Fume Hood Dealers in Delhi

• Material: Epoxy Coated Aluminium
• Brand Name: Saiclave
• Frequency: 50-60 Hz
• Usage: Laboratory
• Voltage: 115 V
• Weight: 55.38 kg
• Automation Type: Automatic
• Flow Rate: 310 cfm
• Liner Material: Fiberglass

We bring forth optimum quality Laboratory Fume Hood for the esteemed clients. The Laboratory Fume Hoods manufactured by us are designed with extreme precision using quality methods that make it suitable for use in various laboratories and research units of industries, institution etc. Our Laboratory Fume Hoods are non-conductor of heat and are chemical and corrosion resistant. The clients can avail our energy efficient Laboratory Fume Hood at very economical price. Made Of Wooden board laminatedMild steelStainless steelTiled work station, reinforced fibre Technical Specifications Sliding sash doorWash basinExhaust systemWork on 220V AC Size 600x 900x 1200 mm

We are recognized as one of the reputable Manufacturers, Exporters and Suppliers of Fume Hood in Delhi, India. High-grade metal is used in the manufacturing of the Fume Hood ensuring high durability, tensile strength and resistivity to adverse conditions. We stock the Fume Hood in the spacious warehouse to address the bulk requirement of buyers easily. More about Fume Hood : A fume hood or fume cupboard is a type of local ventilation device that is designed to limit exposure to hazardous or toxic fumes, vapors or dusts. In the fume hood air is drawn in from the front (open) side of the cabinet, and either expelled outside the building or made safe through filtration and fed back into the room.   Purposes : To protect the user from inhaling toxic gases (fume hoods, biosafety cabinets, glove boxes); To protect the product or experiment (biosafety cabinets, glove boxes); To protect the environment (recirculation fume hoods, certain biosafety cabinets, and any other type when fitted with appropriate filters in the exhaust airstreams). Features : Highly recommended for exhaust of toxic gases, acidic/alkaline fumes, chemical vapors, removable of odour etc from the hood working area. Very useful for products and personal protection, reducing odour levels in laboratories and protect costly lab equipments. Complete exhaust motor blower assembly generated a negative pressure inside the hood thus facilitating removal of all contaminants from the works area, into the atmosphere.  Main cabinet/body is fabricated out of Mild Steel from outside & S.S 304 grade inside. Work table is made of Mild Steel and is fitted with a small S.S. sink with water tap connections. The front door moves vertically up and down with concealed counter balanced weight. The unit is fitted with fluorescent light and a gas cock for gas/air supply. The front facing panel is fitted with 15/5 Amp socket with switched for exhaust system and fluorescent light. To work on 220 / 230 volts A.C. Supply.

• Frequency: 240 Volts
• Packaging Type: Wooden Box
• Application: Clean Room
• Brand Name: REW
• Material: Metal
• Finishing: Non Polished
• Shape: Rectangular
• Color: White
• Condition: New
• Application: Laboratory Use
• Size: 6ft
• Certification: ISO 9001:2008
• Type: Fume Hood
• Country of Origin: India
• Height: 5ft, 6ft
• Approx. Price: Platform Size

The fume hood is an important safety device in any laboratory. Fume Hoods are recommended for exhaust from the hood working area, of gases, vapour, toxic particles, odour to improve working environment of people who regularly handle toxic substances. These reduce personal exposures and odour level in the laboratory. These are designed to exhaust toxic or otherwise harmful vapours etc., for protecting laboratory personnel & equipments. A motor-blower exhaust system generates negative pressure within the hood, extracting the contaminated air from the work area and expelling it into the atmosphere and preventing the fumes from escaping into the room. These are recommended for various laboratories like Bio-Chemistry, Pharmaceutical units, printed circuit etching/cleaning etc. These are capable of handling corrosive fumes of sulphuric and hydrochloric acids etc. If work-area walls are lead-lined (Optional), it can be effectively used for Radio-Isotopic applications. Construction The main body of the fume hood is made of Mild Steel. The working table top is of stainless steel sheet. A small S.S. Sink, water tap and connections for inlet and outlet of water are a standard feature. A sliding door made of acrylic, moves vertically up/down with counter balanced weight operated by steel rope. The unit is fitted with fluorescent light & a gas cock for gas/air supply. Two/Three drawers & storage compartments are provided under the working table. The front facing panel is fitted with 15/5 Amp. socket with switches for exhaust system and fluorescent tubes.    Motor & Blower Assembly An exhaust centrifugal fan of 0.75 HP, 1440 RPM (Crompton) is installed at the top to throw out the toxic fumes.    Working Table Size 4' × 2.5' × 2' 6' x 2.5' x 2' 5' x 3' x 2'Other sizes can be manufactured as per Lab Design    Power Requirement The instrument is able to work on 220V AC Supply    Optional Accessories PVC Fume Duct (Per Running Ft.) Teflon Lining on the work bench (Per Sq. Ft.) FRP Lining on inner walls (Per Sq. Ft.)   Working table top fitted with acid/alkali resistant tiles/FRP lining

• Size: 4ft, 5ft, 6ft
• Material: Metal
• Shape: Rectangular, Square
• Certification: ISO 9001:2008
• Application: Laboratory Use
• Finishing: Polished
• Country of Origin: India
• Height: 5ft, 6ft, 7ft
• Approx. Price: Air Volume

fabricated thick mild steel/stainless steel duly powder coated painted. Working table top is fitted with black granite and three side wall fitted with highlem sheet (acid proof) a small wash basin with connections provided for inlet and outlet of water. The front door moves vertically up and down with concealed counter balanced weight. The unit if fitted with fluorescent light and a gas and water tap supply. The space under the work station can be provided with storage compartments for storage purpose. The front facing panel is fitted with 15/5 amp socket with switches for exhaust system and fluorescent light. To work on 220/230 volts a. C. Supply.

• Size: 5ft
• Type: Fume Hood
• Material: Metal
• Shape: Rectangular
• Certification: ISO 9001:2008
• Application: Laboratory Use
• Color: White
• Condition: New
• Finishing: Polished
• Height: 7ft
• Approx. Price: Air Volume
• Country of Origin: India
• Color: White
• Color: Blue
• Blue: White

• FEATURES & BENEFITS: Color touch screen display & graphics, No duct and wall penetrations required, Energy efficient working, Rugged construction .
• Controller: Color touch screen display, Graphical details for easy operation, Password protected operation, Various safety alarms , Filter choke alarm .
• Construction: Epoxy coated galvanized steel
• Workstation: Epoxy resin board
• Sash: Acrylic sash
• Illumination: Fluorescent Tube light
• Choice of Filters: HEPA filter, Carbon filter, Ammonia filter, Formaldehyde filter .
• Optional: Stainless steel work station, Chemical storage cabinet .
• Power supply: 220 Volts 50Hz

• Size: 4ft
• Type: Fume Hood
• Material: Metal, Stainless Steel
• Shape: Rectangular, Square
• Certification: Yes
• Application: Laboratory Use
• Color: White
• Condition: New
• Finishing: Non Polished, Polished
• Height: 5ft
• Approx. Price: Air Volume

• Country of Origin: India
• Size: 4ft
• Type: Fume Hood
• Material: Stainless Steel
• Shape: Rectangular
• Certification: ISO 9001:2015
• Application: Laboratory Use
• Color: White
• Condition: New
• Finishing: Polished
• Height: 5ft
• Approx. Price: Air Volume

• Country of Origin: India
• Size: Standard
• Type: Vertical
• Material: Stainless Steel
• Shape: Rectangular
• Application: Laboratory Use
• Color: White
• Finishing: Polished
• Brand Name: Bright Star

Laboratory Fume Hoods are an ideal health and safety care measure. The company provides Laboratory Fume Hoods to control the transfusion of toxic chemicals in laboratories. The Laboratory Fume Hoods, we offer, are constructed in accurate structures. Our Laboratory Fume Hoods are designed in compliance with the standards set by professionals, for their proper construction.

Based in Delhi, we are a prominent Laboratory Fume Hood Manufacturer and Supplier. Laboratory Fume Hood is used in laboratories for protecting them from hazardous chemical gases and acid fumes. Conforming the set industry standards, our Laboratory Fume Hood is designed in different specifications to meet diverse requirements of the customers.

• Size: 10ft, 4ft, 5ft, 6ft, 8ft
• Type: Fume Hood
• Material: Metal, Stainless Steel
• Shape: Rectangular, Square
• Application: Laboratory Use
• Color: Black, Grey, Red, Silver, White
• Condition: New, Used
• Finishing: Non Polished, Polished
• Height: 5ft, 6ft, 7ft, 8ft
• Approx. Price: Air Volume

We are offering fume hood. Labsol laboratory fume hood is a ventilated enclosure designed to contain and exhaust fumes, vapors, mists and particulate matter generated within the hood interior. Fume hood structures are basically boxlike, with an open side (or sides) for access to the interior of the hood. A transparent, movable panel, called a sash, allows the user to restrict or enlarge the hood opening. The hood is connected, via ductwork, to an exhaust fan, usually located on the roof of the building in which the hood is located. The exhaust fan draws air from the room in which the hood is in through the hood opening and out through the ductwork. The speed of the air moving through the hood opening is known as face velocity. labsol fume hood is fabricated from special grade pre coated mild steel sheet duly powder coated from outside and epoxy painted from inside. The inner walls of the working chamber is covered with epoxy coated asbestos or frp or hdpe lining or as required which duly provides better protection from acid fumes in the lab. labsol fume hoods are aerodynamically designed considering most efficient airflow to the suction. Double wall feature provides easy access to utilities like water, gas, vacuum & electricity. Detachable base storage cabinets are provided with castors for easy maintenance, sigma offers variety of lining & work surfaces like granite, ceramic, s.s., p. P. & frp. Sash is provided with 6 mm toughened glass & counter balance is provided to achieve easy movement. High performance centrifugal blower is provided with different ducting materials like pppvchdpe etc. Baffle removable plates incorporated into the rear or top of the work chamber to form a plenum between the work chamber and the exhaust duct connection to promote uniform scavenging of fume and the point of discharge. Exhaust system all exhaust air ductwork, fan and associated equipment installed between the point of connection to the fume hood and the point of discharge.

• Material: SS 304
• MODEL NO.: KI- 231
• Power: 220V, 50 Hz, Single phase.
• Available Sizes: 2’x2’x2’, 3’x2’x2’, 4’x2’x2’, 5’x2’x2’, 6’x2’x2’

Walk in fume hood is a regarded as a great way to handle odors and toxic fumes from processing units and distillation assemblies. These floor standing fume hoods can feature services like air, gas, nitrogen or any other type of gas. Weiber mobile fume hoods are ducted or ductless as per choice, microprocessor based, advanced and CE marked equipments are designed for both laboratory and industrial application like:   Extraction of fumes, aerosols and dusts from the internal workspace to prevent dangerous toxic concentrations from escaping into the laboratory For avoiding the creation of a dangerous, potentially explosive atmosphere in the internal workspace Protection against dangerous extrusive substances Protection against flying debris, compounds or particles from the internal workspace Microprocessor based controls Welded superstructure for structural rigidity and design flexibility to contain large equipment and conveyances Three-piece baffle system with three adjustable dampers to regulate lighter- and heavier-than-air gases Airfoil around top and sides of sash opening, with electrical fixtures and plumbing controls mounted on bias surface Electrical switches and receptacles. Also explosion-proof lighting and fixtures available. Air velocity monitor/alarm Blowers – selected to match hood and ductwork configuration, corrosive or ignitable exhaust fume Removable exterior side panels. Double wall construction for ease of routing service piping. Lights are mounted above a sealed safety glass panel keeping corrosive fumes and hazardous vapors isolated. Safety equipment for operators, tested according to EN 14175

• Durable and chemical-resistant construction: High performance centrifugal blower
• Powder Coated Mild Steel / Stainless Steel MOC: Ductless design
• Double wall construction: Easy to clean surfaces
• Vertical or horizontal sliding sash: Efficient fluorescent lighting
• Energy saving blowers: CE & ISO certified

Laboratory Fume Hood Stations by Bionics Scientific are available in various sizes and dimensions to meet specific requirements of your research. These fume hoods have a choice of vertical or horizontal sliding sash and MS or stainless steel construction. The standard sizes of our fume hoods are available in most demanded requirements (4ft, 5 ft, 6 ft & 8 ft).   Often known as chemical fume hood, these systems also dilute effect on flammable gases and vapors. Our product range includes general purpose fume hoods, ductless fume hoods, and mobile units; designed with number of optional features and specifications required to meet critical challenges in laboratory research areas worldwide.   Construction: Our fume hood cabinets come with double wall construction made of Epoxy Coated Mild Steel or Stainless Steel as required by customer. It is ensured that the exterior is matched with the base unit. The inner walls and baffles are made of molded reinforced thermoset epoxy resins that meet or exceed NFPA 45 standard on Fire protection for laboratories using chemicals. The jambs are radiuses and aerodynamically designed to reduce the turbulence as the air enters the hood. The construction materials are used as mild steel, type 304 or 316 stainless steel (Epoxy Coated).   Sashes: Our standard models are generally equipped with vertical sashes but as required horizontal sashes can be fixed. The sliding sash rides in 18 gage type 316 stainless steel stainless steel sash guides. Tempered safety glass is used as standard.   Controls: Equipped with easy to use controls which are fixed outside the working area in order to provide convenient working environment. These units have start / stop switches for whole the unit and a light on / off switch.   Lighting: Supplied with fluorescent bulb shielded from the hood interior by laminated safety glass or tempered glass panel. The bulb is operated by a on / off switch and bulb changing process is done from the hood exterior without major disassembly of the unit.   Alarm: Equipped with highly reliable audio / visual alarm device capable enough of detecting a drop or rise in airflow (no static pressure) through the hood unit. If the hood exhausts volume falls below a preset exhaust level, the alarm will alert the operator by sound and visual sign. The monitor also uses dual theristor or dual diode sensing system to measure the velocity. The sensor is mounted in a flow tube placed on either side wall or front face of the fume hood. Local Audible and visual alarms have capabilities for remote monitoring hook up. These systems are designed in both ducted and ductless pattern.     All Fume Hood models are equivalent to international quality standards and are manufacturing under ISO certified quality system. To know more aboutprice list, quotation, warranty and supply details please contact Bionics Scientific. The support team will assist you with precise information you require.  

WaiometraFume Hood is based on the principle to provide a work area which is free from all the potentially hazardous fumes or chemical effluents that may be emitted during the course of a given experiment or procedure. Waiometra Fume Hoods capture the fumes released during an experiment by drawing fresh air from the environment, pass the user and get into the unit. This way the concentration of the chemical fumes/effluents are kept at the minimum possible levels in and around the breathing zone of the user. The vector of the air in the fume hood points to the inward direction and perpendicular to the face of the user. The velocity of the air is controlled at approximately 80 to 130 feet per minute, so as to control the particle kinetics of various aerosols and diffused gases

• Size: 10ft, 4ft, 5ft, 6ft, 8ft
• Material: Metal, Stainless Steel
• Shape: Rectangular, Square
• Certification: ISO 9001:2008
• Application: Laboratory Use
• Color: Black, Grey, Red, Silver, White
• Condition: New, Used
• Finishing: Non Polished, Polished
• Height: 5ft, 6ft, 7ft, 8ft
• Approx. Price: Air Volume

• Country of Origin: South Korea
• Type: SHINYOUNG LAB SOLUTION & TECHNICS
• Brand Name: SHINYOUNG LAB SOLUTION & TECHNICS

As a general by-pass type FUME HOOD, it is possible to quickly discharge harmful gas generated during the experiment to the outside by distributing the shape of the airflow according to the structure of the BAFFLE and CEILING and the degree of opening/closing of the SASH.Fume HoodLab BenchReagent CabinetBSC/Clean BenchOther Laboratory Fixtures.

  Fume Hood Roch Mechatronics Inc Fume Hood are designed for:. Durable, Hazardous Chemical Gas Removal Wide variety of Material for User Selection Slide Type Door with acrynic/Tempered Safety Glass Powerful exhaust Fan Blower Built-In Utility cabinaet Application based work plateform, SS/granite/ceramic tiled

Laboratory Fume Hoods are one of the most important components used to protect laboratory personnel from exposure to hazardous chemicals and agents used in the laboratory. When used properly, they can provide an effective backup safety device for the containment and exhaust of toxic, offensive or flammable materials when the containment of an experiment or procedure fails and vapors or dust escape from the apparatus being used. We are one of the foremost Chemical Fume Hood Manufacturers and Stainless Steel Fume Hood Suppliers. The Cabinet is made of thick ply board & reinforced with teak wood whatever necessary interiors coated with asbestos sheets, coated with epoxy paint or convert FRP lining as per requirements. Working table is covered with glazed ceramic tiles and provided with necessary water inlet & outlets with sink (stainless steel/prosaleen). Provision of water inlet/outlet, sink will be on request only. Front door is made of 6mm clear glass in laminated teakwood frame and connected with a counter weight balance through a iron rope. The door will have the provision of vertical sliding facility. Exhaust blower consists of single phase motor, directly connected with a PVC Exhaust blower consists of single phase motor, directly connected with a PVC impeller and enclosed in a epoxy coated MS casing. The rating, speed & capacity of the Blower sill are designed on the basis of the SIZE & VOLUME of the FUME HOOD. However the suction velocity of the FUME HOOD will be around 100 cfm per square feet. The exhaust assembly can be of build-in-type or external mount type. The blower assembly will directly be connected with suitable exhaust ducting, which is made of PVC pipes with suitable bend & joints and rain guard.   Chemical & Fire resistant Phenolic(FRP) Resin Lining inside the Chamber Different choice of worktops suitable for a wide range of applications (S.S/ GRANITE/TILES) Clear tempered safety glass sash utilizes counter weights for smooth and effortless operations Options : Compact Ductwork System with Exhaust Fan Fume Scrubber Wash-Down System Electrical Wiring Solvent Storage Base Cabinet Acid Storage Base Cabinet Fire Proof Tiles

Obromax fume hood are to limit a person's exposure to hazardous andor unpleasant fumes. For worker protection, the laboratory fume hood is the most useful piece of safety equipment found in the lab. When used appropriately, fume hoods not only provide protection from toxic gases and vapors but also provide protection from unanticipated fires and explosions. Fabricated out of thick wooden board these are designed . Outer is finished with sunmica and inner epoxy painted. Working table top is fitted with acidalkali resistant tiles stainless steel and a small wash basin with connections provided for inlet and out let of water. The front door moves vertically up and down with concealed counter balanced weight. The unit if fitted with flourescent light and a gas cock for gasair supply. The space under the work station can be provided with storage compartments for storage purpose. The front facing panel is fitted with 155 amp socket with switches for exhaust system and fluorescent light. To work on 220230 volts a.c. Supply. Working size- 2’x2’x2’ 3’x2’x2’ 4’x2’x2’ 6’x2’x2’