Floor Cleaning Machine Dealers in Naraina, Delhi

Mini Polisher is the only machine available in the world which is specially designed to grind, polish, maintain etc. marble, mosaic, stone and slate treads, platforms, landings etc. Its 1hp heavy-duty motor meets the most demanding requirements of any of the above operations.   Your machine is powered by a 1hp, mono-phase motor, 220V, 1440rpm. Three mini v-belts drive the spindle which is mounted in heavy-duty taper roller bearings to ensure smooth running and long life. The spindle is coupled to the abrasive plate by means of a rubber coupling. The rear wheel assembly is connected to the frame of the machine over a raise-lower device. This enables the operator to balance the machine exactly. You may take your hands off a running machine and it will not wander away but stay where it is. This feature coupled with the front handle control gives excellent control over the operation being performed. The machine has adequate self-weight for all grinding, polishing and buffing applications. The operator need not apply any pressure manually. A spring stand is provided to allow easy and convenient change of abrasives and polishing plates. The electrical cable can be conveniently wrapped onto the cable holder. Central water feeding through the shaft brings the water required for grinding exactly to the right place. The water guard prevents splashing of the entire polishing area.   Your machine is provide with one abrasive plate capable of holding three Butterfly (Munich) / three Casani / three Triangle abrasives. The abrasive plates are easily interchangeable. One spare plain plate may be kept for any eventuality.   Your machine attains its steadiest performance when the wheel side of the machine frame is kept about 25 to 35mm lower than the handle side. Generally, if the machine pulls to the left you are advised to lower the rear of the machine frame. In case the machine pulls backward you are advised to raise the rear of the machine frame.

• Certification: ISO 9001:2008
• Application: Industrial
• Weight: 100-1000kg
• Warranty: 1 year
• Condition: Used
• Type: Horizontal

We are engaged in offering heavy-duty Used Horizontal Floor Boring Machine. Matching with the international standards, our Used Horizontal Floor Boring Machine performs just like a new one. Loaded with advanced features, our Used Horizontal Floor Boring Machine is highly easy to operate and assures optimum functionality. With such attributes, the cost-effectiveness of the Used Horizontal Floor Boring Machine acts as an add-on to the clients.

• Power: 550W
• Voltage: 220V
• Weight: 138Kg
• Cable: 10M
• Lead Time: 3-7 days
• Speed: 154rpm
• Port: Any Port
• Diameter: 12"

A cleaning machine without any motor. The operator's hand-push gives motion to the wheels which drive the main and side brush. This is a very simple and practical sweeper, especially suitable for cleaning small areas and narrow passages. Exclusive design with filtration for exhaust air.

• Fuel: Electric
• Weight: 25 Kg
• Type: Floor Cleaning Machine
• Condition: New
• Port: Any Port
• Packed Weight: 32 Kg
• Dimension(L*W*H): 460X790X760mm
• Place of Origin: Delhi, India
• Cleaning width: 700mm
• Model Number: Sweeper
• Power(W): 1500 m2/h

• Type: GENERAL PURPOSE CLEANER
• Brand Name: Klik Magic

general purpose cleaner: km 2 has formulated for cleaning all types of surface where effective cleaning and disinfection is needed. Suitable for use on kitchen work surface, food preparation surface, sinks, ceramic tiles and surface made from porcelain and enamel.

• PACK SIZE: 5 Ltr.

Q1 is extra Heavy Duty Floor Stripper for toughest buildups. Formulated to excel with superior wetting penetration & emulsification properties. This is the first step to achieve best results. On application it removes old polishes, dirt and grime even from the pores of floors. Q1 is a non-toxic and non-acidic stripper which leaves the floor absolutely dirt-free, thus the floor is prepared for the floor the application of the polish.

Portable table top model having one piece fiber glass molded top with built-in drain pot and sink area and fitted with neck tap. The drive os of a 14 HP single phase 220 volts A.C.T.E.F.C. motor, employing a continuous variable speed mechanism giving speed from 400 to 1100 RPM (approximately). The bronze disc of 8" dia. push fits on a tapered steel spindle. The spindle runs freely in two ball bearing fitted in the housing. The change of speed is make with the help of a circular control wheel. The machine is supplied with splash guardhand rest. Disc cover and a spindle for fixing cloths.

• Motor Capacity: ½ Hp
• Disc Diameter: 8 inch
• RPM: 900 Fixed
• Start: On / Off
• Supply: 15 Amps, 230V, Single phase

Floor Polishing Machine, Marble Cutting Machine

Floor Cleaner, Dish Wash Liquid, Hand Wash Liquid Soap, Toilet Cleaner

Floor Scrubber, Automatic Vacuum Cleaner, Scrubber

Floor Cleaner, Air Freshener, Concentrated Floor Cleaner, Fabric Whitener

Central Vacuum Cleaning Systems, Glass Cleaning Kit, telescopic rod

Bobcats Sweeper

Floor cleaning machine

Heavy Duty Floor Stripper, Laundry QNX Series