Hydraulic Machine Dealers in Shadipur, Delhi

This product is designed in complete conformity with international quality standards under the supervision of skilled professionals.

FULLY AUTOMATIC MACHINE SET 1 SET FULL DIE ANY SIZE 5 INCH TO 13 INCH SIZE PAPER PLATE SIZE :4 INCH TO 13 INCH SUITABLE PAPER WEIGHT :80GSM-500GSM OUTPUT :50,000 PIECES IN 10 HRS (DEPENDING ON SIZE OF THE PLATE) FANCY PLATE OUTPUT :24000 TO 48000 PIECES IN 10 HRS (DEPENDING ON THE GSM OF THE PAPER) TOTAL POWER :4 KW POWER SOURCE :SINGLE OR THREE PHASE(AS AVAILABLE)

• Max Force or Load: 10 Ton
• Usage: Industrial
• Material: Mild Steel
• Automation Grade: Automatic
• Phase: Single Phase
• Color: Blue
• Finishing: Color Coated
• Voltage: 240V
• Country of Origin: Made in India

Ranked among top suppliers of Electro Hydraulic Training Kit, we can provide the product at economical prices. Based in Delhi(India), we have garnered wide acclaim for making available quality and cost effective products to the lengths and breadths of the country.   Product Code: EKE 2108 Hydraulic Trainer Electrohydraulic Silent features software for simulation of Hydraulic circuits. We are manufacturing cylinders for industrial applications. Our cylinders can withstand pressure up to 160 Bar. Mobile and self-contained unit, only electrical connections are required. Simplicity of operation and designed for amateur use. Two pressure relief valves are provided in the system. One is provided inside the tank to increase the safety. Hoses can withstand pressure of 188 Bar. Test Pressure : 80 Bar ; Operating Pressure : 40 Bar. Realistic Industrial circuits are demonstrated. Special Bell housing is provided to maintain the Run out between Pump and Motor below 0.020mm. Special fixtures used for pipe bending and ferrule fitting arrangement. Specially designed front mounting plate. System is flushed with very high velocity (4 times the working pressure) by separate oil which maintains class A cleanliness of system. Lowest pressure drop in the system to avoid overheating. Cylinder are manufactured from precision honed tubes, hardened ground, hard chrome plated piston rods and imported quality seals

• Type: Hand Operated
• Certification: CE Certified
• Weight: 20-30kg
• Finshing: Paint Coated
• Material: Mild Steel

the PRO-60 HP Portable Hydraulic Punchers , double-action hydraulic puncher is an easy to handle, modern metal hole punch designed for punching holes with diameter up to 27mm. Intelligent control system and automatic load detection ensure safe and fast metal hole punching. Optional accessories enable customization of work place and improve punching efficiency..

• Color: Silver
• Production Capacity: 47-300 ton
• Approx Price: Rs 1.8 Lakh /Piece
• Durability: Sturdiness
• Weight: Light Weight
• Design: Appealing design
• Resistance: Crack resistance

We are associated with hydraulics since 40 years Our expertise has bestowed us with the capability to manufacture hydraulic presses suiting our customer�s requirements and specifications. We are in the line of manufacturing Hydraulic Presses to our customer's requirements. We are manufacturing the following type of Presses : Pillar Type'H' Type'C' Frame ( Open Throat )Closed body ( Window type )Channel frame type Our presses range from capacity 1 Tonne to 450 Tonnes. Our Presses can be operated both by hand and by our power packs, i.e., manually, to hydraulic presses, which are operated by our hydraulic power packs. Our presses range from a capacity of 1 tonne to 300 tonnes. Our team of highly qualified and skilled engineers has constantly come out with several innovations to ensure the efficiency of our hydraulic presses. The range of our hydraulic presses include 10 � 3000 KN1-9 daylightsPlaten size upto 2700 mm X 1500 mmControlled by computer aided electrical / electronic panelsHeating possible by steam / Oil / electric heaters. Custom � built to customer�s specifications, our hydraulic presses are also highly user friendly. Our strict adherence to Quality Standards ensures flawless performance, at all times. A lot of thought and research also goes into the process of designing our hydraulic presses resulting in a final aesthetically designed system, which blends seamlessly with any industrial environment.

GRIP JAW TYPE   Optional “open” (C type) or “semi open” (Y type) type grip jaw. Suitable for different test intensity.   Controller   Plug In ready to use PCI control card, suits all kinds of personal computer and main board. Full digital measure and control circuit provided with Load, displacement & deformation different measuring channel. Close loop control by simply software configuration.   EW Series machine, compared with a ball screw type electric mechanical UTM, is adopting oil hydraulic power to push the piston in the oil cylinder to provide loading force. Therefore it is very suitable for making test to different metal or nonmetal materials under high toughness and hardness against extreme big loading force. By using oil pressure transducer and photoelectric encoder, the computer is timely collecting the testing parameters like loading force, stroke etc.The servo system will provide on line close loop control and constant parameters control. The test software is able to create customized testing methods and setup testing report in only a few steps. EW series is widely used in different inspection department, engineering area, universities and institutes.

• Machine Capacity: 4000 kgs.
• Pressure: 6-8 kgs/cm2
• Lifting Height: 1850 mm
• Width: 1960 mm
• Power Supply: 380V-50Hz, 3 Phase

Model : GLADIATOR Salient Features :- Single repair station for wheel alignment, balancing , tyre rotation and routine service of Cars. Lifting capacity - 4.0 tons. Lifting height - 1.8 meters. Second lifting height - 450 mm. Concealed in ground installation. Optional - Pneumatic Wheel Opener, Tyre Inflator & Oil Dispenser attachments.

We offer h- frame hydraulic press. we are are engaged in manufacturing and supplying h-frame hydraulic press. The h-frame hydraulic press is rigidly constructed by our dexterous team who make use of latest technology in an efficient manner. The h-frame hydraulic press, we offer, is much demanded by varied industries for meeting diverse requirements in a qualitative manner. We offer the h-frame hydraulic press at reasonable price. features of our h-frame hydraulic press compact designsturdy constructionoperated with the latest electronic control (plc)inbuilt advanced featureseasy to install and operate our h-frame hydraulic press is used for punching bending assembling riveting straightening.

• Brand Name: Narendra
• Model: NHF-250
• Capacity: 250 Ton
• Tonnage Rating Point: 5 mm
• Stroke Length: 150 mm
• Strokes Per Minute: 110 SPM
• Die Height: 400 mm (S.D.A.U.)
• Adjustment of RAM: 08 mm
• Bloster Area: 600 x 700 (LR x FB)
• Slide Area: 580 x 600 (LR x FB)
• Side Window: 320 x 500 mm
• Lower Ejector: 2 x 40 (TON x MM) (Table)
• Upper Ejector: 1 x 20 (TON x MM) (Slide)
• Main Motor: 18.5 Kw
• Air Pressure: 4-5 kg/cm Square
• Slide Adjustment Motorised: 0.75 Kw
• Lubrication Automatic: Grease

• Brand Name: Prime Engineers
• Weight: 3 ton
• Shot Force: 9-30Ton
• Ejecting Stroke: 100mm

• Capacity: up to 10 ton
• Material: Mild Steel
• Brand Name: Venus
• Color: Blue
• Voltage: 280 V
• Country of Origin: Made in India
• Usage/Application: Industrial
• Automation Grade: Semi Automatic
• Frequency: 50-60 Hz
• Packaging Type: Wooden Box
• Surface Finishing: Color Coated
• Phase: Single Phase
• Motor Power: 3.5 HP

• Brand Name: BI-515
• Capacity: 0-15mtr/min
• Minimum Order Quantity: 1 Unit

Models are available in a range of sizes from 4 mm to 25 mm sheet thickness. Features: welded steel frame providing maximum rigidity and cutting accuracy; rapid blade gap adjustment mechanism; compact, low maintenance and reliable hydraulic unit; and hydraulic hold downs are automatically adjustable for pressure according to sheet thickness. Hydraulic Power Pack - Hydraulic system is mounted at top at rear side of machine. Valves are mounted on a compact manifold block minimizing piping and chances of leakages. Cylinders: Cylinders are precisely honed and are fitted with hard-chromed piston rod with best quality sealing elements. Cylinders are connected with upper beam (cutting beam). Hydraulic Hold Down: Hydraulic hold down pads holds the sheet securely to avoid slipping & bowing resulting in clean square cut. Hold down units is provided for better clamping while cutting narrow strips. Stroke: The same is adjusted with help of stroke setting rod & limit switches. Blade Clearance: blade clearance can be adjusted manually by lever on each side of machine with calibration of clearance suitable for thickness. Back gauge: Hand operated back gauges are provided.

All those who are looking for a dependable firm providing excellent and efficient High Production Deep Drawing Press can get in touch with us! From India, we are furnishing standard as well as tailored requirements of our valued patrons, globally. Our Drawing Press is comprehensively in demand owing to its attributes of sturdy make, high durability; easy installation and low maintenance.   Main Frame : Prakash Presses with robust RING FRAME construction gives highest rigidity minimizing deflection of the frame to almost zero thereby giving incredible tools life & part quality. Oil dip gears provided to enhance press life & low sound level. No open parts for the highest safety of operator. Slow Draw Speed : Three Times Slow Draw Speeds Compared to Faster Return Speed Ensures Good Draw Part Quality with Minimum Rejection & Still Faster Production.Auto Gauge Variation Control : Auto gauge variation control system draws blanks even with thickness variation minimizing rejections. Motorised blank holders reduce die setting time unbelievably just at the touch of a single button without any manual settings by operator. Auto Blank Feeder : Servo & pneumatic controlled auto blank feeder feeds 2mm & above thick (straight) blanks directly on to the die otherwise manual feeding on the feeder is also possible. Improves metal flow times by keeping material in the work portion by nearly 300% longer period. Slower velocity in the tool improves part finish. Faster production speeds without increased forming speed thanks to faster slide return rate. Lower impact, shock, noise and vibration improves die, press and other equipment life. Quick Auto Ejection System : This system facilitates operator to remove drawn Components earlier for highest safety. Improves metal flow times by keeping material in the work portion by nearly 300% longer period. Slower velocity in the tool improves part finish. Faster production speeds without increased forming speed thanks to faster slide return rate. Lower impact, shock, noise and vibration improves die, press and other equipment life. Standard Features : Automatic blank feeder Automatic lubrication system Pneumatic clutch Electrical control panel Infrared hand safety curtain. Maintenance & lubrication free bushes/bearings Foundation pads Auto gauge variation control system Motorised blank holder Motorised draw punch Optional Features : Auto draw compound spray nozzles Hydraulic tool clamping (Moving) extra bloster plate Rear convey or system

In compliance with the demands of the market, we bring forth custom manufactured Hydraulic Guillotine Shearing Machines. These Hydraulic Guillotine Shearing Machines are manufactured with precision to fit with all types of precision sheet and plate working applications. Manufactured with high functionality features, our Hydraulic Guillotine Shearing Machines meet the demands of various industries. Specialty High efficiency Long service life Smooth operation Minimal maintenance Features & Accessories Rugged structure as per the international standards Moving beam synchronized by differential cylinders Hardened roller guiding beam for constant blade gap Rake angle adjustable to suit thickness and material Blade gap adjusted with levers for clean cuts Sheets clamped hydraulically before cut starts Shearing-clamping forces adjustable to suit job Blades premium HCHCr, four usable edges Cutting length and position adjustable for short job Beam returns on releasing foot switch for smaller cuts Cutting area illuminated for clear view of blades First two hold-down spaced closer at both ends Front gauging with stopes, scale on squaring arm Sheet supports 600mm long help support long plates Ramp on rear slides out cut sheets outside shear area Back gauge moves away to avoid trapping of cut sheet Foot switch movable for operation from safe position Finger safety guard with clear view of lighted cutting area Dependable brands of hydraulics, and electricals Efficient compact power-pack with minimal piping Electricals neatly wired-labelled for trouble shooting Attributes Ranke angle adjustable for material thickness. Blade gap easily adjustable for clean cuts. All blades HCHCr with 4 usable edges. Extra capacity to cut inconsistent material, Beam guided, synchoronized for constant gap. Firm clamping of plates before cut starts and easier feeding gauging retrieval of sheets. Shearing at constant speed with cutting (rake) angle set to suit material, thickness minimizes the distortion of cut sheets. This facilitates quality in downstream operations viz. pressing, punching, bending and drawing. Shearing at correct blade gap with sheets firmly gripped help get clean burr-free edges and avoids re-working during welding and assembly.

We offer fully integrated and automated Briquette Plants & Products. Highlights of our technology are. Lower electricity consumption. Ability to run round the clock. Lower Downtime. Low cost of wear parts and consumables. Dust Free operations. Flexibility to suit all Raw Materials. Minimum manpower requirement.

5 - point double toggle system Mechanical and electrical safety devices Low pressure mould protection Multi-stage control of pressure, speed and position of mold openclose Fast mould clamping with differential device Robust casting construction with strengthened tie bar for maximum service life and best molding results Automatic mould height adjustment Variable mode of ejector movement Automatic central lubrication

• Voltage: 440
• Automatic Grade: Semi-Automatic
• Rated Power: 5 HP
• Material To Be Cut: Iron
• Automation Grade: Semi-Automatic
• Brand Name: India
• Phase: 3

We are reputed company engaged in manufacturing, exporting, and supplying a wide range of Hydraulic Shaft made from optimum quality raw materials. The Hydraulic Shaft which we offer to our esteemed clients is well known for its smooth functioning and flawless working abilities. Our Hydraulic Shafts are highly used to provide support for up and down the sections. Attributes High strengthLong service lifeHigh qualityHigh grade raw materialCompetitive unit priceExcellent performance

• Dimension: 1.03x11.6x1.01m
• Max. book thickness: 500mm

Hydraulic book strapping machine is suitable for book block pressing and strapping, widely used in the post-press processing.Hydraulic book strapping machine is suitable for book block pressing and strapping, widely used in the post-press processing. The machine has the features of stable operation, low noise, economic; It is intersested by binding factories.

• Paper Material: PE Coated Paper
• Material: Mild Steel
• Brand Name: JV Engineering Works
• Capacity: 80 Piece per Min
• Voltage: 220 V
• Automatic Grade: Semi Automatic
• Phase: Single
• Surface Finishing: Paint Coated
• Weight of Machine: 500 kg
• Motor: 3 HP
• No. of Die: 2

We offer fully integrated and automated Briquette Plants & Products. Highlights of our technology are. Lower electricity consumption. Ability to run round the clock. Lower Downtime. Low cost of wear parts and consumables. Dust Free operations. Flexibility to suit all Raw Materials. Minimum manpower requirement.

• white: white

Hydraulic 5-level pinch gauge is available in clinic mode (gauge facing clinician) and feedback mode (gauge facing patient). Adjustable handle fits all size hands for accurate and repeatable pinch measurements. 5-position strength test protocols (MVE and MMVE) now can be used for pinch measurements. Easy to adjust paddle accommodates to any size hand (other pinch gauges only have one pinch width). Pinch width without paddle is the same width as standard pinch gauges, both mechanical and hydraulic. 5 pinch positions permits MVE and MMVE protocols to be used with tip, palmar and key tests.