Galvanized Pipe Dealers in Punjabi Bagh, Delhi

• Material: Galvanized Iron
• Shape: Round
• Length: 5-10Mtr
• Application: Industrial
• Feature: Rust Proof, Perfect Shape
• Finishing: Polished

• Shape: Round
• Unit Length: 3m
• Outer Diameter (mm): 20 and 25
• Diameter: 1 inch

Used for scaffolding and fencing applications, our Hot Dip Galvanized Pipes are especially fabricated with the help of Electric Resistance Welding process. We are amongst the chief Manufacturers, Exporters, and Suppliers of the long lasting Hot Dip Galvanized Pipes, thus offer these at competitive prices. Description Tubes are made from edge trimmed mild steel strips that are slitted from hot rolled low carbon steel coil and conforms to IS: 10748-1995. These edge trimmed strips are formed mechanically into required circular shape and high frequency electricity, i.e., 4,50,000 cycles/second is then used to fuse the pipe together to form a weld joint thus become homogeneous part of the completed tube. The tubes then passes through the sizing section where dimensional tolerance if any are corrected, where after they are cut to length and ends beveled before hydrostatic testing. Thereafter they are sent for protective surface finishing operation such as Hot Dipped Galvanizing or Varnishing as per the specific requirements. The tubes are offered beveled, plain ended or threaded with screwed & socketed. Size Ranging From 15mm NB to 300mm NB with installed capacity (as per international standard BS/EN/ASTM A53 SCH 40) of 2,40,000 MT per annum (UL Approved pipes) Thickness Range From 2.00mm to 10.00mm Applications Automotive PurposesIdlers / ConveyorsStructural PurposesElectric PolesScaffoldsWater, Gas & Sewage pipesWater wells (casing pipes)Air, Steam, Oil & Gas transmission Manufacturing Process Step – 1 Purchasing Raw Material (Steel/Skelp) Material received from SAIL / ESSAR Steel Ltd. / Lloyds / ISPAT or other any approved vendor. The steel shall be fully conformed to the API 5L / IS Standard Specification or as per Customer’s Specification. Testing/ Checking and Identification of Raw material shall be done as per API 5L / IS Standard Specification.Step – 2 Edge Preparation & Milling Edges of Coil / Skelp are form in edge breaking unit at initial stage so that perfect forming is achieved at welding area. Strip edges are given mill cut on both sides with edge milling machine to make the edges clean and square for perfect butt welding with high frequency. It shall be done before passing the strip to forming process.Step – 3 Forming of Pipe Strip is passed in number of horizontal rolls after edge breaking and form cages supported by vertical rolls to receive an open edge round tube before welding. At the final stage of forming, rolls are provided with guide fins to have a proper proportionate gap and correct entry in welding roll.Step – 4 High Frequency Welding Finally the pipe shape performed after forming process, it passed through welding heads followed by the seam guide. The process of welding is based on ERW process. Electric welding shall be performed with a minimum welder frequency of 200 KHz. The fusion takes place through a roll assembly set for proper welding. Bead trimming shall be done as per API 5L / IS Standard or as per Customer Specification.Step – 5 Seam Normalizing Normalizing is carried out on weld and HAZ after welding at the temperature of 8500 C to 9000 C. The temperature of seam normalizing is monitored by a non contact indicator having the digital display along with recorder. Equipment: Seam Normalizer Capacity : 500 KWStep – 6 Sizing A set of sizing roll is ahead of cooling zone, water cooled pipe is passed through sizing rolls which control the Ovality and required dimensions, which is finally verified with measuring instruments as specified in relevant Specification.Step – 7 NDT Testing (Eddy Current) Eddy current testing is the process of inducing small electrical currents in an electrically conductive article and observing the resultant reaction between the magnetic fields involved. Equipment: Eddy Current Flaw Detector (PC based).Step – 8 Finishing of the Pipes Finished pipe are cut to required length by cut of carriage. Thereafter both ends of pipes are beveled by the end facer. Finally each pipe are checked for its Outer diameter, Inner Diameter, Thickness, Straightness, and length.Step – 9 Hydro Testing After completing all the above process, all pipes transferred to the hydro testing bench. The test pressure shall be given to the pipes as per relevant specification or as per Customer Requirement.Step – 10 Galvanizing Process Hydro Test passed pipes are send for Hot Dip Galvanizing confirming to various Indian Standard / International Standard.Step – 11 Marking Marking on the pipes shall be paint stenciled as stipulated in API 5L/ IS Standard or as per the customer’s requirement, on each length of the pipe

SWASTIK PIPE LTD uses the Electric Resistance Welding process to manufacture galvanised pipes and tubes ranging in nominal diameter from 15mm (1/2 inch) to 300mm (12 inches) and in wall thickness from 2.00mm to 10.00mm.

We are offering gi pipe. size 1/2" 3/4" 1" 1-1/4" 1.5" 2" 2-1/2" 3" 4"

• Grade: Yst 210,240, & 275
• Size ranges Available: 15 mm NB to 150 mm NB
• Specification Code: IS-1239 (PT-1) 200

We are offering galvanized steel pipes.we are a trustworthy name for exporting and supplying top class quality galvanized steel pipes. Galvanized steel pipes that we provide are highly praised for their consistent performance, flawless functioning and longer service life. available in sizes : 1/2 inch (15 mm) nb diameter to 12 inch (300 mm) nb diameterseries : light (a class), medium (b class), heavy (c class) and extra light (a-1 class) length : 5.8 mtrs and 6.0 mtrs 4 to 7 mtrs conform to the following international and indian standards iso : 65-1981 (e) standardsis 1161is 1239 is 3589astm a53 grade a & grade b,bs 1387din 2440bs en 10255en 10224jisg3452din en 10255 din 2441 din 2439

We Offer Light weight G.I. Pipe, Pre-Galvanised Pipes, galvanised pipe.

Galvanized Iron Pipe, Black Pipe, Gi Pipe

Galvanized Pipes, Cold Rolled Steel Strips, Erw Galvanized Steel Pipes

Galvanized Iron Pipes, Erw Pipes, Hot Rolled Strips, Stainless Steel Tube

Galvanised Pipes, Pipes, Pipe Fittings, Pvc Pipe, Steel Pipes, tubes

GI Pipes   Galvanized Steel are those steel that has been covered with a layer of zinc metal. During galvanizing, steel is immersed in a molten zinc bath, ensuring a tough, uniform barrier coating. Zinc's natural corrosion resistance provides long-term protection, even in outdoor environments.

GI Pipes, Cs Seamless Pipes, square hollow section pipe

GI Pipes, ms black pipes, electric pole, Gi Pipe, Crash Barrier

Galvanized And Erw Black Gi Iron Pipes, Tin Sheet, tin plate sheets

Galvanized Welded Steel Pipe, cold rolled tube, Honed Seamless Tube

Galvanized Steel Pipes, Erw Pipes, Galvanized Steel Tubes

Pre Galvanized Pipes, Aluminum Alloys, Galvanized Steel Sheets

Gi Pipe, Door Handle, toilet sheet, Pvc Pipe, Pull Handle, kitchen handle