Fume Hood Dealers in Kamla Nagar, Delhi

Laboratory Fume Hoods are one of the most important components used to protect laboratory personnel from exposure to hazardous chemicals and agents used in the laboratory. When used properly, they can provide an effective backup safety device for the containment and exhaust of toxic, offensive or flammable materials when the containment of an experiment or procedure fails and vapors or dust escape from the apparatus being used. We are one of the foremost Chemical Fume Hood Manufacturers and Stainless Steel Fume Hood Suppliers. The Cabinet is made of thick ply board & reinforced with teak wood whatever necessary interiors coated with asbestos sheets, coated with epoxy paint or convert FRP lining as per requirements. Working table is covered with glazed ceramic tiles and provided with necessary water inlet & outlets with sink (stainless steel/prosaleen). Provision of water inlet/outlet, sink will be on request only. Front door is made of 6mm clear glass in laminated teakwood frame and connected with a counter weight balance through a iron rope. The door will have the provision of vertical sliding facility. Exhaust blower consists of single phase motor, directly connected with a PVC Exhaust blower consists of single phase motor, directly connected with a PVC impeller and enclosed in a epoxy coated MS casing. The rating, speed & capacity of the Blower sill are designed on the basis of the SIZE & VOLUME of the FUME HOOD. However the suction velocity of the FUME HOOD will be around 100 cfm per square feet. The exhaust assembly can be of build-in-type or external mount type. The blower assembly will directly be connected with suitable exhaust ducting, which is made of PVC pipes with suitable bend & joints and rain guard.   Chemical & Fire resistant Phenolic(FRP) Resin Lining inside the Chamber Different choice of worktops suitable for a wide range of applications (S.S/ GRANITE/TILES) Clear tempered safety glass sash utilizes counter weights for smooth and effortless operations Options : Compact Ductwork System with Exhaust Fan Fume Scrubber Wash-Down System Electrical Wiring Solvent Storage Base Cabinet Acid Storage Base Cabinet Fire Proof Tiles

Air Flow Monitor to indicate the face velocity of Air-Flow with primary purpose of warning when a low flow condition occurs, Red & Green LEDS corresponds to Low & Normal flow respectively. Even when flow decreases from Normal to low, an audible alarm will also actuate requiring manual acknowledgement for silence. Digital Display shows velocity in FPM or Meter/Sec. P.P. interior lining for base storage cabinet (for drawer section only) Exhaust Ducting of Rigid PVC The Ducting will be fabricated out of 3mm thk PP Sheets & the same will be externally coated with 1.5 mm Thk FRP using Isopthalic grade resin (Suitable for Highly Corrosive atmosphere) a long with 450 gm/cc Chopped strande mate. All the required place. Ducting will be charged as per actual quantity use on site after taking joint measurement with your & our person. Size : 8" Size : 10" Chemical & heat resistance PP+FRP blower instead of epoxy coated blowerRemote Mounting Kit Weather proof rain cowl (Blower to be mounted on the exterior) (Mounting to customers scope as it involves masonary work and angle grouting, alongwith skilled labour required for ducting, clipping and mounting of fume duct upto the remote mount kit). Temperature Indicator for upto temp. range of 1500C with RTD sensor (PT-100)

Obromax fume hood are to limit a person's exposure to hazardous andor unpleasant fumes. For worker protection, the laboratory fume hood is the most useful piece of safety equipment found in the lab. When used appropriately, fume hoods not only provide protection from toxic gases and vapors but also provide protection from unanticipated fires and explosions. Fabricated out of thick wooden board these are designed . Outer is finished with sunmica and inner epoxy painted. Working table top is fitted with acidalkali resistant tiles stainless steel and a small wash basin with connections provided for inlet and out let of water. The front door moves vertically up and down with concealed counter balanced weight. The unit if fitted with flourescent light and a gas cock for gasair supply. The space under the work station can be provided with storage compartments for storage purpose. The front facing panel is fitted with 155 amp socket with switches for exhaust system and fluorescent light. To work on 220230 volts a.c. Supply. Working size- 2’x2’x2’ 3’x2’x2’ 4’x2’x2’ 6’x2’x2’

• Model: Working Sizes
• AGFH-322: 3' X 2' X 2'
• AGFH-422: 4' X 2' X 2'
• AGFH-622: 6' X 2' X 2'
• AGFH-532: 5' X 3' X 2'

features: fabricated out of thick wooden board. these are designed so as to throw-out all toxic/harmful vapors, thus protecting costly instruments and the person working in the lab. outer is finished with sunmica and inner epoxy painted. working table top is made of stainless steel and a small wash basin with connections provided for inlet and outlet of water. the front door moves vertically up and down with concealed counter balanced weight. the unit is fitted with fluorescent light and a gas cock for gas/air supply. the front facing panel is fitted with 15/5 amp socket with switches for exhaust system and fluorescent light. to work on 220 / 230 volts a.c. Supply.   optional accessories: fc mounting base with storage space and door.   working table top with(ss.316) in lieu of ss 304 grade lead lining on work walls for use as radio-isotope fume hood fume duct per running feet. 

Kjeldahl Distillation Unit, de humidifier, Deep Freezer