Industrial Control System Dealers in Sunder Vihar, Delhi

We are engaged in manufacturing and supplying of Control Desk in India.

• Frequency: 50Hz
• Phase: Double Phase
• IP Rating: IP45
• Warranty: 6 Months
• Rated Current: 1250A
• Rated Voltage: 12kV

AMF Panels find wide application in varied industries and are used when the main electricity supply fails. They are automatic panels that changeover to a stand by generator on the failure of the main electricity supply and automatically changes back to stop the generator when the main supply is restored. These panels are precisely engineered and designed to meet the maximum requirements of the clients.

Features Micro-controller BasedSupports 2 Wire International Standard Smoke Detectors.10 Zone Fire Panel.Facility to Attach Speech Dialer.Panel Can Be Integrated with Standard Industry Products.39 Individual Leds Indicate Status.Solid Metal Box with Transparent Cover.Cabinet Closed with a Lock and Key to Restrict the Access.Individual Zone Indication in Case of Fire.Individual Zone Indication in Case of Short Zone.Individual Zone Indication in Case of Open Zone.Common Tamper Led for Open or Short in Any Zone.Panel Can Be Programmed By a User Code.User Programmable 3-7 Digit Code.Panel Can Be Armed or Disarmed Through Code or a Dedicated Key.Any Zone Can Be Omitted.Manual Call Points Can Be Operated Even When Some Detectors have Been removed.12 Event Fire Memory Log.Sounders Start Automatically When Fire is Detected.Sounder Time Can Be Programmed from 2 to 20 Minutes.Single Dedicated Key to Arm the Panel.Single Dedicated Key to Manually Start Sounders.Single Dedicated K Ey for Zone Led Test.Single Dedicated Key to Switch Off the Sounders and Disarm the Panel.Single Dedicated Key for Drill Exercise.Non-volatile Memory.Two Sounder Outputs, Each Can Switch 1 Amp.Higher Power Sounders Can Be Attached Through An Inbuilt Relay.Sealed Maintenance Free Battery Backed 24v Power Supply (provision for Battery).Built in Battery ChargerBattery Space Provided Within the Panel with Plug in Connectors.Low Battery IndicatorBlown Fuse Indicator for Dc Fuse.Mains Power Indicator.Aesthetically Designed.

We bring forth Control Panel Components of the superlative quality for the countrywide market. We are enlisted with the chief Manufacturers and Suppliers of Control Panel Components in Delhi. We fabricate the components by giving painstaking attention to even the minutest details. And the material used in their fabrication is of the best quality. Plus, we can entertain the demand for customization. Count on us!   Range : Chillers / Chill Blocks    Bus Bar Link    SS Stack Assembly : Pressure Plate, Pressure rods, Chillers

• Material: Steel
• Shape: Rectangle
• Application: Industries
• Color: Grey
• Feature: Excellent Reliabiale, High Mechanical Strength, Maintenance Free
• Phase: Double Phase, Single Phase, Tripple Phase

Before making the final dispatch, our entire lot is carefully stored in our capacious warehouse under the administration of experts. Thus, there are minimal chances of defects at buyer's end. Get in touch with us for placing small as well as bulk orders, timely deliveries will be straight to your doorstep! Features : Precise design Easy to install Strong construction

We manufacture all kinds of Plastic control cables parts.  

• Material: Metal
• Shape: Rectangle
• Application: Industries
• Frequency: 50Hz
• Power Source: Electrical
• Feature: Dust Proof, Light Weight

We are counted amidst the prominent Electric Panel Board manufacturers, exporters, and suppliers in india. All kinds of electric panel boards are available with us, in order to meet the specific requirements of the clients. The electric panel board ensures optimum safety and higher performance. Moreover, our electric panel board is designed as per the standards of the electric industry.   Appreciated For High durability Sturdy construction Excellent performance Advanced features

Used in panel boards spare parts voltage stabilizer and transformers quality product affordable rate superior quality.

• Frequency Range: 50-60 Hz
• Mounting Type: Panel
• Insulation: PVC
• Max Temperature: 70 - 85 deg C
• Packaging type: Box
• Power Source: Hand Operated

Customers can avail rom us Electrical Distribution Panel that is precisely engineered by the experienced professionals. Electrical Distribution Panel is used in homes, offices and other building for distributing electric power to the entire building. It is connected to the meter. The Electrical Distribution Panel provides a protective fuse or circuit breaker for each circuit. Further, Electrical Distribution Panel is available in different specifications and can be customized as well. Appreciated for : Supreme quality EfficiencyLong serving life

We offer customized solutions for trouble free distribution of electric power. Panel box is a power distribution board with MCCBs as incoming and outgoing switching-cum-protective devices, for distribution of power to various loads as per the requirements of the system. The modular construction of panel box renders the customary panel building redundant by virtue of compactness, reduced cost and short delivery time coupled with reliability of the various modular units. All units are fabricated using sheet steel of 1.6mm and are epoxy powder coated to give a superior finish.

We are offering plc panel . doon engineers & consultants offers a well designed plc panel all across the country. These plc panels are durable and long lasting in nature. We also offer customized plc panel as per the special design, dimensions and specifications of the clients. The plc panel are made available at reasonable prices. attributes perfect structureeasy to installhigh efficiencylow on power consumption

We provide an exclusive range of Glow Sign Boards that is extensively used by the malls, shops and various other sectors for the promotional purposes. We have firmly positioned ourselves as one of the flourishing Advertising Glow Sign Boards Manufacturers based in India. Commercial Glow Sign Boards offered by us are available with lights that enhance their appeal. Furthermore, we also offer installation services of these boards. Our Commercial Glow Sign Boards are manufactured using bright and fade resistant colors along with modern graphics. Special Attributes of our Glowing Sign Boards Appeal enhancing lightsShock proofPrecisely designedConsists of bright colorsFade resistant colors Used by MallsShopsHospitalsBanksCommercial AdvertisersTheatres, etc.

Suitable for Automatic Door Lift. Door safety sensor interface. Speed Up to 1.5 m/s for open-loop, 2.2m/s close loop. Two tier spped control logic to avoid over travelling due to failure of floor position sensor. Auto Shut Down case of failure of door acknowledge I/P's. Door Control O/P's multi Speed with door status acknowledge I/P's. Single Speed Manual Door Controller Supports upto 16 landing with DOL Wye/Wye-Delta starar for single speed lift. Supports simple gate lock contract & pre gate look configuration. Electronic single phasing/reverse preventer. Speed upto 0.7 m/s for open-loop. Multi Beam Door Sensor The installer must align the RX and TX sensor units correctly for smooth and reliable operation. How to mount and align the units correctly for center openings doors? Check and adujst alignment of car doors. Car doors must be vertically plumb and in line with earch other. Follow the lift manufacturer's guidelines if you need to adjust them. Mark positioning of D200 sensor units on car doors. Units must be in horizontal and vertical alignment (if necessary, use packing to align the units). Leave a gap of 1/4" between bottom units and car sill. Leave a minimum gap 1/4" between units when the doors are fully closed. After installing the sensor units check alignment and adjust with packing if necessary.

We are the manufacturers, suppliers and service providers of one of the best quality AC Drive , PLC, DCS Automation Panels since past several years. These Panels which we are manufacturing are equipped with best machinery needed to control and regulate the many ongoing industrial functions at a time. These are made of extremely robust material with international standards to provide it a sturdy strength to last long and provide a prolonged service life. The panel is vertical switching board fitted with firm and clocked regulators and touch push buttons. These are 100% insulated and are recommended safe by the quality inspectors before releasing it to our clients. We offer our clients an high quality range of AC Drive Control Panel, which are manufactured from best quality switchgears and other materia. These AC Drive Control Panel are customized as per our clients specifications. Our AC Drive Control Panels are widely known for durability and quality and can be availed at industrial leading price. Depends on the Client requirement, we suggest the Quality brands from ABB/Siemens/Mitsubishi Electric/ Allan Bradley/Delta/YASKAWA/L&T/DANFOSS etc. Also we provide an efficient commissioning & after sales support through out India & abroad. APPLICATIONS : Rubber Processing Units, Plastic Processing Units, Extruder AC Drive Panel, Conveyor Belt Panel, Winder Speed Control, Calendar Machine Control Panel, Machine Automation, Factory Automation, Pumps, Fans, Exhaust & Blowers, Line synchronization of multiple VFDs in a production Line, Closed loop Applications with Encoder Feedback, Sensorless Vector Control, Torque Control Applications, Precise speed control, Dancer/Load Cell, Level Control, Pressure/Flow Control Applications and Amusement Rides etc. FEATURES :- Dust & Vermin Proof - Cooling Fan/A.C. Attachment- Spacious for Maintenance Free- Wiring Diagram Fixing at Panel Door- Proper Space for Cable Termination- Easy for Ready to Use- AC Drives from 0.25 HP to 300 HP- Speed/Amp./Rpm Display At Panel- High torque/Smooth Variation of Speed

We are the leading manufacturer, supplier, and exporter of Distribution Boards. Our Distribution Board is engineered by expert professionals, who strictly abide by the contemporary trends. We adopt the best quality of raw materials, metals, and other components, for manufacturing Distribution Boards. They are extensively used for domestic and commercial purposes. Our Distribution Boards are well-applauded for their excellent performance and long life span.

  PYROTECH offer a wide range of Control Panels for various industries/applications and custom built panels for specific requirements. These are precision fabricated in CRCA sheet enclosures, well engineered and aesthetically designed. It meets diverse technical requirements under stringent and varying site conditions, and utilize floor space more efficiently. High quality powder paint is sprayed and baked at high temperature. The products include: Instrumentation Panels, Control Desks, Electrical Panels(Motor Control Centres, Power Factor Improvement Panels, Ligthting Panels and Starter Panels), PLC panels for Plastic, Printing, Hydraulic, Kneader machines, Mixing Mill and many more.

We are offering auto transformer starter motor starting auto transformers for on-line starting of motors are simple and economical. Offering maximum starting acceleration and torque. Auto transformer overcomes the two major limitations of on-line starters high starting current and high starting torque. why auto transformer starter used? full voltage starting of motors can produce voltage flicker, mechanical stress to gear boxes or belt drive systems and create pressure surges or water hammer in pumping applications. Starting a motor at reduced voltage can help reduce or overcome these problems. If the load cannot be accelerated to full speed using full voltage and current, it cannot be accelerated to full speed using reduced voltage and current.

• Power: 1kw To 1000 Kw
• Voltage: 220-415V
• Body Material: Mild Steel
• Working Temperature: 50 Degree C
• Frequency: 50Hz
• IP Rating: IP54,IP55,IP64 and IP65

• •Frequency: 125KHz
• •Number of cards: 1,200
• •Number of readers: 1 built-in
• •Interface: RS232-TTL

Your only choice for home security solution.•The optional external proximity standard/keypad Wiegand reader.•Input Ponits : 2 NV input•Output : 1 relay•Dimension (mm) : 83W x 121H x 32D 

• Power: 2600 kVA
• Usage/Application: For Generator Synchronisation
• Brand Name: OVN
• Material: Mild Steel
• Frequency: 65 Hz
• IP Rating: IP 65
• Phase Type: Single Phase
• Panel Type: Synchronization Panel

We are engaged in manufacturing, exporting and supplying premium range of HT Panel Accessories that is made using the high grade raw materials as per the needs of the users. Our HT Panel Accessories is highly used in the high tension panel parts. Features Optimum quality High strength Long functional life Dimensionally accurate Material of Construction CRP Furner Copper Aluminum Plastic parts

• Phase: Single Phase
• Material: Mild Steel
• Automation Grade: Manual
• Brand: Newchrom Technologies
• Display Type: Analog Display
• Pressure (kg/cm Square): 0-7 Kg/cm2
• Mounting Type: Wall mounting
• Weight (kg): 2 Kg
• Accuracy: 99.99%
• Usage/Application: Gas industries

• Features: Shock proof , Industry approved design , Reliable

• Voltage: 20 - 26 V.D.C.
• Alarm Current: 180 ma
• Weight: 565 gm
• Colour: Red
• Material of Cons.: MS
• Zone: 2 Zone to 16

• Features: Reliable functionality, Longer service life, Low maintenance .
• Item Code: UB-5315

We are one of the recognized names in the industry for designing, keeping in mind the specific requirements of the clients, and providing an array of Electrical Panels some of which are listed below. These panels are made of good quality materials in accordance with industrial quality standards. These find their application in commercial buildings, hospitals, industries, dairies, telecommunications, research laboratories etc.  Synchronizing Panel.