Hydraulic Machine Dealers in Mundka, Delhi

Technical Specifications Type Vertical Four� Columns� Type Structure, Frame is fabricated out of ultrasonically tested Steel Plates duly welded with suitable reinforcements to give strength & load during operation. Capacity Of The Main Ram 120 MT (1no.) No. Of Cylinders / Ram 1 no. main Cylinder + 2 nos. side Jacking Cylinders for� blank� holder�s� fast down &� fast� up movement + 6 nos. blank� holder� cylinders fixed� at� equal distance for uniform distribution of blank holder force or better clamping of sheet + 1 no. ejector cylinder . Bed Size or Bolster Plate 1100 mm (LR) x 900 mm (FB) Bore (piston) Dia. of Main Cyl. 11" Stroke Length Of Main Cylinder 500 mm (Adjustable) Open Daylight 700 mm Blank Holder Cylinder's Capacity 80 Tons Stroke Length Of Blank Holder Cylinders: 300 mm Advanced or Approach Speed 90 - 100 mm/sec. (Approx.) Drawing Speed 8 - 10 mm/sec. (Approx.) Return Speed 120 - 150 mm/sec. (Approx.) Working Pressure 200� to 210 kg/cm2 Electric Motor 15 H.P.,3phase,1440 R.P.M., ABB Make Pump Double Pumps for high & low speeds Operation PUSH BUTTON OPTD. WITH�ELECTRICAL�CONTROL PANEL.Both auto /manual mode of operationPLC - Operated control panel PLC Omron / Siemens make with coloured touch screen for user friendly operation. Weight Of The Press 6 - 7 Tons( Approx.) T-Slots Size T-20

• Usage: Deep Draw application
• Material: Mild Steel
• Phase: 3 Phase
• Brand Name: Parrytech 
• Automatic Type: Automatic / Semi Automatic
• Bed Size: As per customer requirement

We are the leading manufacturers, exporters and supplier of this products.

• Brand Name: Hysan
• Capacity: 50-80 Blocks/hr (without automation),80-110 Blocks/hr (with automation)
• Usage: Recycling
• Motor Power: 30 Hp
• Feeding Chamber Size (H*W*L): 23*24*50 inches
• Block Size(H*W*L): 12*24*6 inches
• Weight Of Block: 13-15 kgs
• Working Liquid: Hydro/Enclo 68
• Working Pressure: 3300 Psi
• Operation: PLC/Push Button Type
• Oil Tank Capacity: 800 Ltr
• Machine Weight: 8 Tons
• Overall Dimensions (H*W*L): 8.5*8.5*13.5 Feet

• Type: Paper Cutting Machine
• Certification: CE Certified
• Weight: 450KG
• Color: Grey, White
• Voltage: 220v
• Condition: New
• Application: Paper Cutting
• Rated Power: 3.5kw
• Automatic Grade: Automatic
• Driven Type: Elecric, Hydraulic
• Brand Name: HAMADA JH530
• After-Sales Service Provided: Seller
• Max Cutting width: 530mm
• Min Cutting depth: 30mm
• Max Cutting height: 80mm
• Cutting precision: ±0.3mm
• Mode of clamp: Hydraulic/ Mechanical
• Mode of Cutting: Hydraulic
• Mode of pushing: Motor Pushing
• Hydraulic Pump: mechanical (very less Maintenance)
• Program: Program-control (100*7 programs)
• Display: 7 inch Touch screen

• Driven Type: Hydraulic
• Color: Light White
• Condition: New
• Automatic Grade: Fully Automatic
• Power: 1-3kw
• Type: Toe Lasting Machine
• Warrenty: 1year

This is a specialized piece of equipment designed for the shoe manufacturing industry. It plays a crucial role in shaping the uppers of shoes to the lasts without the need for manual cementing. This machine streamlines the shoe production process, enhances product quality, and increases production capacity. Cement Elimination: This machine eliminates the manual cementing process by providing a reliable mechanism for attaching shoe uppers to lasts without the need for adhesive. Even and Close Attachment: It features a band and wipers that ensure the uppers are attached to the lasts evenly and closely, resulting in improved shoe quality. Adjustable Pressure: Operators can adjust the pressure for pressing the toe part of the shoe, preventing over-lasting and excessive pulling down of the uppers. This customization enhances precision in the lasting process. Independent Pincers: The machine is equipped with 9 independent pincers that can be adjusted to fit various shoe toe shapes. It also includes automatic balancing and descending mechanisms for improved quality and increased production capacity. Last Support Plate: To prevent lasts from slipping off during the process, the machine has a rising mechanism and heel supporter integrated into the last support plate. Customizable Settings: Various switches and adjustments are available to customize the machine for different shoe sizes and operations, ensuring versatility in production. Cement Applicator: Additional wipers and a cement applicator can be adjusted to ensure perfect attachment of the toe upper to the last. Independent Adjustment: The pincers and fixed plate can be adjusted independently to optimize the attachment of uppers to lasts, accommodating various shoe designs. ModelBS-737A Dimensions (LWH) 1710 x 950 x 1950 mm Capacity 2000 (Pairs)/8 Hr N.W. (Net Weight) 1100 Kgs Power 2 HP Heating 1000 W Oil Pressure 50kg/cm2 Hydraulic Oil 100 litres (68 no.)

We are a reliable name for availing different types of Rubber Curing Hydraulic Press. Our Rubber Curing Hydraulic Press is PLC operated fully automatic machine that is known for its powerful performance. The Rubber Curing Hydraulic Press is used for making rubber seals and P.U seals. Having auto ejection system, our Rubber Curing Hydraulic Press is widely demanded in the national market. Why Our Rubber Curing Hydraulic Press? Sturdy builtDurableHigh functionalityEasy to operate

We are the leading manufacturer and exporter of Hydraulic Deep Drawing Press with Die Cushion. We offer heavy duty frame type deep draw press, hydraulic deep drawing presses, which are widely used in different industries to manufacture deep drawing components. These are heavy duty, high performance, pillar type hydraulic press for manufacturing deep drawing press components. Impeccably equipped with most advanced hydraulic & electronic (PLC) control. They are designed for high off center loads with heavy RAM force. Accurate slide guiding with full stroke length is helpful to provide the better accuracy & effective performance of the presses. Deep draw press is perfect for deep drawing automobile sheet metal components, oil tanks, stainless steel kitchen sinks, mudguards etc. Instructions: Model No. Cap ton Platen Size (MM) Day Light Gap (MM) Main Cyl. Stroke (MM) Die Cushion Cap. (Ton) Die Cushion Cyl. Stroke (MM) Die Cushion Table (MM) Motor H.P FDCP 150 150 600 X 600 600 400 60 250 300 X 300 20 FDCP 250 250 900 X 750 750 450 100 300 450 X 300 40 FDCP 400 400 1350 X 1000 800 500 160 300 800 X 500 30 x 2 FDCP 500 500 1500 X 1000 800 500 200 350 900 X 600 40 x 2 FDCP 600 600 1600 X 1200 900 600 240 400 900 X 600 60 x 2 FDCP 800 800 1800 X 1500 1000 600 320 400 1000 X 800 60 x 2 FDCP 1000 1000 2100 X 1800 1200 750 400 450 1200 X 1000 75 x 2 FDCP 1200 1200 2500 X 2000 1200 750 480 500 1500 X 1200 100 x 2 Note: The Press Is Available Up To 2000 Ton Capacity As Per The Customer Requirement The Press Will Be Available With Pillar Gate Frame Type High Capacity Press Will Be Preferred In Column Type The Press Will Be Manufactured As Per The Customer Requirement The Press Can Be Provided With Speed As Per Your Requirement The Motor H.P Can Be Changed As Per The Speed Provided

• Weight: 25- 40kgs
• Brand Name: All
• Material: Steel
• Power Consumption: 200
• Use: Industrial
• Shape: Any

Advance Hydrautech is a leading manufacturer of corrugated box scrap baler machines. We have proficiency in manufacture of quality recycling equipment such as cardboard baling machine and shredders. This single cylinder vertical corrugated box scrap baling machine is capable to produce the bundle size of 24” X 36”. This baler can compress paper; plastic, pet bottle & OCC scrap easily. All the machines manufactured by our company must be gone through proper testing before deliver it to client. Our quality team ensures the purchase and utilization of the best quality raw material tested and proven at the latest R&D labs. With ability to mould in different customization situation, we boast for timely delivery of this range at customer satisfaction. Advance Hydrau-tech has designed a unique set of world class machinery for preparing high quality scrap processing machines.

Totally European design, The machine are strong and easy to use machines which can cut and punch all kinds of materials such as plate, square bar, angle, round bar, channel and an on. Sante( Industrial hydraulic ironworkers have been designed and built to the highest quality standards.Adopt integrated hydraulic control system, more reliable and easy for maintenance. Hydraulic system is from Bosch — Rezroth, Germany, Yuken (Japan) All seals in cylinder is PARKER from USA, the most famous brand, good quality and high performance Being able to work under toted load continuously, stable working and high precision.

Pressing of cased-in books and simultaneous burning-in of the JOINTS for forming perfect hinge and permanent shape with the help of temperature-controlled pressure blades (Joint Forming Bars) for Flat or Rounded Spine of Book-Blocks. These blades are spring loaded for adjusting to different depth of joints automatically and hydraulic pressure can be set from 100-300/400kgs to achieve the desired results. The bars (Joint Formers) are supplied for Flat and Rounded Spine Book-backs respectively.Temperature of the Joint Formers is set through Digital Temperature Controller (PID) to suit properties of Glue (Adhesive), Binding material and operating speed. The PLC (Programmable Logic Controller) enables choice of single or multiple stroke/s for accurate control of burning-in the Joints and consistent results. Counter on PLC indicates number of books processed at the end of each cycle. The system automatically releases the book on completion of the set timing cycle. Back-gauge (setting handle mounted on the front panel) is provided for faster make-ready / production; Light Guide indicates the Joint Forming position and also reduces the make-ready time. Specially designed operator Safety Device in addition to Emergency Switch incorporated.Provision for Joint Forming of foam padded cases available.PLC based control panel for optimum reliability and simplified diagnostics. Press equipped with Castors for maximum space saving / utilisation.

• Electrical Supply: 380/415V AC 50 Hz 3Ph

Ideally suited for pressing and bundling of folded sheets (signatures), brochures, book- blocks etc. For perfect and hard-case binding process. The hydraulically pressed bundles preserve the freshcrisp look of the print as it prevents air & dust from spoiling the folded sheets(signatures). It protects the edges and facilitates stacking & storing of the bundles (pre post gathering collating) for optimum utilization of space. Push-buttonfoot-switch operated hydraulic system has a built-in power saving device. When the push button or foot-switch is activated, the motor automatically gets switched-on. The motor also gets switched-off as soon as the pre-set pressure (adjustable upto 2000kgs) is attained. Reset push button for release of the bundle and the moving platen returns to its set-open position. Groovesslots provided on pressure plates of fixed & moving platens for guiding the tape(strapbelt) cord(string) and prevent it from getting entangled with the pile of signatures. Tray provided on moving platen for storing excess length of cord tape strap and for placing the end support planks (plyboard hardboard). Clip on the left hand side of the fixed platen provided for holding one end of the tape (strap) cord (string). Motor remains switched off during idle period, the same comes on when any of the function i.e. Forward reset of the moving platen is activated. This is a power saving feature. Control panel is located for maximum operator convenience. Castors provided for maximum space utilisation & mobility.

• Automatic Grade: Automatic, Semi-Automatic, Manual
• Control Type: Hydraulic
• Brand Name: Santec
• Max Force or Load: 0-30 ton, 30-60 ton, 60-90 ton, 90-120 ton, 120-150 ton, >150 ton
• Minimum Order Quantity: 1 Ton

• Voltage: 240V
• Model Name/Number: JTH-S-80T/3200
• Automation Grade: Semi-Automatic
• Brand/Make: Jiatai
• Bending Force: 80 ton
• Frequency: 50 Hz
• Bending Length: 2500 mm

• RED: green

We manufacture hydraulic scrap baling press (bale weight up to 25kg to 600kg and eight hours production upto 10tones to 70 tons), hydraulic cold forging (capacity 600tons to 1200tons), hydraulic jack(capacity 1ton to 100ton), deep drawing press, broaching machine, etc. bale machine designed on customer demand according to their required production and bale weight. machine manufactured by us are easy to operate and handle with long running time and less maintenance and competitive price.

• Type: Triple Action
• Voltage: 440 V
• Weight: 55 Ton
• Country of Origin: Made in India
• Usage/Application: Industrial
• Model Name/Number: ARS 35X35
• Bail Weight: 80 kg
• Platen Size: 950mm x 500mm
• Material: Mild Steel
• Capacity: 14 Ton/hour
• Automation Grade: Automatic
• Brand: ARS
• Control Type: PLC Controlled
• Phase: Three Phase
• Motor Power: 50 HP
• Chamber Size: 6 Cubic Meter

• Voltage: 220 V
• Country of Origin: Made in India
• Power Consumption: 2 HP
• Frequency: 50 Hz
• Item Code: LB-727

Manu make Brake press offers heavily welded frames which are stress relieved which is manufactured under stringent quality control. These machines are manufactured to deliver performance & quality with higher accuracy , better speed and minimum wear and tear

• Application: Aluminum Sections and Mild Steel
• Brand Name: ARS
• Automatic Grade: Manual
• Type: Hydraulic
• Material: MS / ALUMINIUM
• Weight: 5 - 5.5 Ton (Approx.)
• Max Load Capacity: More Than 100 Ton
• Operating Type: Manual Lever Operated
• Motor Power: 30 HP
• Model Name/Number: ARS 006 Export
• Control Type: Manual
• Baleable Material: Mild Steel,Aluminium,LMS
• Bale Weight: 30 - 50 KGS (IN MS)

• Brand Name: S.R. Sons
• Packaging Type: Box
• Voltage: 240 V
• Country of Origin: Made in India
• Automatic Grade: Semi Automatic
• Features: Sturdy design, Easy to handle, Perfect finish
• Material: Mild Steel
• Frequency: 50 Hz
• Phase: Single Phase

• Material: Metal
• Application: Scrap Processing Baler
• Brand Name: Jain Hydraulics Recycling
• Driven Type: Hydraulic
• Color: Grey
• Condition: New
• Automatic Grade: Fully Automatic
• Certification: CE Certified
• Type: Baling Machine
• Weight: 15tons
• Warranty: 1year
• After-Sales Service Provided: Yes
• Country of Origin: India
• Bale Size: 10 - 12
• Piston rods: Hardened
• Size: Chamber - 55 x 24 x 20 - 55 x 30 x 20
• Motor: LHP / ABB

• Automatic Grade: Automatic
• Bending Material: Sheet
• Power Source: Electric

We properly package our products using premium supplies and ultramodern technologies to make sure they endure shipping, handling, mechanical damages etc. We provide customized packaging solutions. With complete security system and with the help of the leading technologies, we make it possible to make payments online. Fret not! We ensure that all the details are kept confidential and are not shared with the third party. Features Precision engineered Dimensionally stable Impressive power

we are dealing Hydraulic Cot Mounting Machine

• Material: Mild Steel
• Condition: New
• Automatic Grade: Automatic
• Power Source: Electric
• Voltage: 220V
• Warranty: 1 Year
• Country of Origin: Made In India

Feature 3 modes for 3 works Use in Slipper cutting, Paper plate & scrubber packing  Adjustable pressure system  Inbuilt Moter

• Certification: CE Certified
• Voltage: 110V
• Condition: New
• Power: 1-3kw
• Warranty: 2years
• Application: In hydraulic system
• Weight: 100-200kg
• Automatic Grade: Automatic
• Driven Type: Hydraulic

• Brand Name: VILASH
• Material: santhaitic and japeneeze rubber

We are offering hydraulic piston seal.

Equipped with PLC, L.V.D.T depth control automatic photo sensor, the double action Hydraulic Press we offer is highly compact, rigid and has a space saving design. It is extensively applied for manufacturing stainless steel sinks, geysers, A.C., L.P.G. cylinders and other automobile draw components. This highly efficient quality is in accordance with latest trends and modern specialized designs to meet the needs of our valued customers.   How it works Since the hydraulic press works on the basis of Pascal's Law, its working is similar to the one of the hydraulic system. A hydraulic press consists of basic components used in a hydraulic system that includes the cylinder, pistons, the hydraulic pipes, etc.The working of this press is very simple. The system comprises of two cylinders, the fluid (usually oil) is poured in the cylinder having a small diameter. This cylinder is known as the slave cylinder. The piston in this cylinder is pushed so that it compresses the fluid in it that flows through a pipe into the larger cylinder. The larger cylinder is known as the master cylinder. The pressure is exerted on the larger cylinder and the piston in the master cylinder pushes the fluid back to the original cylinder. The force applied on the fluids by the smaller cylinder results in a larger force when pushed in the master cylinder. The hydraulic press is mostly used for industrial purposes where a large pressure is required for compressing metals into thin sheets. An industrial hydraulic press uses the material to be worked upon along with the help of the press plates to crush or punch the material into a thin sheet. Uses of Hydraulic PressA hydraulic press is used for almost all industrial purposes. But basically it is used for transforming metallic objects into sheets of metal. In other industries, it is used for the thinning of glass, making powders in case of the cosmetic industry and for forming the tablets for medical use. The other common uses of the hydraulic presses are as follows : For crushing cars : A hydraulic press is the heart of any car crushing system. In this process, a hydraulic motor applies a large pressure on the fluids into the cylinders. The fluid pressure makes the plates rise and with a large force, the plate is driven on the car thereby crushing it. Fat-free cocoa powder : While processing the cocoa beans, a liquid known as chocolate liquor is derived. Types of Hydraulic PressThere are many different types of hydraulic presses catering to the various requirements of industries. Some of them are as follows : Arbor presses : These presses are usually used when the work involved is not of a heavy- duty nature. These presses come in a variety of sizes and specifications. But compared to other hydraulic presses, they do not compress large amounts of pressure required to generate more output. Arbor presses are used in processes like piercing holes into metals, stamping, to flatten metals, tearing, marking inscriptions, etc. Laminating presses : Unlike other hydraulic presses that are operated automatically, these presses make use of manual labor. Laminating presses have two openings that are known as plates. One is used for heating whereas the other is used for cooling. This makes the lamination process comparatively faster. Through these presses, materials like polymer can be laminated onto paper and metal. In case of laminating presses, the plates are usually heated with oil.   Price : Approx. Rs 5 Lakh / Piece.

• Power source: Electric
• Power Consumption: 127 Hp
• Production Capacity: 50000-100000 Husks/Shift
• Automatic Grade: Automatic
• Horse Power: 50-150 HP
• Phase Type: Three Phase

• Production Capacity: 1500 Pair Per Hour
• Country of Origin: Made in India
• Voltage: 230 V
• Motor Power: 3 Hp
• Surface Finish: Powder Coating
• Motor Speed: 1440 rpm
• Load: 20 Ton