G. S. A. Industries Rampura, Delhi

We cater to customer demand with comprehensive range of Wall Mount Stabilizer which is based on DSP technology. This stabilizer is used in diverse industries, owing to advanced load management, high durability, long service life, low power consumption and space benefit nature. The product is very small and light in nature which makes it highly efficient.

We deals in VCB Battery Charger, designed to accept wide input voltage range and delivering ripple free DC output in supremely cost efficient manner. Fabricated using highest quality raw materials, these low maintenance and quickly rechargeable chargers are immensely durable and reliable. Made by our highly qualified professionals, these are suitable for genset as well as on the Mains supply.

Precisely engineered in accordance to the set industry norms, the offered three phase transformer is valued for its easy operation, thermal stability and consistent performance. To ensure a defect-free range, the three phase transformer undergoes rigorous quality assurancetesting procedures. Control Transformers are to supply power to control and or auxiliary equipment not intended for direct connection to the main source. Control Transformers are specifically used to provide control supply voltage for the control circuits of AC motor starters, i.e. Starter coils, timers, indicating lamps electronics protection relays etc. Control Transformers for contractor applications have to Energize the coil and Maintain a contact for definite period of time. The initial energizing of the coil takes 5 to 40 mil. seconds and requires 3 to 10 times the normal current. While calculating the VA rating of the Control transformer, this factor should be taken in to account. They are available for single phase and three phase inputs and are in the range from 15 VA to 30 KVA.

We develop Three Phase Servo Voltage Stabilizer which is used in various applications. It is made with the best in class material, which is procured from reliable sources. The machine which we use for fabrication is kept in good working condition for increase its efficiency.

Frequency : 47 - 53 Hz

We are indulged in providing specialized Three Phase transformers used to change values of three phase voltage and current and made up of three sets of primary and secondary windings. Our supremely experienced professionals use only the finest quality materials and follow all international specifications during making of these quality transformers. Our three phase transformers are available from 500 VA TO 200 KVA.

GSA offers you a wide range of high quality Switching Mode Power Supplies. Switching Mode Power Supplies are used in all areas of control and automation such as Machine tools, Packaging, Injection Moulding, Automobile Industries, Process Industries and other Automated Systems.

The Summation Ct is developed by using advance KPV knee-point-voltage technology and premium grade of raw material. The product is developed as per the requirements and demand of the customers.

We Are Developing Quality Range Of Smps Battery Charger, Which Is Designed To Accept Wide Input Voltage Range And Providing Ripple Free Dc Output. The Charger Is Quickly Rechargeable And Need Low Maintenance. These Features Make It Extremely Durable And Reliable.

We are involved in manufacturing Voltage Stabilizer by utilizing finest grade of raw material. It is made available to the patron in numerous models having different specifications.

Frequency : 47 - 53 Hz

Ambient Temperature : 0° to 55° C

We are one of the leading providers for the comprehensive range of Single Phase transformers which are used in motor control, machine tool control, control panels, alarm systems and distribution boards. We have an army of highly qualified and experienced professionals who manufacture these transformers with leading technology and quality finish. All units have 100% copper windings CRGO CRNGO transformer core, Overload Shutdown Terminals Blocks covered with sheet for protectionClosed Terminal blocks.

We are one of the leading providers for the comprehensive range of Single Phase transformers which are used in motor control, machine tool control, control panels, alarm systems and distribution boards. We have an army of highly qualified and experienced professionals who manufacture these transformers with leading technology and quality finish. All units are single phase 50Hz 60 Hz, All units have 100% copper windings CRGO CRNGO transformer core, All units are designed to operate at 55°C Rise, 105°C Insulation to Minimize Heat, Overload, Shutdown Terminals Blocks covered with sheet for protectionClosed Terminal block.

Resincast Transformer is made with supreme grade of components and advanced technology. The transformer is perfectly finished in charming colors that gives it longer service life. It is completely sealed to impart excellent performance even in flame retardant, polluted, corrosive atmosphere and vibration proof. Transformers are electric equipment that changes the voltage and the current of electricity to facilitate its efficient transmission and distribution. Transformers are commonly used at power generation facilities to increase voltage and to decrease current in order to transport electric energy across transmission lines. When the electricity reaches the end user, transformers are used to reduce voltage and to increase current to make the electricity suitable for general use. The process of transforming voltage results in energy loss that is released in the form of heat and therefore transformers must contain effective cooling systems. Transformers are differentiated by their cooling systems (this is one of several ways that the transformer industry classifies its products). Dry type transformers dissipate heat directly into the ambient air. Liquid cooled transformers (e.g. oil filled transformers) dissipate heat into liquid mediums.

Transformers are electric equipment that changes the voltage and the current of electricity to facilitate its efficient transmission and distribution. Transformers are commonly used at power generation facilities to increase voltage and to decrease current in order to transport electric energy across transmission lines. When the electricity reaches the end user, transformers are used to reduce voltage and to increase current to make the electricity suitable for general use. The process of transforming voltage results in energy loss that is released in the form of heat and therefore transformers must contain effective cooling systems. Transformers are differentiated by their cooling systems (this is one of several ways that the transformer industry classifies its products). Dry type transformers dissipate heat directly into the ambient air. Liquid cooled transformers (e.g. oil filled transformers) dissipate heat into liquid mediums.

We are India based renowned manufacturer supplier and exporter of huge range of Protection CT's. It range operate exactly above 100% and upto 10 to 15 times of rated current i.e., overloads. It helps in providing true fault signal to the relay. The range has high capacity to handle the large current and is costly and bulky in nature. This protective and metering Current Transformer cannot be interchanged for use.

We are providing a premium range of AutomaticManual Battery Charger For 1500 Battery which is fabricated in compliance with international quality standards. The product is portable and detachable which make it applicable for various uses. The range is known for its high durability, long service life and excellent performance. It has 3 phase input with servo controlled voltage helping in providing constant voltage.

We are engaged in providing well constructed range of 24VDC 36VDC48VDC Fully AutomaticManual Battery. It is developed with superior grade of raw material and modern technology. The product is used in industrial and commercial sectors due to its high performance, high durability and international quality standards. The Manual Battery Charger is available with IP voltage of 160VAC -270VAC and OP voltage of 12 VDC 24VDC 36VDC 48VDC and charging voltage of 13.5 VDC 27VDC 38VDC 50VDC.

The main line stabilizer is made with best grade of raw material and sophisticated technology. It is used for different electrical application hence we ensure its longer performance. This stabilizer is known for its following features: Float Cum Boost Charger, Generator Compatible, Hi-Frequency PWM Inverter.

Precisely engineered in accordance to the set industry norms, the offered Industrial Isolation Transformer is valued for its easy operation, thermal stability and consistent performance. To ensure a defect-free range, the Industrial Isolation Transformer undergoes rigorous quality assurancetesting procedures.

A varied assortment of Industrial Battery Charger, designed to accept wide input voltage range and delivering ripple free DC output in supremely cost efficient manner. Fabricated using highest quality raw materials, these low maintenance and quickly rechargeable chargers are immensely durable and reliable. Made by our highly qualified professionals, these are suitable for genset as well as on the Mains supply.

In the Float Cum Boost Battery Charger there are two separate sections namely float charger and boost charger housed in the same sheet steel cubicle. Float charger delivers requisite voltage to the equipment and simultaneously keeps the battery in trickle charge condition. Whenever main supply goes of battery sub-starts supplying the equipment load. When power supply resumes boost charger is switched on and battery bank is connected to the discharged battery. Again when battery gets charged it is transferred back to the float section to maintain its terminal voltage by applying trickle charge to it.

Our Power Distribution Transformer is used to provide final voltage transformation in the electric power distribution system. It settles down the voltage used in distribution line to the level which is used by the customers. If it is mounted on the utility pole it is known as pole mount transformer and if it is located at ground level or underground and mounted on create pad is known as pad mounted transformer. The Distribution Transformers are designed by using iron as they are operated for 24 hours. It carries maximum efficiency at lower loads which is about 60 or 70% of full or even less load. Further, the voltage regulation in these transformers is kept minimum for better efficiency.

Frequency : 50 Hz, 60 Hz

Winding Material : Copper / Aluminium

Our DC regulated power supply are widely used in various industries and educational Institutes. The output voltage produced by our DC Regulated Power Supply ranges from 0 to 1000 V and output current ranges from 0 to 100 Amp. Our power supply is provided with Digital Panel Meters for voltage and current. Additionally, equipped with power supply overload and short circuit protection. The input power required by our power supply is 230 V or 110 V ±10%, and 5060 Hz with operating temperatures 0 to 50oC. Moreover, we can customize these as per the specification provided by our clients.

We are one of the leading manufacturer and supplier of DC Power Supply with 3 phase input, fabricated from superior quality of raw materials. With features like short circuit protection, overload, over voltage and over heat protection along with lock for each output, these are a dummy text of the printing and typesetting industry. Available in 50VDC, 15 amp, 750W, with Voltage Range: 300 V – 450 V and Frequency Range: 47 Hz – 63 Hz, these are made in our state of the art production unit with international quality standards. Short Circuit Protection overloadover voltageover heat.

The Core balance CT is used for various application in various industries. The product is made available to the market in various specifications. It is developed in conformation with international standards of quality by utilizing high grade raw material.

System Voltage : 11KV