Filling Machine Dealers in Moti Nagar, Delhi

• Type: Automatic Washing Machine
• Certification: ISO 9001:2008
• Color: Brown, Grey, Light White, White
• Voltage: 110V, 220V, 380
• Condition: New, Used
• Automatic Grade: Automatic
• Power: 1-3kw, 3-6kw, 6-9kw
• Warranty: 1 Year, 2 Years
• Driven: Electric

We are a prominent Manufacturer, Exporter and Supplier of Carbonated Beverage Mixing Machine. The Mixomatic units are designed for the production of soft drinks containing Carbon Dioxide. In this process, water is deaerated (optional) under a high vacuum. Deaerated water and concentrated syrup is mixed (ready syrup) in a tank and the carbon dioxide is mixed homogeneously with ready syrup in a multi stage high pressure pump. Moreover, the Carbonated Beverage Mixing Machine is available in different specifications to meet the diverse requirements of the clients. Operating Procedure Degassing of Product WaterMixingCoolingCarbonationCIP Salient Features Direct Control of Brix rather than RatioThe Brix is directly controlled using mass flow meter for measurement, for any deviation in the set point & achieved point the syrup flow is controlled to achieve in terms of brix required. Controlled Injection of CO2 in terms of gm/litre. The Co, is injected in gms/litre. For any change in the flow rate of beverage the amount of CO, to be injected changes automatically. The change in line pressure of CO2 is compensated automatically, with in the set limit of CO, pressureDifferent CO2 pressure settings Injection pressure of CO, & buffer tank pressure can be set differentlyNo manifold & hand valves for different mode of operation. There is no requirement of any change over manifold & hand operated valves for running the machine indifferent modes. (like CIP, Discharge, Production). Once the mode of operation of machine is selected, the valve changes their position as per the mode requirementMan Machine interface: The top of end communication between operator & machine. Complete alarm history. Trends can be created & saved for production Additional Benefits Replacement hand operated flow control valve with electronic controlRemote operating Interface of the machine. The machine can be operated & controlled in full respect sitting in the office itselfCustomized recipe module with real time trendsReal time trends stored on hard disk for analysis purposeShift wise/day wise MIS reports for quantity produced, Mixer Usage, etc.

• white: white

Product Description: BELLEZA CAP RF ideal for: Smoothening of Wrinkles• Why is BELLEZA CAP RF preferred over other technologies? • Long-term effect.• A very pleasant experience, minimal discomfort to the user.• Safe and Easy to operate.• Low treatment cost.• Does not affect nerves or blood vessels.• Very quick Return on Investments.• Immediate visual effect. The Proionic Effect:The unique RF waveform generated by CAP RF optimizes the ionic exchange to balance the electric potential in the tissue. This stimulation preserves the physiology of the living tissue and improves the cells metabolism. The Thermal Effect:The CAP RF waves, due to polar molecule resonance, heat up the collagen tissue of dermis layer.o o When deep collagen tissue is heated up to 45 C -60 C, it shrinks naturally and immediately. This creates inter spaces within the collagen tissue, and as a result, the collagen tissue will be stimulated to excrete much more new collagen to fill in the inter-space. Thus, the collagen will be rearranged and the skin tissue is rebuilt. Finally, the user will enjoy successful skin tightening, wrinkle removal, improved skin elasticity and luster.The Sub-Dermal heating stimulates and heats the fat cells. This causes release of fatty acids from the fat cells. The process is known aslipolysis. It results in shrinkage of fat cells and smoothing of cellulite. Micro-circulation:The CAP RF also improves micro circulation and causes arteriosclerosis, What is CAP RF ?• It induces a Proionic effect.• The polar molecular resonance creates a Thermal effect• The deep penetration of RF energy also promotes Microcirculation and Hyper activation.The waveform has no effect on the skin. This makes the CAP RF treatment a very gentle & pleasant experience for the patient.CAP RF uses a unique Capacitive field technology with a lower frequency. It penetrates deep into the dermal & sub d

BELLEZA CAP RF ideal for: Smoothening of Wrinkles� Lipolysis� Bust lifting� Reshaping� Skin Firming� Improving Skin Tone� Skin Revitalizing Why is BELLEZA CAP RF preferred over other technologies? � Long-term effect.� A very pleasant experience, minimal discomfort to the user.� Safe and Easy to operate.� Low treatment cost.� Does not affect nerves or blood vessels.� Very quick Return on Investments.� Immediate visual effect. The Proionic Effect:The unique RF waveform generated by CAP RF optimizes the ionic exchange to balance the electric potential in the tissue. This stimulation preserves the physiology of the living tissue and improves the cells metabolism. The Thermal Effect:The CAP RF waves, due to polar molecule resonance, heat up the collagen tissue of dermis layer.o o When deep collagen tissue is heated up to 45 C -60 C, it shrinks naturally and immediately. This creates inter spaces within the collagen tissue, and as a result, the collagen tissue will be stimulated to excrete much more new collagen to fill in the inter-space. Thus, the collagen will be rearranged and the skin tissue is rebuilt. Finally, the user will enjoy successful skin tightening, wrinkle removal, improved skin elasticity and luster.The Sub-Dermal heating stimulates and heats the fat cells. This causes release of fatty acids from the fat cells. The process is known aslipolysis. It results in shrinkage of fat cells and smoothing of cellulite. Micro-circulation:The CAP RF also improves micro circulation and causes arteriosclerosis, What is CAP RF ?� It induces a Proionic effect.� The polar molecular resonance creates a Thermal effect� The deep penetration of RF energy also promotes Microcirculation and Hyper activation.The waveform has no effect on the skin. This makes the CAP RF treatment a very gentle & pleasant experience for the patient.

• Type: pressure manfold

INDICATIONS FOR USE Advantage II High pressure manifold is intended to be connected to various infusion channels to control the fluid or medication flow direction, also it can be connected to pressure monitoring system.   Features Large Internal Lumen (2.3mm diameter) Easy to rotation  Latex Free 

• sizes: 28 mm, 31.5 mm, 53 mm, 65 mm

When the requirement is to reuse the Cap after taking out the Contents in part pilfer proof Caps (PP Caps) are used. These Caps can be used to cover the bottle again after the contents are taken in part, but cannot be sealed with the same cap again. The machine is having a roller head and a pedestal. Cap is placed on the bottle and bottle is placed on the pedestal, height is adjusted as per size of bottle. By pressing the pedestal with foot the bottle is taken up to roller and by hand or machine, rollers are pressed and rotated to make spiral matching to the grooves on the neck of bottle. Caps cannot be removed without breaking the lower portion and only upper portion of the Cap is reused to only cover and not seal the bottle. Normal Cap sizes are 28 mm, 31.5 mm, 53 mm, 65 mm. Separate dies are provided to hold different Caps. The same machine can be used for Tin Plastic Caps and for different size of Caps. For more efficiency hand operation is replaced by ½ HP Motor of Standard make.The Machine is suitable for capping on any Glass or Pet Bottles. In Metal Caps this can do threading and capping in one operation whereas in pet bottles only screw capping is done. Any size of bottle can be adjusted on the machine. Cap Size from 20 mm to 60 mm can be fitted by changing the dies.

• Specialities: Power efficient, Remarkable built, High operational fluency

• Model: SPCL-40P, SPCL-40M
• Voltage (V/HZ): 220/60, 220/60
• Power (W): 0.37, 0.37
• Cap diameter(mm): 25 x40, 25 x40
• Applicable bottle height(mm): 50-320, 50-320
• Capacity (bottles /h): <1200,
• Type of cap: Plastic Cover, Metal Cover
• External dimensions: 650 x 200 x 920, 350 x 250 x 650
• Net weight (kg): 65

• Voltage: 220V
• Automatic Grade: Automatic
• Power: 1-3kw
• Driven Type: Electric
• Warranty: 3 Yr
• Features: Table Top

We manufacture Tea which is extensively in demand and sell it to our cherished clients. This product is broadly appreciated due the quality that it holds. Due to the best raw materials and the contemporary technology used, this product possesses the superior taste and aroma. The production of this product takes place under expert supervision. Due to all the positive traits it possesses, it is purchased by our customers in bulk quantity.

Bottle Cap Printing Machine As leading Pad Printing Machines & Fiber Laser Marking Machines manufacturer, with accessories like Printing Plates, Silicon Pads, Inks, Solvent. The production division is outfitted with advanced technology needed for smooth production process. Due to on-time delivery, ethical business policies, client centric approach, & reasonable Price structure,

Kuber Tea India's fast growing packaged tea brand that keeps the diverse preferences of its consumers in mind, offering an eclectic range of flavors and taste in its portfolio of tea products. Kuber Tea is special because it is specially sourced from the Upper Assam Gardens and made from the rarest and the best tea leaves of Assam. Our research team consists of trained and experienced botanists, who understand the care of tea plants, chemists who understand the characteristics of tea tasters, who select the best teas and design suitable blends, who devise and innovate the best technology. Our Tea Plant is fully automated.

• Type: Chilling Plants
• Certification: CE Certified, ISO Certified
• Type: DX Water Chiller
• Color: Black, Brown, Silver, White
• Voltage: 220V/380V, 230 Volt AC, 415, 415 V/ 3Ph, 50 Hz
• Driven Type: Electric
• Warranty: 1 Year, 5years
• Condition: New
• Warrenty: 1year, 2years
• Power Supply: 1-5kw, 10-15kw, 15-20kw, 5-10kw
• Weight (With Chilling Unit): 10-50kg, 100-150kg, 150-200kg, 200-250kg, 50-100kg

By embedding latest technology in the sought-after machinery for filling capsules, we are engrossed in bringing forth best-in-class Capsule Filling Machine. Our company, as the reliable Manufacturer, Exporter, and Supplier of Capsule Filling Machines in Delhi, India, is an ISO 9001:2001 certified establishment. We, thus, are offering each product in accordance with international standards of quality. Our Capsule Filling Machine is a semi-automatic machine that comes with a lever for operations. A versatile lever operated semiautomatic machine for various operations with levers is order of plates for putting of capsule by hand removal of caps filling of powder by dispensing of brush pressing fixing of caps and sealing Injection of capsules. Contact parts of stainless for 100 capsules of size 0 to 2 or 5 (anyone size in order). -do- capacity of 300 capsules at time.

model : atlantis cafe miniCannister capacity : 2 nos. of 1 kg capacity eachNumber of options : 2 laneStart up time : 15 mins Dispensing speed : 3 cups/minNet weight : 14 kgPower : 1600 wattsVoltage : 220v / 50hzDimensions (in mm) : 330 (w) x 330 (d) x 650 (h) Features Magnetic Sealing Door Compact & light weight Double Option Hot Beverage Vendor Microprocessor controlled Adjustable premix & Water quantities ABS Injected Top & Door Water Level Sensor Half cup & Hot water dispensing Cup Counter Stainless Steel Water Tanks    

We offer feature packed Semi Automatic Jar Filling Machine that is equipped with the latest features. We make available precision engineered Semi Automatic Jar Filling Machine that is known for its user friendly operations. Semi Automatic Jar Filling Machine, that we offer, is fabricated with the highest level of perfection, using top grade components. Our Semi Automatic Jar Filling Machine Is : High performanceCorrosion resistantCost effectiveRobust constructed