Impact Testers Dealers in New Rohtak Road, Delhi

• Brand Name: Steco
• Usage: Crushing Value
• Automation Grade: Manual
• Capacity: 500 kN
• Test Sieve: 2.36 mm, 10mm, 12.5mm and 14 mm
• Electronic Balance: 3 kg. X 1 gm

  General Specifications: Consists of Case hardened Mild steel cylindrical container of 150 mm dia 0.5mm x 130 mm to 140mm high with base plate 200 to 230mm square x 6mm thick A plunger of 148mm 0.5mm dia x 100 to 115mm high. All parts directly coming in to contact with the specimen during the test are made of mild steel duly case hardened. Supplied complete with tamping rod, 16mm dia x 600mm long, one end rounded. Optional Accessories: The following accessories are not part of the standard supply and are supplied at an extra cost. Cylindrical Metal measure 11.5cm dia x 18cm height with handle. Electronic Balance 3 kg. X 1 gm Compression Testing Machine Capacity : 500 kN Test Sieve 2.36 mm, 10mm, 12.5mm and 14m

The pendulum is mounted on antifriction bearings. It has two starting positions, the upper one for Charpy and the lower one for Izod testing. One release, the pendulum swings down to break the specimen and the energy absorbed in doing so is measured as the difference between the height of drop before rupture and the height of rise after rupture of the test specimen and is read from the position of maximum pointer on the dial scale.

• Type: Izod Impact Testing Machine
• Power: Electronic
• Usage: Impact Testing Machine
• Application: plastic impact test
• Packaging Type: Corrugated Box
• Certification: Corrugated Box

• Brand Name: U Test
• Country of Origin: India
• Type: Aggregate Crushing Value Apparatus
• Shape: Round
• Thickness: 0-10mm
• Length: 0-10cm
• Color: Blue

For determining Stripping Value of bitumenous mixes having aggregate size 1.0mm to 75 microns.A circular tray rotates in a vertical plane at a rate of approximately 100 r.p.m. by an eletrical geared motor. 4 bottles of approximately 400 cc are mounted on this circular tray at an angle of 90° to each other with their mouths towards centre of the tray.A time switch is provided. Suitable for operation on volts A.C. single phase.

We are offering pendulum impact testing machines. Manufactured under the supervision of our expert and skilled associates, who are having years of experience in this domain, we are able of presenting our clients pendulum impact testing machines. These machines works on pendulum principle and are highly suitable for conducting charpy and izod impact tests on various material with minimum energy consumption. features: high performance seamless finish precisely-engineered available with safety guard for the operator initial potential energy for charpy is 300 joules and for izod is 170 joules with a l.c. Of 2 joules (for analogue models) and resolution of 0.5 joules (for digital model) pendulum drop angle for charpy is 140° and for izod is 90° astm impact testing machine is also supplied, which conforms to e-23 astm standard also available with gauges, tongs, sub-zero bath, templates, u and v notch milling cutter accuracy of these machines conforms to is: 3766-2003, is:1598-1977, is:1757-1999, is:1499- 2003, bs:131-part-i, ii, iii, iv and bs en-10045-1993

• Model: VK-DWT-200
• Maximum energy (J): 20000
• Hardness of tup nose: HRC5862
• Tup mass (kg): 630
• Weight mass accuracy: +-0.5%

We are leading manufacturer, Supplier & Exporter of Aggregate Impact Tester. We manufacture Aggregate Impact Tester as per the set market standards. Aggregate Impact Tester manufactured by us generally used for determining the aggregate impact value.

The Aggregate Crushing Value (ACV) test set provides a relative measure of the resistance of an aggregate to crushing under a gradually applied compressive load. Each set consists of steel cylinder, plunger, base plate, cylindrical measure and tamping rod. All parts of the apparatus are powder coated or galvanized steel, heat treated and ground before manufacturing to make it durable and reliable.   Specification: Consists of M.S. Cylindrical Container 150mm +/-0.5mm dia x 130mm to 140mm high with base plate 200 to 230mm/sqr x 6mm thick. A Plunger of 148mm +/-0.5mm dia x 100 to 115mm high. Supplied complete with Tamping Rod, 16mm dia x 600mm long, both ends rounded, 1 no. Metal Measure 115+/- 0.5mm dia x 180 +/- 0.5mm high.

The aggregate crushing value provides a relative measure of the resistance of an aggregate to crushing under a gradually applied compressive load. The oven dried and accurately weighed aggregates are subjected to crushing test on compression testing machine and weight of the resultant fines passing the specified IS sieve to the total weight of the sample expressed a s a percentage is defined as Aggregate Crushing Value. The apparatus is available in three size 75mm dia for 1/8” to ¼” size aggregate, 150mm dia for 3/8” to ¾” aggregate (standard) and 300mm dia for 1” to 2” aggregate.  Consists of Case hardened Mild steel cylindrical container of 150mm dia + 0.5mm x 130mm to 140mm high with base plate 200 to 230mm square x 6mm thick. A plunger of 148mm + 0.5mm dia x 100 to 115mm high. All parts directly coming in to contact with the specimen during the test are made of mild steel duly case hardened. Supplied complete with tamping rod, 16mm dia x 600mm long, one end rounded. The following accessories are not part of the standard supply and are supplied at an extra cost. ·        Cylindrical Metal measure 11.5cm dia x 18cm height with handle. ·        Electronic Balance 3 kg. X 1 gm ·        Compression Testing Machine Capacity : 500 kN       ·      Test Sieve 2.36mm, 10mm, 12.5mm and 14m

For measuring the resistance of aggregate to crushing. It consists of M.S. cylinderical container 150mm ± 0.5mm dia x 130mm to 140mm height with base plate 200 to 230mm/sqr x 6mm thick. Comes with a plinger of 148mm ± 0.5mm dia x 100 to 115 mm height. Supplied complete with tamping rod, 16mm dia x 600mm long, one end rounded. Also comes with one metal measure 115 ± 0.5mm dia x 180 ± 0.5mm height.

Tubular Impact Tester, subsonic wind tunnel, toxicity test apparatus

Pendulum Impact Testing Machines, Hardness Software, Abrasive Cut Off Wheels

tubular