Heat Exchangers Dealers in Okhla, Delhi

• RANGE: 28 Kg per sq. cm

Abacus offers Fin & Tube Air Cooled Condensers from 1TR to 60TR capacity. These Condensers are designed for an optimum combination of high heat transfer performance & low operating cost. The staggered tube, corrugated plate fin provides a highly efficient air flow pattern through the condenser. Copper tubes are mechanically hydraulically expanded assures maximum fin-tube bonding for optimum heat transfer. Air Cooled Condensers are tested at 28 Kg per sq. cm gauge with dry nitrogen. Fin & Tube type Condensers for sea water marine application or with steels shells are also offered & designed as per customer specific requirements.

• Brand Name: OZO

Aluminum Heat Sink 80mm x 50mm x 50mm for Solid State RelayOzo make Heat sink are available for Single phase SSR and Three phase SSRThey are avaiable in both black and white colour

• Type: Panel Cooler
• Material: Fiber, Stainless Steel
• Power Type: Double Phase, Single Phase
• Automatic Grade: Automatic
• Warranty: 1year
• Quality: Best

Electronic Control Systems installed in CNC machines and other special purpose machines generate heat during operation. Apart from heat, moisture-laden air and dust also adversely affect electronic controls. We offer premium Panel Coolers to maintain a clean environment required in Electronic Control Panel Cabinets using a closed loop design. This ensures locking out of excessive heat caused by high ambient temperatures, moisture and dust. The clean air, within the Control Panel cabinet, is continuously cooled by the refrigeration system and re-circulated and the required operating temperature can be maintained within the cabinet; thus maintaining cool, clean, moisture free, environment at all times. We are amongst the reliable Providers of the Panel Coolers. Features Sleek modular design compatible with any control panel Imported (German) make backward curve blowers & fans Digital temperature controller / indicator Easy to install and maintain Powder coated cabinet Proven components Wide range of models Typical Applications For Panel Coolers CNC Machines Electronic Cabinets Instrumentation Panels Automation Systems Mainframe Computers Automated Process Industries

• Material: S135
• Length: 3m
• Color: Black
• Size: 60 mm

• Material: Aluminium
• Color: SILVER / BLACK
• Type: AC To AC,AC To DC,DC To DC,DC To AC
• Brand Name: Omron, Schnieder Electric, ABB
• Heatsink Size: 80 X 50 X 50 MM
• Fin Style: Square Fin
• Phase: 1 Phase

• Country of Origin: Made in India
• Material: ABS
• Height: 19
• Heat Transfer Type: Double Pipe
• Usage/Application: For Food Processing Industry
• Flow Type: Cross Flow

BENCHMARKS OF EXCELLENCE Lloyd Electric and Engineering Limited (Lloyd Coils), the nation’s leading manufacturer of fin and tube type heat exchangers for HVAC & R applications, is technology-driven and Knowledge-based leader in its fields of operation.Equiped with the most advanced equipment and machinery, including from global leaders like Oak of USA and Hidaka of Japan, the company’s formidable manufacturing infrastructure is driven by its team of dedicated technocrats and professionals with a dynamism that is virtually peerless

Heat Exchanger are built in a wide variety of sizes from 6 inch to 40 inch in diameter. Length vary from 3 feet to 40 feet over the tube heads. The Heat Exchangers are designed for a pressure of 20 Kg per sq.cm gauge on shell side and tube side. The Heat Exchangers are fabricated as per TEMA ASME unfired pressure vessels codes & ASHRAE standards requirements. Heat Exchangers for sea water marine application or with steels shells are also offered & designed as per customer specific requirements.

The rate of producing waste heat is called the thermal power, P. Usually the base current IB is too small to contribute much heat, so the thermal power is determined by the collector current IC and the voltage VCE across the transistor. Power transistors usually have bolt holes for attaching heat sinks, but clip-on heat sinks are also available. Make sure you use the right type for your transistor. Many transistors have metal cases which are connected to one of their leads so it may be necessary to insulate the heat sink from the transistor. Insulating kits are available with a mica sheet and a plastic sleeve for the bolt. Heat-Sink compound can be used to improve heat flow from the transistor to the heat sink, this is especially important if an insulation kit is used. The heat is not a problem if IC is small or if the transistor is used as a switch because when 'full on' VCE is almost zero. However, power transistors used in circuits such as an audio amplifier or a motor speed controller will be partly on most of the time and VCE may be about half the supply voltage. These power transistors will almost certainly need a heat sink.

Pin Fin Heat Sinks Star Heat Sinks Modular Heat Sinks Modular Active Heat Sinks High Bay Heat Sinks LED Bar Profiles

Abacus offers Shell & Tube type Inter After Coolers for use in multistage compressed air systems. These are designed for direct floor mounting arrangement. These are available in standard horizontal vertical models, with or without built in Moisture Separators. These are available from 30 CFM to 10,000 CFM. These are designed at 7 Kg per sq. cm gauge or as specified by client. For Inter After Coolers of higher capacities at different pressures please contact us.

• Material: Carbon Steel
• Primary Exchanger Material: Steel
• Warranty: 12 months
• Color: As per client
• Tube Material: Copper
• Automation Grade: Manual

A re-boiler is a heat exchanger that is used to generate the vapour supplied to the bottom tray of a distillation column. The liquid from the bottom of the column is partially vaporized in the exchanger, which is usually of the shell and tube type. The heating medium is most often condensing steam, but commercial heat transfer fluids and other process streams are also used. We have designed, engineered, and manufactured the following types of reboilers Kettle re-boiler Vertical thermosyphon re-boiler/li> Horizontal thermosyphon re-boiler Fired re-boiler Forced flow re-boiler/li> Internal re-boiler

We are engaged in design and manufacture of Industrial Heat Exchangers, Condensers, Oil Coolers and Air Coolers to meet individual customer̢۪s requirements. Heat Exchanger is a device for transferring heat from one fluid to another, where a solid wall separates the fluids so that they never mix each other. The fabrication of our Multi Tube Heat Exchangers is done in accordance with ASME Code of practice. Apart from this, we are counted as one of the major Heat Exchangers Exporters from India.

copper brass heat exchangers, aluminum brazed heat exchanger, Radiators

FRP Cooling Towers Metallic parts fully galvanizedpowder coatedepoxy coated. Completely corrosion resistant. Absolutely leak proof. Direct Driven axial fan to avoid belt and gear drives. Honey comb PVC fill - increases surface area, splits incoming air and water into several streams spreading equally across the tower cross - section. Bottle Type design to withstand high wind velocity. Sudden shocks and vibrations. Can absorb air from all directions. Can take water temperature upto 80° C Aesthetically designed, compact and low weight. Can be installed on roof - tops under free flow of air.

Lloyd electric and engineering limited is leading manufacturer of fin and tube type heat exchangers for hvac & r applications, is technology-driven and knowledge-based leader in its fields of operation.equiped with the most advanced equipment and machinery.

heat exchanger parts

Stainless Steel Pipe, Steel Tube

pvc eliminator, Star Cable Rubber Cable, Teflon Cables, Snake cable

Electric Motors & Engines, Cooling Tower & Chilling Plant

Chilling Plant

Heatsink, Sheet Metal

Hot Plates, knife handle, Industrial Clothing, wire machinery, Jugs

Air Conditioners

Furnaces

Marine Chilling Compressor, Condenser, Plate Heat Exchangers, Steam Turbines