Hammers Dealers in Anand Parbat, Delhi

Often, existing concrete structures will need to be examined and tested to ensure the concrete remains of adequate strength and durability. Rebound hammer surveys can be conducted to provide a rough estimate of concrete strength, where it is not possible to determine this by more accurate means such as core extraction and testing. The test involves using a special rebound hammer, which measures the recoil of a piston against the concrete surface when a standard force is applied. This recoil can then be correlated approximately to concrete strength. The rebound hammer consists of a barrel in which is housed a hammer mass attached to an impact spring which slides on a guide bar. A plunger is attached to the guide bar which is pressed against the surface to be tested. As the piston is pressed against the surface to be tested, on reaching the compressive strength, the hammer mass is released and rebounds to a certain extent, according to the strength of the surface, which is indicated by a rider on a calibrated scale. A lock button fixed on the body of the hammer lock the rider in place and the rider can be reset to zero Position by using the same button. The equivalent compressive strength can be computed from the chart supplied. It is suitable for specimen of compressive strengths 100-700Kg/cm. The instrument, complete with a grinding stone for polishing the test surface, is supplied in carrying case.

Drop Forged alloy steel heads.Hardened and Tempered. Ground and Polished. Seasoned Hardwood Handles, Drop Forged alloy steel heads.

• Handle Material: Wooden Handle
• Corrosion Resistance: Yes
• Type Of Hammer: Sledge Hammer
• Overall Length: 32 inch
• Head Material: Iron

• Color: Blue
• Rust Proof: Yes
• Material: Mild Steel
• Surface Finishing: Paint Coated
• Operation Mode: Semi Automatic
• Power Consumption: 7.5 KW
• Voltage: 220 V

  We are the leading manufacturer & Supplier of superior Quality Digital Concrete Test Hammer. Concrete Test Hammer is designed specifically for the non-destructive testing of concrete structures. This method has considerable advantages over conventional methods of assessing the compressive strength of concrete in that large areas can be tested in a very short time at a very low cost .

We are offering Hammers. we are manufacturer and exporter of different type of hammers like ball pein hammer, chipping hammers, claw hammers, club hammer, cross pein hammer, machinist hammer, sledge hammer, six in one hammers, chaser hammer, swiss style hammer and many more. we are manufacturer & exporter of different type of hammers like ball pein hammer chipping hammer   claw hammer  claw hammer steel shaft club hammer   cross pein hammer   machinist hammer sledge hammer   chaser hammer swiss style hammer six in one hammer etc.

• Application: Laboratory
• Weight: 450 Gm
• Finishing: Portable
• Warranty: 6months
• Brand Name: Steco
• Material: Steel
• Use: Impact Testing
• Spring Extension: 75 mm

Product Code: EKE 025   EKE 02-501: Anvil EKE 02502: Front wheel EKE 00503: Hammer Guide Assembly EKE 02504: Fall Hammer attached to a flexible rope and drum, operated manually. EKE 0205: Base Assembly for the hammer system with suitable wheels for moving about when attached to a vehichle. Essential Accessories ( included in the standrad outfit) EKE 016: Spit Spoon sampler EKE 02: Tripod with Pulley and built in Ladder EKE 02402: 'A' Drill Rod,1.0 m long, with adapter   Optional Acessories   EKE 017: Split spoon sampler, with Liner EKE 13401: Dynamic Cone plain, 50 mm dia bae and come angle of 60 degree EKE 13402: Cone Adapter with standard threads EKE 13403: Dynamic Cone Threaded for Type 'A' Rod Coupling.   It is desighned to deliver equal impact energy in each blow while performing Standard Penetration Test. This is acheived by providing a trigger mechanism to standardise the height of fall and a suitable guide system for maintaning vertically of guide rod and drill rod assembly. The guide system also maintains their alignment throughout the duration of the test. The system is compact and easy to use, provides maximum safety for the operator.

Veekay Industries is ranked among the prominent Concrete Test Hammer Manufacturers, Exporters and Suppliers. Our Concrete Test Hammer instrument is easy for quick and estimated measurement, of the resistance to pressure of the produced concrete products. The principle, on which our Concrete Test Hammer works, is based on the rebound impact of a hammer on a piston, which rests beside the surface of the concrete products. The greater the resistance of the concrete, greater will be the rebounded impact. By reading this rebound impact on a scale and relating it to curves on graphs supplied with the Concrete Test Hammer, the resistance to pressure in MPa or PSI can be found, with 20%.

We are providers of Vibratory Hammers, which is a specialized equipment used consistently at construction sites. The Vibratory Hammer is electrically operated. Our Vibratory Hammer has several uses. Some of them are listed below. Specifications Used for changing the soil formation with the use of its vibration Used for driving hammers into heavy or hard piles Used for the compaction of concrete cubes of 150mm & 100mm.

Description With the help of our experienced professionals, we are continuously engaged in manufacturing and exporting of Ball Pein /Cross Hammers at reasonable prices. Features: Perfect dimensions Easy installation Corrosion resistance

• Type: Pneumatic Hammer
• Application: Construction, Household, Industries
• Weight: 0-3kg, 3-5kg
• Finishing: Non-Polished, Polished
• Driven Type: Pneumatic
• Handle Material: Aluminium, Copper, Metal, Steel, Wooden
• Feature: Durable, Magnetic Nail Start, Precision Balanced, Rust Proof, Slip-resistant Handle
• Handle Length: 10inch, 11inch, 12inch, 7inch, 8inch, 9inch

• Minimum strength: 10MPa
• Maximum strength: 60MPa
• Thickness: 0.3 mm

kEWIL Concrete Test Hammer Useful for non-destructive estimation of quality of concrete of a finished structure and its relative compressive strength. The instrument consists of a casing in which a hammer mass, special spring, hammer locking and release mechanism are housed. A spherical ended plunger projects at one end which, when pressed against the test surface, actuates the release mechanism of the hammer mass. It gives an impact on the plunger. The hammer mass rebounds after the impact and an indicator registers the amount of rebound on a linear scale. The compressive strength of the material can be computed from the calibration diagram supplied with each hammer. It gives results within +15% of actual compressive compressive strength.

forging hammers, close die forging hammers, open die forging hammers

Hammers, Industrial Tools, carpenters tools, Plumbing Tools, Handtools

power hammer, kids video games, ipod video games, Bumper Boat