Footwear Testing Equipment Dealers in Delhi

• Number of specimen test: 2 for full sole, 6 for ut test specimen
• Angle of flexing: 90
• Diameter of bending mandrel: 30 mm
• Frequency of operation: 125 to 150 cycles/minute.
• Motor: ½ HP, Single- Phase 230 volts AC
• Counter: Six digit pre set counter

MYQ Bennewart Flex Tester To determine the resistance of a component of material to cut growth during repeated flexing, it can also be used to access the effect of surface patterns on crack initiation and growth. The particular test is applicable to out sole of the footwear but may also be used with certain other flexible components.   The test can also be used for understanding effect of surface patterns of crack and substance growth upon repeated flexing. The test is specially preferred for out soles of footwear.   Features -: Equipment made from M.S. Structure duly epoxy or automotive paint. Tester drive with motorized with pully. Equipments base also made from rigid plate finish with automated paint and bright chrome plated.   Related Standard-: DIN 53543-1979 : Testing of rigid polyurethane (PUR) Integral cellular Material for soles and parts of shoes. SATRA PM 161 : Benne warts flex tester Resistance to cut on flexing IS 15298 (part1)-2002 : Safety Protective and Occupational footwear for professional use ISO 17707, ISO 8782 (PART1) : Professional use part1: Requirement and test method -1998

We also manufacture and supply a wide range of Footwear Testing Equipment’s which is extensively used in various footwear industries to test the quality of the leather and footwear. These are available in different dimensions and specifications that meet the individual requirement of our clients in the best possible manner. Furthermore, our range is well known for the quality and longer service life features. We offer these at competitive prices.

The strength of adhesion of a sole to its upper is determined by measuring the force needed to pull off the sole from the upper. A suitable last is placed inside the shoe, which is then placed on a straight edge acting as a fulcrum for applying load on the joint of the sole and upper. The maximum load the sole can withstand before coming off is determined and reported as the sole adhesion strength. This test can be carried out either at the heel or at the toe of the shoe.

• Warranty: 12 Months
• Material: Stainless Steel
• Application: Textile Testing Instrument
• Power: Electronic
• Unit dimensions:: 150 x 200 x 65mm
• Strap Material: Polyester
• Feature: Durable, High Quality, Adjustable

• Frequency: 9 Volt Battery
• Brand Name: Blue Sky
• Features: It can be wall mounted outside the ESD protected area by using the Instruction board. Foot wears can be tested by connecting the Foot Plate
• Application Areas: Diagnostic centers, Municipal hospitals, Primary health centers, Surgical treatment centers
• Voltage: Wrist strap 0.75 to 10 Meg ohms Foot Wear 0.75 to 100 Meg ohms
• Model Name/Number: WSFT - 01
• Dimensions: 135 x 70 x 25 mm
• Weight: App. 150 Gms
• Power supply: 9 Volt
• Accuracy: +/- 10%

• Type: Demattia Flex Tester
• Color: Blue and Grey
• Condition: New
• Country of Origin: India

De-Mattia Flex Tester has 6 set of grips to hold test specimens (3 each in two tiers) with their holding faces lying in the same vertical plane. Holding one end of the test specimen in a fixed grip and the other end in a reciprocating grip provides the flexing and unflexing action. Paramount Demattia - Upper Flex Tester i 9™ is an ergonomically designed Equipment with sturdy mechanism to get Accurate & Reliable Results. It is used for the Assessment of flex crack resistance- Assess the overall appearance, considering all visible factors such as wrinkling, cracking, flaking and discoloration

Our company is one of the reputed Manufacturer, Exporter and Supplier of the Demattia Flex Tester. We provide high-quality Demattia Flex Testers and they are one of the major Leather and Rubber Testing Equipments. Some of the Specifications for the Demattia Flex Tester are as follows: Specifications B.S 903 Pan A 10 - Resistance to Flex Cracking Method AB S 903 Part-A 11 - Resistance to Cut GrowthB S. 2601-3 Appendix H - Resistance to flex cracking Method 1A.S.T.430 -D 813- 1.5 O.R, 133I.S.3400 Part (VII & VII) T967

• Dimensions: 135 x 70 x 25 mm (LxWxH)
• Foot Wear: 0.75 to 100 megaohm
• Range Selection: By Slide Switch
• Indications: Pass – Green LED
• Low & High Fail: Red LED (With Alarm)
• Test Actuation: By Pressing Metal Sensor Plate
• Accuracy: +/-10%
• Power Supply: 9 V Battery
• Battery Status: By Dual Color LED
• Weight: Approx 150 g with Battery
• Calibration: Recommended every 12 months
• Optional: Instruction Board, Foot Plate, Carry Case
• Consist of: Wrist strap tester, Yellow Wall Station, Foot Plate

• Features: Long service life, Immaculate finish, Simple design, Attractive functionality, Super performance, High strength

Supported by a team of skilled and experienced professionals, we have been capable of offering efficient Sole Adhesion Testers. Under the strict supervision of our expert professionals, these instruments are manufactured using finest grade raw material in compliance with industry defined standards. Moreover, the product undergone under these services are stringently checked prior to their dispatch so as to ensure delivery of only high grade range.Attributes: Excellent sole adhesion test results Available in digital model Corrosion resistant and durable finish

• Dimensions: 135 x 70 x 25 mm (LxWxH)
• Foot Wear: 0.75 to 100 megaohm
• Range Selection: By Slide Switch
• Indications: Pass – Green LED
• Low & High Fail: Red LED (With Alarm)
• Test Actuation: By Pressing Metal Sensor Plate
• Accuracy: +/-10%
• Power Supply: 9 V Battery
• Battery Status: By Dual Color LED
• Weight: Approx 150 g with Battery
• Calibration: Recommended every 12 months
• Optional: Instruction Board, Foot Plate, Carry Case
• Consist of: Wrist strap tester, Yellow Wall Station, Foot Plate

• Dimensions: 135 x 70 x 25 mm (LxWxH)
• Foot Wear: 0.75 to 100 megaohm
• Range Selection: By Slide Switch
• Indications: Pass – Green LED
• Low & High Fail: Red LED (With Alarm)
• Test Actuation: By Pressing Metal Sensor Plate
• Accuracy: +/-10%
• Power Supply: 9 V Battery
• Battery Status: By Dual Color LED
• Weight: Approx 150 g with Battery
• Calibration: Recommended every 12 months
• Optional: Instruction Board, Foot Plate, Carry Case
• Consist of: Wrist strap tester, Yellow Wall Station, Foot Plate

• Related Standard:: IS

Used to Evaluate the adhesion strength of sole at the toe and heel. • Load Range 0-100 kg x 500g • Curvatures of toe-pieces 25,30,35, 40 and 45mm • Length of contact arc 22mm

• Brand Name: Ramp Impex Private Limited
• Country of Origin: Made in India
• Application: Industrial
• Model Name/Number: Leather Softness Tester
• Use: Leather and Footwear Testing
• Standards Satisfied: IULTCS.IUP/36, ISO 17235

Combo Wrist Strap Footwear Tester, Finger Cots, Smoke Absorber

Sole Adhesion Tester, Shear Fatigue Tester

Esd Test Equipment, Esd-testing Instruments, esd flooring, Esd Chair

Esd Test Equipment, digital torque meter, Microwave Test Bench

Bennewart Flex Tester, Humidifier, Dehumidifier, Karl Fischer Titrator

Wrist Strap & Foot Wear Tester, Tuff Bins, Esd Chair, ultra sonic cleaner