Ground & Phase Protection Relay Dealers in Delhi

• Brand Name: ANLY CKC
• Usage/Application: Phase Loss Reverse Protection Relay Phase Sequence Controller
• Model Name/Number: APR-4
• Voltage: 380 VAC
• Current: 10 AMPERE
• Contact Form: SPDT

We are offering TECO Phase Sequence Corrector Relays are used for protection of Motors, Pumps and Transformers etc. From damage due to missing phase sequence. A wrong sequence is corrected and two output contacts are provided which can be used to switch on the power contractors. Only the correct sequence contractor signal will be on at a time. However contractors must be interlocked during power wiring. The relay resets automatically and remains off when voltage is low, zero, unbalanced or negative phase sequence. All contacts are 5A potential free.

• Brand Name: Fastball
• Color: Multicolor
• Condition: New
• Power Source: Battery
• Automation Grade: Automatic
• Application: Industrial Use, Fiber fault locator
• Feature: Easy To Use
• Operating Temperature: High Temperature
• Type: Cable Fault Locators
• Frequency: 10mw
• Country of Origin: India

• Specification: ower (P), Radio (R)& 33kHz Generator Modes (G)

Stanlay is manufacturer and supplier of cable locator, cable avoidance tool, cable route tracer, cable finder at discounted price in India.

• Brand Name: C.Scope
• Usage/Application: Telecom and oil/gas utility environments.
• Depth Range: Max 2 m - 9.99 m
• Battery Type: 8 X AA (LR6)
• Operating Time: 40 Hours + Spare Battery Holder
• Size: 720 mm X 280 mm X 65 mm
• Weight: 2.65 Kg
• Locate Accuracy: Better than 10% of Depth
• Depth Accuracy: +/- 5% @ 1m
• Depth Resolution: 0.1 m (0.4")
• Current Measurement: 0.1 mA to 100 mA
• Frequency Range: 512Hz,640Hz,8kHz,33kHz,131kHz
• Memory: 2 GB
• Display Type: LCD Display
• Sensitivity: 5mA,25 microA,5 microA,100 microA

• Number of Poles: 3 Pole
• Current (Amps): 630 A
• Model Number: MC61A-nX
• Application: Electric Timer
• Voltage Type: AC
• Voltage (V): 220 v

• Brand Name: TCC
• Fault Distance Range: 240M, 480M, 1000M, 2000M, 4000M, 8000 M
• Measurement Mode: TDR (Time domain Reflectometer)
• Fault Measurement Accuracy: 1meter
• Pulse Width: 40ns---10us
• Pulse Amplitude: 0-30v adjustment adaptive
• Cable Constant (VOP) range: 100-300
• Impedance matching: Automatic
• Gain adjustment: Automatic and manual
• Testing accuracy: +/- 1%×cable length
• Measurement dead zone: 0 Meter
• Output Impedance: 25-120Ù adaptive
• Sampling Speed: 100 MHz
• Memory Location: U-disk
• Serial port for PC / Printer: USB
• Resolution: 1 Meter
• Gain Range Control: 1-99
• Display Readout: Color LCD and 480*280
• Power Supply: 7.4v rechargeable Li-ion battery
• Charging time: 3 hours
• Continued operating time: 8 hours
• Charging Voltage: 230V+/-10%, 50Hz. Single Phase
• Storage Temperature: -15 Deg C
• Working Temperature: -15 Deg C
• Weight: 1.1 Kg
• Dimension: 212 (L) × 170 (W) × 90 (H) mm
• Usage: Industrial
• Model: TCC 100
• Material: ABS
• Features: Measurement maximum 8 km
• Item Code: TCC100

• Country of Origin: India
• Type: Pen Visual Fault Locator
• Application: single-mode or multi-mode fibers
• Power: 10mw
• Product Dimensions: ‎8 x 5 x 7 cm
• Optimization: 2hz Glint
• Universal Adapter: 2.5mm

• Battery Life: 20 Hours
• Storage Temperature: -40 Degree Fahrenheit To 158 Degree Fahrenheit 
• Brand Name: Stanlay
• Number of Batteries: Twelve AA batteries
• Model: EML100
• Weight: 2.04 kg 
• Dimensions: 77.978 cms x 19.812 cms x 32.512 cms 
• Operating Temperature: -4 Degree Fahrenheit to 122 Degree Fahrenheit

We are the leading supplier of the underground cable or pipe detection equipment's, which has very important roll due to urbanization, smart city projects which are all the way, now people dig and get shocked heavily and died also because of high tension line inside the road.

• Power: 2 AAA batteries
• Laser Output: 30 mW
• Laser Wavelength: 650 nm
• Connectors: 1.25 mm connector FC (or) 2.5 mm universal connector
• Dimensions: 175 mm long x 26 mm diameter
• Usage: Industrial

Locates visual faults including tight bends, breaks and bad connectors Accelerates end-to-end fiber checks Ergonomic case survives drops, impacts and vibrations Supports 2.5 mm and 1.25 mm SFF connectors Easily verifies polarity and identifies fibers Features continuous and flashing modes Over 80 hours of battery life with two AA batteries

Insulation resistance measuring,Measuring aux. voltage UH : ±24 V,Measuring frequency : fH = 0.5 Hz,Measuring resistance range : 1 KΩ to 1 MΩ,Max. input voltage : 600 V DC,Exciter DC current measuring ,Nominal current IN : 10 A DC,Power consumption in current circuit :

• Brand Name: EXFO
• Dimension: 245 mm x 45 mm x 55 mm
• Model Number: TG-300B
• Weight: 0.35 kg (0.8 lb (without batteries)

• Brand Name: Applied Eltek
• Display: Digital
• Wavelength: 650 nm (visible wavelength)

Full feature digital pipe and cable locator that has fully automatic left-right guidance mode, but also has a completely manual mode. Integrated one-h...

• Brand Name: Technoac
• Usage/Application: Cable fault locator
• Model Name/Number: TDR-TA1.9
• Length: 246 mm
• Dimensions: 70 x 246 x 124 mm
• Display: Color TFT 5.7

• Material: ABS
• Number of Poles: 8PIN/14PIN
• Brand Name: Omron
• Model Name/Number: MY-GS
• Coil Voltage: 12VDC/24VAC,DC /110VAC, DC220VAC
• Usage/Application: Control Panels
• Voltage Type: AC

• Frequency: 50 kHZ
• Brand Name: Leica
• Features: High performance , Portable and rugged, Easy to use.
• Weight: 0.7 kg
• Model: Digicat 550i
• Usage: Industrial

• Brand Name: GTEX
• Operating Temperature: -20 C to +55 C
• Dynamic Range: 126 dB
• Battery Life: Continuous 30 hours intermittent 82 hours
• Gain Control: Manual gain adjustment & automatic centering

• Battery life: 80 hours
• Output Power: 1mW
• Dynamic Distance: 10, 20 KM
• Minimum Order Quantity: 1 Piece

• Brand Name: Fluke
• Dimensions: 157 x 52 x 37 mm (6.2 x 2.0 x 1.3 inch)
• Weight: 0.18 kg (5.7 oz)
• Battery Life: 80 hours in continuous mode
• Minimum Order Quantity: 1 Unit

• Display: 3½ Digit bright LED display.
• Resolution: 0.1%.
• Power: 220 V AC ± 10%.

Digital Cable Fault Locator is a precision instrument, easy to use, which provides spontaneous display of the location of break in pair wires and cables. Unlike conventional cable fault locators in which a lengthy procedure of obtaining a null point in a galvanometer and then computing the faulty length of cable is to be gone through, here the faulty cable is just to be connected, one setting to be made and location of fault in terms of total length directly read on display upto a resolution of 0.1%.

• Usage: Industrial
• Mounting Type: DIN RAIL MOUNTED
• Material: ABS
• Country of Origin: Made in India
• Weight: 400-500kg

We are offering cable fault locator.

• Model Name/Number: XR-1
• Brand: SEG
• Voltage: 250 V AC
• Weight Gram: approx. 0.5 kg
• Resetting Time From Pickup: <1 s
• Returning Time From Trip: 500 ms
• Temperature Range at Storage And Operation: - 25 DegreeC to + 70 DegreeC
• IP Protection: IP40 at closed front cover
• Temperature Effect: 0.1 % per K