Hammers Dealers in Karol Bagh, Delhi

• Minimum strength: 10MPa
• Maximum strength: 60MPa
• Thickness: 0.3 mm

Veekay Industries is ranked among the prominent Concrete Test Hammer Manufacturers, Exporters and Suppliers. Our Concrete Test Hammer instrument is easy for quick and estimated measurement, of the resistance to pressure of the produced concrete products. The principle, on which our Concrete Test Hammer works, is based on the rebound impact of a hammer on a piston, which rests beside the surface of the concrete products. The greater the resistance of the concrete, greater will be the rebounded impact. By reading this rebound impact on a scale and relating it to curves on graphs supplied with the Concrete Test Hammer, the resistance to pressure in MPa or PSI can be found, with 20%.

• Impact Energy: 6,8 J
• Weight Without Cable: 5.5 kg
• Features: Light weighted,Stronger in functionality,Perfect finishMany sizes available,Excellent approach,Cost effective rates
• Rated power input: 1,025 W
• Impact rate at rated speed: 2750 bpm
• Toolholder: 17 mm HEX

• Material: Steel
• Application: Concrete Testing
• Brand Name: Steco
• Voltage: 220 V
• Frequency: 50/60 Hz
• Grade: Semi-Automatic
• Strength: 100-700 Kg/cm

Product Code: EKE 025   EKE 02-501: Anvil EKE 02502: Front wheel EKE 00503: Hammer Guide Assembly EKE 02504: Fall Hammer attached to a flexible rope and drum, operated manually. EKE 0205: Base Assembly for the hammer system with suitable wheels for moving about when attached to a vehichle. Essential Accessories ( included in the standrad outfit) EKE 016: Spit Spoon sampler EKE 02: Tripod with Pulley and built in Ladder EKE 02402: 'A' Drill Rod,1.0 m long, with adapter   Optional Acessories   EKE 017: Split spoon sampler, with Liner EKE 13401: Dynamic Cone plain, 50 mm dia bae and come angle of 60 degree EKE 13402: Cone Adapter with standard threads EKE 13403: Dynamic Cone Threaded for Type 'A' Rod Coupling.   It is desighned to deliver equal impact energy in each blow while performing Standard Penetration Test. This is acheived by providing a trigger mechanism to standardise the height of fall and a suitable guide system for maintaning vertically of guide rod and drill rod assembly. The guide system also maintains their alignment throughout the duration of the test. The system is compact and easy to use, provides maximum safety for the operator.

• Impact Energy: 6,8 J
• Weight Without Cable: 5.5 kg
• Features: Light weighted, Stronger in functionality, Perfect finish, Many sizes available, Excellent approach, Cost effective rates.
• Rated power input: 1025 W
• Impact rate at rated speed: 2750 bpm
• Tool holder Size: 17 mm

• Weight: 2 Kg
• Part No: 0 611 258 2K1
• Drilling Dia: In Concrete : 4-18 mm, In Steel:13 mm, In Wood : 30 mm
• Power Input: 550 W
• No Load Speed: 0-1550 rpm
• Impact Rate: 0-4500 ipm
• Single Impact Force: 1.7 j

Description With the help of our experienced professionals, we are continuously engaged in manufacturing and exporting of Ball Pein /Cross Hammers at reasonable prices. Features: Perfect dimensions Easy installation Corrosion resistance

Drop Forged alloy steel heads.Hardened and Tempered. Ground and Polished. Seasoned Hardwood Handles, Drop Forged alloy steel heads.

A geologist's hammer, rock hammer, rock pick, or geological pick is a hammer used for splitting and breaking rocks. In field geology, they are used to obtain a fresh surface of a rock to determine its composition, nature, mineralogy, history, and field estimate of rock strength. In fossil and mineral collecting, they are employed to break rocks with the aim of revealing fossils inside. Geologist's hammers are also sometimes used for scale in a photograph

• Material: Cast Iron
• Power Supply: AC Supply
• Weight: 1.4 Kgs.
• Phase: 3 phase
• Product Type: Test Hammer
• Voltage: 440 V

Often, existing concrete structures will need to be examined and tested to ensure the concrete remains of adequate strength and durability. Rebound hammer surveys can be conducted to provide a rough estimate of concrete strength, where it is not possible to determine this by more accurate means such as core extraction and testing. The test involves using a special rebound hammer, which measures the recoil of a piston against the concrete surface when a standard force is applied. This recoil can then be correlated approximately to concrete strength. The rebound hammer consists of a barrel in which is housed a hammer mass attached to an impact spring which slides on a guide bar. A plunger is attached to the guide bar which is pressed against the surface to be tested. As the piston is pressed against the surface to be tested, on reaching the compressive strength, the hammer mass is released and rebounds to a certain extent, according to the strength of the surface, which is indicated by a rider on a calibrated scale. A lock button fixed on the body of the hammer lock the rider in place and the rider can be reset to zero Position by using the same button. The equivalent compressive strength can be computed from the chart supplied. It is suitable for specimen of compressive strengths 100-700Kg/cm. The instrument, complete with a grinding stone for polishing the test surface, is supplied in carrying case.

kEWIL Concrete Test Hammer Useful for non-destructive estimation of quality of concrete of a finished structure and its relative compressive strength. The instrument consists of a casing in which a hammer mass, special spring, hammer locking and release mechanism are housed. A spherical ended plunger projects at one end which, when pressed against the test surface, actuates the release mechanism of the hammer mass. It gives an impact on the plunger. The hammer mass rebounds after the impact and an indicator registers the amount of rebound on a linear scale. The compressive strength of the material can be computed from the calibration diagram supplied with each hammer. It gives results within +15% of actual compressive compressive strength.

power hammer, kids video games, ipod video games, Bumper Boat

• Type: Double Face Hammers
• Application: Construction, Industries
• Condition: New
• Handle Material: Wooden
• Hammer Type: Double Face Hammer
• Material: Mild Steel
• Hammer Length: 6-8 Inch

The concrete test hammer is an instrument, which is easy to use, for quick and approximate measurement of the resistance to pressure of manufactured concrete products. The principles on which it works are based on the rebound impact of a hammer on a piston, which rests against the surface of the concrete products. The Greater the resistance of the concrete, greater is the rebounded impact. By reading this rebound impact on a scale and relating it to curves on graphs supplied with the instrument, the resistance to compression in MPa or PSI can be found, with 20% of actual.Consists of a barrel in which is housed a hammer mass attached to an impact spring which slides on a guide bar. A plunger is attached to the guide bar, which is pressed against the surface to be tested. As the piston is pressed against the surface to be tested, on reaching the compressive strength, the hammer mass is released and rebounds to a certain extent (according to the strength of the surface) which is indicated by a rider on a calibrated scale. A lock button fixed on the body of the hammer, locks the rider in place and the rider can be recared to zero position by using the same button. The equivalent compressive strength can be computed from the chart supplied. Each hammer is calibrated against at standard test hammer, and is suitable for specimen of compressive strengths 100 - 700 kg/cm. The instrument, complete with a grinding stone for polishing the test surface, is supplied in carrying case.