Food Processing Machinery Dealers in Bawana, Delhi

YPM Starch Paste Kettle GMP Model will be made out of S.S. 304 Rectangular Pipes and will be an independent resting type frame work where no foundation will be required. The Kettle will be a hemispherical type bowl with either steam / Oil / Water heating Jacket will be provided. The Kettle will be manufactured from 2.5 mm thick S.S. 304 Sheet and The Jacket will be of 2.5 mm Mild Steel (In case of steam Jacket the thickness will be 4 mm) There will be oil / water heated fitted at the back bottom side of the Kettle. The Kettle having a worm type arrangement for tilting. A temperature controller & a temp Indicator will be provided for temp control & Indication. The Kettle will be Insulated with 50 MM thick glass wool Insulation & Cladded with 16 SWG S.S. 304 Sheet. Starch Paste Kettle will be buffed to 150 grit matt finishes externally and Internally the Kettle will be buffed to 220 grit mirror finish.   Functions : Basically YPM Starch Paste Kettle is used for preparation of Starch Paste. Hemispherical shape ensures that the Heating of the Starch Paste is Uniform & gets more Surface area. The tilting type arrangement Ensures ease in unloading the Paste into any container or vessel. The Starch Is put in the kettle and water is added till desired thickness is achieved. The Kettle is jacketed & is heated till the Starch Melts an Thick Paste is achieved. This Paste can be agitated either manually or with The Help of an Anchor Type agitator which will constantly stir. The Paste so that there will no lumps formation and proper mixing is achieved. Temperature can be set to desired temp by adjusting the thermostat provided.   Optional Available : Starch Paste Kettle is built in stirrer arrangement with lifting & lowering device Our Starch Paste Kettle is equipped with Steam fittings with all connections factory fitted Non Tilting type with bottom discharge models is also available.   Capacities Available : Our Starch Paste Kettle is available From 50 Liters to 1500 Liters Capacity. We Also Manufacturer Capacity 3000 Liters & Above. Needless to say, it also provides the benefits of the effective manpower utilization.

• Application: Mixing
• Weight: 100- 3000 Kg.
• Country of Origin: Made in India
• Material: Mayonnaise
• Machine Power: 10 HP to 100 Hp.
• Capacity: 200 Liters to 4000 Liters per batch.

• Capacity: 10 CFM to 1000 CFM
• Weight: 150Kg
• Material: MS
• Brand Name: Compet
• Drying Capacity (in cfm): >1000 cfm, 21 - 50 cfm, 121 - 500 cfm, 51 - 120 cfm, 501 - 1000 cfm
• Minimum Output Dew Point (in C): -30 C, -20 C
• Dryer Horse Power (HP): 2 HP, 10 HP, 20 HP, 1 HP, 5 HP, 15 HP
• Frequecy: 50-60 Hz
• Finish: Color Coated

• Manual Feed PCB lead cutting machine: TM-911
• 220V AC 60hz/50hz: L800 x W350 x H680 mm
• 75kg: 4500tum/min

The eagle claw shrapnel clamp can nip PC board tightly and push them forward automatically and stably The crest pinpricks ball and the Bakelite press plank can reduce the error of Lead-cutting of PC boards transformed during the tin soldering. The track board-delivery speed can be adjusted according to pins in to increase the service life of the cutter. The largest PCB board size, Length 500mm x 250 mm

• Brand Name: UB Projects
• Condition: New, Good
• Place of Origin: Delhi  
• Variety: Dough Extruder, Extrusion Machine, Extrusion Machinery, Food Processing Machines, Screw Extrusion etc.
• Unit: Manufacturing

We manufacture Kurkure Extruder, Corn Fried Extruder, Dough Extruder, Extrusion Machine, Extrusion Machinery, Food Processing Machines, Screw Extrusion, Food Processing Equipment, Kurkure Machine Manufacturer, Extruder Machine, Food Processing Machines manufacturers, food machine, Snacks Extruder, Corn Puff Snack Extruder, Cheese Balls Puff Extruder, puff snack extruder, puff food extruder, corn curls extruder, inflating corn snack extruder, Screw shape corn puff extruder, corn extruder machine, snacks extruder, corn flour snack extruder machine, small snacks extruder, maize extruder, extruders cheese snacks, pasta extruder, food extruder, puffed rice extruder, puff food extruder, rice snacks extruder, rice vermicelli extruder, rice crispy extruder, etc at industry competitive prices.

• Country of Origin: India
• Weight: 100-1000kg
• Voltage: 220V
• Automatic Grade: Automatic, Fully Automatic
• Power: 1-3kw, 3-6kw
• Driven Type: Electric

We are one of the leading Manufacturers & Suppliers of Refrigerated Air Dryers. The Refrigerated Air Dryers are fabricated by our engineers using cutting-edge technology and superior quality parts and components. The Refrigerated Air Dryers supplied by are robustly constructed, sturdy, efficient and durable. Clients can avail quality tested and highly functional Refrigerated Air Dryers from us at competitive prices. Construction & Working : The basic principal of operation of the Refrigerated Air Dryer is the removal of moisture by cooling air to certain preset temperature. The air entering the system enters into the precooler. A Precooler is a heat exchanger where the incoming hot air is being cooled by the outgoing cold air so as to reduce the heat loads for the evaporator and thereby the refrigeration system. When the air is cooled, i.e., when the heat is removed from the air, the water vapour will get condensed. It is easy to remove the moisture as a condensate than the moisture in water vapour state. The air from the precooler enters into the Evaporator. In evaporator the cooling, heat removal is done by the boiling refrigerant requires heat to boil. This heat is evolved from the air. Air is cooled to 2 o 4 c. When the temperature drops, the moisture turns to condensate moisture is a form of water. The air with condensate enters into moisture separator where the moisture is removed with the help of auto drain centrifugal action of air during the centrifugal passage of air, moisture being the denser medium. The refrigerant circuit consists of a compressor, a condenser, a filter dryer, expansion valve or a capillary tube and an evaporator. The low temperature refrigerant vapour enters the compressor. Compressor rises the pressure of the refrigerant. Also the temp of ref. gas. The hot, high-pressure refrigerant enters into the condenser. In the condenser, heat is removed from the refrigerant by circulating cold air using the Fan. The low temperature, high-pressure liquid enters the filter dryer, where the dirt contents are removed. The refrigerant, then passed into the expansion valve, The temperature of the refrigerant leaving the expansion valve will be – 1 C, This low-pressure liquid refrigerant enters the evaporator. In the evaporator, the refrigerant boils and becomes low-pressure vapour. The Vapour enters the compressor and the cycle continues.

Features : 350 watts motor30 minutes rating2 Stainless Steel JarsOverload protection for motor3 Speed function control with incher facilityRPM 16000.

• Machine Capacity: 5kgs to 2000 kgs
• Type of Waste: Food waste disposer
• Grade: Fully-Automatic
• Power Consumption: 1 kw to 10 kw
• Space Requirement: 200 sq feet to 1200 sq feet

• Power: 20 Watt (w)
• Warranty: 1 Year
• Feature: ECO Friendly Low Noice Lower Energy Consumption Compact Structure High Efficiency
• Control System: Manual

Our company specializes in providing ready-to-eat plant machine and plant setup services. We offer comprehensive solutions to help you establish a fully functional ready-to-eat food production facility. Our team of experts will work closely with you to understand your specific requirements and design a customized plant layout that maximizes efficiency and productivity. We provide assistance in selecting the right machinery and equipment for your ready-to-eat food processing needs, considering factors such as production capacity, food safety standards, and quality control. Once the design and equipment selection are finalized, our experienced technicians will handle the installation and commissioning process. They will ensure that all machines are properly set up, calibrated, and integrated into the production line for seamless operation. Additionally, we provide training programs for your staff to ensure they are well-versed in operating and maintaining the machinery effectively. Our aim is to empower your team with the knowledge and skills necessary to run the ready-to-eat plant efficiently. Throughout the entire process, we prioritize adherence to food safety regulations and industry standards. Our solutions are designed to meet the highest quality and hygiene requirements, ensuring that your ready-to-eat products are safe and comply with all relevant regulations. By choosing our ready-to-eat plant machine and plant setup services, you can benefit from our expertise and streamlined approach. We are committed to delivering a turnkey solution that enables you to establish a successful and profitable ready-to-eat food production facility.

We deliver a wide range of stick puff machine that are used as kurkure extruder that come with features like vibratory feeder, fryer, de-oiling & flavoring.

• Brand Name: KDM

cold feed extruders, Rubber Kneader, Hot Feed Rubber Extruder

floating fish feed pallet machine, feed extruder plant, fish feed mill

Mixer, Pressure Cooker

Mixer, Cattle, Gas Stove, Press, Pressure Cooker, Toaster

Freeze Dryers, Ultra Low Freezers, analyzers, Centrifuges

Mixer, Hopper Dryer, waste grinder, Die Head for pvc pipe plant

Steam Jacketed Kettles, jeans pents, plan shirts, Jeans, Shirts

Canning Retort, Hook Loader, Vacuum Loader De Silting Machine

freeze drying equipment, urine test

Soya Nuggets Extruder, Fully Foldable Trolley, Sand Mill, Wall Putty Machine

Food Processing Machinery, Consultancy Services

Food Processing Machinery, Food Processing Machine, Juice machine

Lyophilizer Freeze Drier, Condenser, Air Conditioning Equipment

Pulverizers, mercury analyzers, Ring Mill, Ozone Test Chamber

Mixer, Home Textile, Kitchen Ware, Table, Furniture, Jewelery

Honey Processing Plants, palm oil mill