Impact Testing Machine Dealers in Delhi

We are offering impact testing machine.innovative impact testing machine is specifically designed for conducting izod & charpy test. Impact testing machine is suitable for testing raw material specimen as well as finished components. components & working of impact testing machine pendulum of the machine is mounted on antifriction bearings contains two starting positions, the upper one for charpy and the lower one for izod testing the pendulum on release swings down to break the specimen and the power absorbed in doing so is calculated as the variation between the height of drop before rupture & height of raise after rupture of the test specimen the output is read from the maximum pointer on the dial scale offered with self centering tong v - notch milling cutter u - notch milling cutter caliper gauge for checking v notch for izod & charpy depth notch gauge including v & u notch, angle & radius controls of pendulum the pendulum is mounted on antifriction bearings. It has two starting positions, the upper one for charpy & the lower one for izod testing. On release, the pendulum swings down to brake the specimen and the energy absorbed in doing so is measured as the difference between the height of drop before rupture and the height of rise after rupture of the test specimen and is read from the maximum pointer position on the dial scale. (it is read on digital readout in case of electronic machines.) there are two strikers and one combined support available for lifting in to the pendulum and on to the base of the machine for izod, charpy test, changing from one striker to another is achieved simply by fixing the new striker into it's position. charpy test : the charpy test piece rests on alloy support anvils, fitted on the base of the machine rigidly held in position by allen screws. End stopper is provided for quickly and accurately locating the test piece centrally between the supports. izod test : the izod test is clamped vertically in izod support fitted on the base of the machine. The support is provided with a machined vertical groove to suit the test piece size. The front clamp piece and the allen screw enable clamping of the test piece in correct height with the help of izod setting gauge supplied.

Charpy impact testing involves striking a standard notched specimen with a controlled weight pendulum swung from a set height. The standard Charpy-V notch specimen is 55mm long, 10mm square and has a 2mm deep notch with a tip radius of 0.25mm machined on one face. The specimen is supported at its two ends on an anvil and struck on the opposite face to the notch by the pendulum. The amount of energy absorbed in fracturing the test-piece is measured and this gives an indication of the notch toughness of the test material. The pendulum swings through during the test, the height of the swing being a measure of the amount of energy absorbed in fracturing the specimen. Conventionally, three specimens are tested at any one temperature and the results averaged. Charpy tests show whether a metal can be classified as being either brittle or ductile. This is particularly useful for ferritic steels that show a ductile to brittle transition with decreasing temperature. A brittle metal will absorb a small amount of energy when impact tested, a tough ductile metal absorbs a large amount of energy. The appearance of a fracture surface also gives information about the type of fracture that has occurred; a brittle fracture is bright and crystalline, a ductile fracture is dull and fibrous. The percentage crystallinity is determined by making a judgement of the amount of crystalline or brittle fracture on the surface of the broken specimen, and is a measure of the amount of brittle fracture.

• Maximum Capacity: 300 J / 170 J
• Minimum Scale Graduation: 0.5 J
• Overall Size (Approx.): 1.65 m x 0.45 mx, 1.65 m (H)
• Net Weight (Approx.): 375 Kg.

Controls of Pendulum The Pendulum supported in the starting positions is by a self resetting latch. The release mechanism is operated by lever. The Pendulum release latch is operated only when this lever is operated. Strikers & Supporters There are strikers & one combined support available for fitting into the Pendulum & on to the base of the machine for Izod, Charpy test. Changing from one striker to another is achieved simply by fixing the new striker into its position.   Specification    

• Size: W800*1300*1000
• Type: Bump Test Machine
• Certification: ISO 9001:2008
• Application: Battery
• Weight: 800kg
• Color: Grey
• Country of Origin: CN
• Brand Name: ASLI
• pulse acceleration( m/s2): 50

Mechanical Shock Test Machine/ Impact Shock Testing Equipment Manufacturer   Aapplication: Mechanical Shock Test Machine is designed for measuring and ensure shock performance of products and packages. It can do normal shock test with half sine wave, square wave, sawtooth wave etc., simulate products under real environment shock conditions, thus improve and perfect products package structure.   Model NO. :MS-100 Loading Method: Dynamic Load Display: computer Control:Computer Control Power Source:AC380V Oil Cylinder Position:Under Max. Loading (Kg):50~800 Pulse Acceleration ( M/S2):50~1200 Pulse Width (Ms):20~3 Frequency (Times /Min):10~80 Max. Dropped Height (mm):60 Pulse Type:Half Sine Wave Protection Device:Door Protection   Features 1.mechanical shock test system with Windows operating system, easy for operation, operator only need to type into testing data, system will automatic configurate parameters and control machine, finish shock test accurately . 2. With anti re-shock brake device, shock table fall freely, when shock wave pad rebound, hydraulic brake piston impact thus shock table braking ,avoid secondary shock and achieve accurate shock data. 3.With effective vibration damping device; for large shock tester, when do shock testing it has large instantaneous impact force, this device largely reduced the shock impact to the floor, small than 350×350mm ones no need special foundation, easy for installation  If you need more information about Mechanical Shock Test Machine/ Impact Shock Testing Equipment Manufacturer, please feel free to contact us.

• Brand Name: Steco
• Automation Grade: Manual
• Material: Mild Steel
• Application: Tensile Strength Testing
• Test Method: IS : 1757-1973 and IS :1499-1077 and IS : 1598-1977

• Power: Without electricity
• Weight: 30kg
• Application: Hard plastic
• Size: 550*400*690mm
• Test Angle: 150 degree

Charpy Impact Testing Machine The Charpy impact testing machine we offer is designed to conduct Charpy and Izod tests. Our machines come with the pendulum mounted on the anti friction bearings. The machine model comes with two starting positions, the upper one for the Charpy tests and the lower one for the Izod testing. The machine is designed to read the specimen from the maximum pointer position on the dial scale. When you are using the machine, you can change from one striker to another simply by fixing the new striker into its position. Most of our machines and instruments are developed based on the national as well as international standards. Therefore, you will obtain the best quality products for the money you spend. Before you order the Charpy impact testing machine from our store, you will find all the specifications and details about the machine. The model provided by our company comes with interchangeable strikers and front guard for safety. The common specimen holder is also provided with the model for Charpy and Izod test. Salient features: • 2J scale graduation • Pendulum drop angle of 140 degrees for Charpy test and 90 degrees for Izod test • Pendulum effective weight of 21.300 Kg for IZOD test and 21.400 Kg for Charpy test • Striking velocity of the pendulum is 3.857 m/sec for Izod test and 2.45 m/sec for Charpy test • Pendulum impact energy is 168 J for IZOD test and 300J for Charpy test • Scale graduation of 2J • Maximum permissible loss by friction 0.50% of impact energy

• Brand Name: SRI
• Automation Grade: Manual
• Material: Mild Steel
• Display Type: Digital and Analog
• Warranty: 1year
• Model Name/Number: SRI ITM-30
• Capacity: 30 Jule

• Voltage: 220 V
• Frequency: 50 Hz
• Material: Stainless Steel
• Brand: Enkay Enterprises
• Temperature: - 452 Deg.F to 500 Deg.F

• Automation Grade: Automatic
• Product Type: Impact Testing Machine
• Brand: Star Scientific Solution
• Country of Origin: Made in India

• Brand Name: Technogroovy
• Power: Electronic
• Model Number: TG 105
• Place of Origin: India

This Pendulum impact Tester is designed for conducting CHARPY, IZOD AND IMPACT Test. The test Method confirm to IS: 1973, and IS 1499-1977, and BS: 131 Part 2 & 3-1972 IS: 1598-1977, BS: 131 Part I- 1972 The impact energy absorbed by the specimen during rupture is measured as the difference between the height of drop before rupture and the height of rise after rupture of the test specimen and is read on the dial scale.

We are a renowned name in the field of manufacturing of Pendulum Impact Testing Machine. We offer Pendulum Impact Testing Machine that is designed for conducting Izod, Impact Tension and Charpy test. Pendulum Impact Testing Machine manufacture by us is commonly use by many industry. We offer Pendulum Impact Testing Machine to our customers as per the leading market prices.

The company is considered as one of the prominent Manufacturers, Exporters and Suppliers of Pendulum Impact Testing Machine. Our Pendulum Impact Testing Machine is used for conducting Charpy, 1Z0D and Impact Tension tests. These test methods adhere to IS 1499-959, IS 1757-1961 and BS 131 part 2 % 3, IS 1598-1960, BS 131 (Part 1) and ASTM E 32-47T. The variation between the height of the drop before rupture and height of the rise after rupture illustrates the impact of energy absorbed by the Pendulum Impact Testing Machine and the result is reflected on the dial scale.   Features Of Our Pendulum Impact Testing Machine Release of Pendulum by Hand operationSafety guards for ProtectionBraking Arrangement provided to arrest the swing of pendulum after specimen rupture

Innovative  Impact Testing Machine is specifically designed for conducting Izod & Charpy Test. Impact Testing Machine is suitable for testing raw material specimen as well as finished components. Components & Working Of Impact Testing Machine   Pendulum of the machine is mounted on antifriction bearings Contains two starting positions, the upper one for Charpy and the lower one for Izod testing The Pendulum on release swings down to break the specimen and the power absorbed in doing so is calculated as the variation between the height of drop before rupture & height of raise after rupture of the test specimen The output is read from the maximum pointer on the dial scale Offered With Self centering tong V - notch milling cutter U - notch milling cutter Caliper gauge for checking V notch for Izod & Charpy Depth notch gauge including V & U notch, angle & radius

Designed for conducting Izod & Charpy Test. Specs: CHARPY TEST IZOD TEST Pendulum drop angle 140 deg. 85deg. Pend. Effective wt. 20.996kg 22.059kg Striking Velocity 5.3466m/sec 3.587m/sec Impact energy 300J 164J Min. scale graduation 2 J 2 J Distance of axis of P. Rot 825mm 825mm Max. permissible loss 0.5%. Striking edge angle 30 deg. 75 deg. Radius of Curvature 2.25mm 0.75mm Width 18mm  

Impact Tester Model JIT - 30 is designed for conducting CHARPY, IZOD ans IMPACT TENSION tests. The test methods confirm to IS 1757-1761, IS : 1499-1959 and BS : 131:131 : Part 2 & 3, IS:1598-1960, BS : 131 part I and ASTM E 32-47T. The impact energy absorbed by the specimen during rupture is measured as the difference between the height of drop before rupture and the height of rise after rupture of the test specimen and is read on the dial scale.