieved By Flourescent Tube And 0-24 Gyclic Timer. To Work On 220/230 Volts Ac Supply. Inner Chamber.

• Voltage: 110V
• Application: Industrial Use
• Power: 1-3kw
• Driven Type: Electric
• Warranty: 1year
• Automation Grade: Semi Automatic

We are offering environmental chamber. Our Environmental Chamber is an all purpose humidity cabinet, confirms with international quality standards. The environmental chamber is used for drying environment of plant and animal growth, determination of di-electric strength, investigation of vapor roofness of packed materials, insulation tests of electrical components and many other tests that require control temperature and humidity. The environmental chamber, offered by us, has sturdy and elegant double-walled construction.   Construction The interior walls are made of heavy gauge stainless steel 304 grade and exterior is made up of heavy mild steel, finished in epoxy powder coating The door is of massi construction, having window and seals against atmospheric in filtration by resilli asbestos and rubber gasket The temperature can be controlled from 10oc to 60oc plus minus 2º c and humidity 55% to 95o% plus minus 5%, are controlled by an Automatic electronic controller with digital display of temperature and humidity Temperature below ambient is controlled by a hermetically sealed compress, complete with its all accessories provided at the bottom of the unit Two water tank, made up of stainless steel, have been provided in the cabinet The humidity inside the chamber is created by natural mist through a compressor and sprayer with 3 step voltage stability to work on 200/220 v. A.c. 50 hz

Small size climatic chamber Temperature range +5°C … +180°C Humidity range 10% … 98% Optional Extended Rh range Dew point humidity control World class metrology performance User friendly interior design State of the art repeatability User friendly interface

Roch Mechatronics Inc. introduce the innovated new technology ultrasonic humidifier system provides fast and accurate humidity re-productivity SS-304 inner chambers outer made of MS power coated.With 16 bit high speed 18MHz high precision microprocessor controler with self auto-tunning, timer, alarm function10 step 999 cycle programmable controller with LCD back light display and 16 bits.RS-232 computer interface with software pack can work with PC, data storage and setting value changeInner tempered glass door with silicone packing maintains stability and an easy sample view window magnetic doorTemperature stability with fast heat up and fast cool down to the setting value and excellent insulation Digital/Manual chambers are also avaliable on request.

We are offering Environmental Chamber, which are being widely used for conducting stability and shelf life studies on various drugs substances. Our Environmental Chamber is a trusted and preferred name among Laboratory Chambers that are majorly used for biological studies, mechanical components testing and in cement industries. Our Laboratory Chambers are specifically designed to match up with set international standards. Features Optimum performance Corrosion resistantLow power consumptionHighly durable

• Brand Name: Froilabo
• Power: 208/230V-50/60Hz-10A
• Temperature range: 0 DegreeC to +60 DegreeC
• Humidity Range Regulated: 5% HR to 95% HR

Specially designed double walled with internal chamber S.S.304 grade and outside mild steel sheet stoving painted and inbetween puf insulation is filled. Chamber providing controlled temperature from 10 degree to 60 degree +-0.2 degree & humidity from 40 % to 98 % +-2 %.Temperature & humidity is controlled by PID Digital Controller cum indicator & Displaying temp. & humidity in % age direct. Inside glass door & S.S. water tank is provided. SS tubing heater U shape take care of temp. above ambient & CFC free compressor with R134 a refrigerant maintains temp. below ambient. Humidity is created by means of steam.Built in Automatic voltage stabilizer to work on 230 volts AC. Available in All Sizes as per Demand