Hotplate Stirrers Dealers in Delhi

MR-SMS-HS-Analog Hotplate Stirrer   Features A traditional magnetic stirrer with modern design  Stainless steel plates and with/without hotplate porcelain enamel surface  Safe separate circuit, automatically stop to heat when the temperature over 350C(SMS-HS)  Variable speed of motor  Motor with electronic speed control, constant speed even during changes in load  High magnetic adhesion, prevent the stirrer bar escape Enclosed assembly(IP42)  guarantees long service time   SPECIFICATIONS Square/Disc optional Voltage[VAC] 110/220 Frequency[Hz] 50/60 Power[W] 500 Max. stirring quantity(H2O)[L] 20 Stirring point position quantity[mm] 80 Motor type :brushless motor Speed range[rpm] 0-1600 Speed and temperature display :scale Plate material:Material Ceramic coating surface/Stainless steel Dimension of Plate[mm] f135 or 155 Heating Temperature Range[C] RT-380 Temperature sensor of extra position PT100(Optional) Packing size:0.37X0.28X0.18cm Weight:3kg Permissible ambient temperature[C] 5-40 Permissible ambient humidity 80% RS232 interface yes   MR-SMS-S-Analog Magnetic Stirrer   Features A traditional magnetic stirrer with modern design  Stainless steel plates and with/without hotplate porcelain enamel surface  Safe separate circuit, automatically stop to heat when the temperature over 350C(SMS-HS)  Variable speed of motor  Motor with electronic speed control, constant speed even during changes in load  High magnetic adhesion, prevent the stirrer bar escape Enclosed assembly(IP42)  guarantees long service time   Specifications Square/Disc optional : Voltage[VAC] 110/220  Frequency[Hz] 50/60:Power[W] 20  Stirring point position quantity 1 Max. stirring quantity(H2O)[L] 20 Stirring point position quantity[mm] 80 Motor type  brushless motor,Motor power[W] 20 Speed range[rpm] 0-1600,Speed display scale Material Stainless steel(Ceramic surface) Dimension of Plate[mm] f135 Packing size-0.37X0.28X0.18cm Weight:3kg   MR-SMS-HS18 Standard Analog Magnetic Stirrer with Hotplate   Specification Packing size:45X35X29cm Voltage[VAC] 110/220 Frequency[Hz] 50/60 Power[W] 650 Stirring point position quantity 1 Max. stirring quantity(H2O)[L] 20 Stirring point position quantity[mm] 80 Motor type brushless motor Motor power[W] 20                                                                               Speed range[rpm] 100-1600 Speed display  scale Material  Ceramic surface Dimension of Plate[mm] 180X180 Heating power [W] 650 Heat rate(1Lwater)[K/min] 6 Heating Temperature Range [C] RT-500                                            Temperature display Analog Scale                                                     Temperature display accuracy [C] 500 Dimension[mm] 340X250X190 Weight[kg] 5 Permissible ambient temperature[C] 5-40 Permissible ambient humidity 80% Protection class acc. to DIN EN60529 IP42   MR-SMS-MS18 Standard Analog Magnetic Stirrer   Specification Packing size:45X35X29cm Voltage[VAC] 110/220 Frequency[Hz] 50/60 Power[W] 20 Stirring point position quantity 1 Max. stirring quantity(H2O)[L] 20 Stirring point position quantity[mm] 80 Motor type brushless motor Motor power[W] 20 Speed range[rpm] 100-1600 Speed display scale Material Ceramic surface Dimension of Plate[mm] 180X180 Dimension[mm] 340X250X190 Weight[kg] 5

• Brand Name: Micronvac
• Warranty: 1 year
• Capacity: 2 liters
• Speed range [Rpm: 2200rpm
• Size: (L)-230cm,(w)-165cm,(H)-90cm
• Dimensions: (L)-230cm,(w)-165cm,(H)-90cm
• Material: Stainless Steel
• Diameter Inch: (L)-9"inch,(W)-6.5"inch,(H)-3.5"inch
• Heating Power W: 20w
• Hot Plate Surface: 6.5 X 6.5
• Metal Type: Stainless steel
• Motor Rpm: 2200rpm
• Motor Type: DC
• Power Hz: 50/60 Hz,
• Power Supply V: 100
• Power V: 220-230v
• Power Watt: 20 Watt

• Power supply: 220 Volts 50 Hz
• Power supply: 220 Volts 50 Hz
• Optional: Digital temperature controller,  Digital timer,  Digital RPM display,  Any specific dimension,  Multi-position .

• Application: Industrial
• Resistivity: Rust Resistant
• Material: Metal
• Durability: Long Life
• Surface Finishing: Polished
• Drive Type: Electric

RS00S0102 MAGNETIC STIRRER (WITH HOT PLATE) These apparatus are intended for stirring solutions of low viscosity in open or closed vessels. Stirring is accomplished by a magnetized Teflon coated paddle to be placed in the container. Each apparatus of this group can be operated on a bench, a stand or a laboratory scaffold as well. The intensity of stirring, depending on requirements, can be adjust with the thyristorised voltage controller incorporated which also ensures steeples adjustments from very low to the maximum agitation & Heating is Controlled by Energy Regulator. Features: � Space efficient design support that makes these ideally suited for bench tops as well as inside of bio-hoods � Allows heating as well as stirring to be performed simultaneously � DC motor support that provides for stable speed at start as well as low heat emissions � Heater capacity provided in 550W which offers for rapid heating support Specifications: � Case made available in MS and Aluminum metal finish with support of heat cured epoxy coating � Top heating plate stainless steel � Display provision of stirring speeds � Four stirring modes for - o Constant speed, clockwise o Constant speed, counter clockwise o Auto reversing mode for slow acceleration & fast acceleration � Memory feature that allows stirrer to operate exactly as before switch off � Outputs protected against overloading through limiting circuit � Heater capacity of 300W for allowing rapid heating � Capacity of 2 Liter, 5 Liter, 10 Liter, 20 Liter � Works on electric supply of 220/230 Volts, 50/60 Hz AC

Magnetic Stirrer with Hot plate (1417)   VITCO magnetic stirrer is suitable for any type of stirring operation involving volumes from a very little quantity of liquid upto one litres. Stirring is accomplished by means of small rotor sealed in Teflon And is capable of rotating by magnetic field underneath at different Speed which is controlled by a regulator.Hot plate can also be fitted for heating the liquid before or during the Operation stirring.Magnetic Stirrer with heating systemMagnetic stirrer with hot plate & energy regulator.Capacity 2 Liter, 5 Liter, 10Liter

Features : LED digital display for easy reading Special plastic casing is high temperature resistant and strong flame retardant Temperature is up to 280°C and the safety temperature is 50-320°C Stainless steel ceramic coated hotplate allows for immediate heat 3D digital wheel adjust the speed and temperature Automatically identified temperature sensor PT1000 and transfer to PT1000 operation mode

• Capacity: 1 ltr / 2 Ltrs. / 5 Ltrs. / 10 Ltrs.

• With S.S. top hotplate. • Temp of hotplate up to 70°C. • It has speed regulator for varying speed of stirring and energy regulator for temperature • Teflon coated stirrer paddle will be provided • RPM of motor upto 1200 rpm • Electric supply : 220 - 240 V, 50 Hz single phase • Capacity 1 ltr 2 Ltrs. 5 Ltrs. 10 Ltrs.

Features • Magnetic stirrer suitable for unsupervised operation, with new stir technology   • Automatic judgement stirring bar displacement and capture  • Hotplate with stainless steel surface or porcelain enamel surface with excellent chemical resistance • Easy-to-read backlit LCD display   • Fuzzy logic control microprocessor technology guarantee maximum control accuracy   • Multiple modes ensure the stirring function not change due to external factors  • With the control of safe temperature,suitable for unsupervised operation  • 2 adjustable safety circuits ,separateness temperature sensor, protection temperature can be set • Temperature sensor for heat transfer fluid and medium available(PT100)  • Warning display indicating presence of any residual heat when the unit is switched off  • PC control via RS232 interface

• Weight: 1.8 kg
• Model: AMI0102003
• Stirring Position: 1
• Set-up Plate Dimension (mm): Φ 135mm
• Set-up Plate Material: S.S with ceramic coated
• Motor Type: DC motor
• Max. Stirring quantity (H20) (L): 5
• Max. Stirring Bar (L x Φ, mm): 55*10
• Motor Rating input (W): 3
• Motor Rating output (W): 2.5
• Speed Range (rpm): 100-1500
• Speed Display: LED
• Heating Output (W): 600
• Heating Temperature Range (°C)                                                                     : Room Temperature -280
• Temperature Display: LED
• Temperature Display Accuracy (°C): ±0.1
• Safety Temperature (0C): 50-320
• Extermnal Teperature Sensor: PT1000
• Control accuracy with external temperature sensor PT1000 (0C): ±1
• Hot Surface Warning: 500°C
• Permissible Ambient Temperature (°C): 5 - 40
• Permissible Related Humidity: 80%
• Protection class according DIN EN 60529: IP 42
• Voltage (VAC):  200-240/100-120
• Power (W):  630
• Dimension (W x D x H, mm): 268 x 160 x 85

Experience the latest technology of stirring with "MAC" Ceramic Coated Magnetic Stirrer. Equipped with LED display for set and actual temperature. Available with external PT-100 sensor (optional) for precise control of temperature with on accuracy of ±1°C. Separate safety circuits and warning indications, for over temperature even in the switch "OFF" condition.

• Stirring quantity (h2o) L.: 05
• Speed range, rpm: 100 to 1000rpm.
• Temperature range, 0C: ST 3200C
• Dimension (w x d x h): 190 x 220 x 180
• Stirrer Paddle: 9 x 35 mm
• Electrical Supply: 230 v DC 50 Hz single phase

The Hally series of Heavy Duty magnetic stirrers features with stainless steel hot plate & additional spillage collection stainless steel tray with drain. Stirring by heavy duty PMDC motor which deliver torque even at lower speeds and maintains speed stability despite viscosity or volume changes. Acurate stepless speed control allows smooth variation up to 1000 rpm. Heating energy is controlled by energy regulator. Features:   Economic magnetic stirrer with stainless steel heating plate. DC motor for higher torque at low speed Better low speed stirring even with small volume Accurate stepless speed control maintains excellent speed stability Specially designed for corrosive atmosphere reducing the chances of fumes entering the unit Spillage collection tray with drain outlet

• Material: Stainless Steel
• Usage/Application: Laboratory
• Phase: Single Phase
• Operating Voltage: 220V
• Frequency Rate: 50-60Hz

• Color: White
• Material: Mild Steel
• Model Name/Number: VLT HP 053
• Brand: Labquest
• Capacity: 0-20 L
• Speed Range: 2200 RPM
• Size: 220 x 330 x 115 mm

Hotplate Magnetic Stirrer, Sensors, UV Visible Scanning Spectrophotometer

Measuring Cylinder(Glassware), Sartorius Micropipette, Cryostat Microtome

Hotplate Magnetic Stirrer, Tissue Culture Dishes, universal pipette tips