Industrial Filtration Systems Dealers in Delhi

Our Activated Carbon Filter has a mild steel pressure vessel that has external valves for controlling the flow of water during treatment process. The media of our Activated Carbon Filter has layers of crushed gravel and graded pebbles. An inlet distributor is equipped in it that directs the inflow of raw water upwards towards the top-dished end. Then the filtered water goes through bottom collecting system that controls the assists in the cleaning of the filter. We provide the Activated Carbon Filters that have their internal surface painted with anticorrosive paint or epoxy based paint. Flow indicators are given as optional extras for controlling and measuring flow of water. Pressure Gauges are also provided at the inlet and outlet. An orifice board is fitted in the drain for controlling flows. Our Activated Carbon Filter effectively chlorinates water for removing organic impurities.

• Material: Plastic
• Usage: Water Filter
• Inlet and Outlet Diameter: 40 - 100mm
• Filter Thickness : 8 - 20mm

With the MFP series, Palas® offers high-precision testing systems for the development and quality control of filter media. From HEPA qualities with high separating efficiency to pre-filtering qualities, the test rigs in the MFP series deliver clear, fast and therefore cost-effective testing results. Based on the test requirements specified in standards like EN779, ASHRAE 52.2, DIN 71460-1, ISO TS 11155-1, ISO 5011, EN 1822, ISO 29463 or based on special practical requirements, the MFP test rigs are equipped with different systems for aerosol generation, electrical discharge of aerosols, aerosol dilution and air humidifiers. The clear determination of the fraction separation efficiency is performed highly accurately using the aerosol spectrometers Promo® 1000, 2000 and 3000. The wide range of interchangeable welas® sensors allows the measuring system to be perfectly fine-tuned even for particle concentrations up to 1 gm3 with SAE dust in accordance with ISO 12103-1.

Activated Carbon operates by adsorption of various compounds that cause impurity. With a huge adsorption area for chlorine and organic molecules to get attached, the carbon is able to detach the matter from the substance. The attraction is controlled either by reduction of distance between carbon surface and adsorbed substance or by increasing carbon density. The Activated Carbon Filter made available by us operates on this mechanism and is manufactured in line with the industry standards to offer a highly effective filtration system for various areas.

• Brand Name: BIOTIC
• Condition: Good
• Material: Mild Steel
• Usage: Application in industrial production, agriculture environmental protection.
• Item Name: Activated Carbon Filter
• Place Of Origin: Delhi
• Min. Order Quantity: As per client requirement

Clients can place orders with us to buy Activated Carbon Filter. We are renowned Activated Carbon Water Filter Media Manufacturer, Exporter and Supplier in New Delhi, India. The Activated Carbon Water Filter Media, offered by us, are manufactured from mild steel/FRP closed vessel incorporating frontal piping fitted with valves and activated carbon granules as filter media. The water is passed through an under bed media and granular activated carbon layer. Operated under pressure, Activated Carbon Water Filter Media has a back flushing arrangement, which effortlessly flushes away the deposited impurities at carbon granules. Activated Carbon Water Filter Media is used to remove free chlorine, phenol, taste and odor. Our Activated Carbon Water Filter Media is also used for reducing COD/BOD. Activated Carbon Water Filter Media can be used as initial unit for industrial water treatment. Our Activated Carbon Water Filter Media is also used as pretreatment and tertiary treatment of waste water. Due to its highly developed porous structure and huge specific surface area, activated carbon has very strong adsorption capacity. Activated Carbon Water Filter Media is used as a catalyst or catalyst carrier and finds wide application in industrial production, agriculture environmental protection. Raw Material Used : Mild Steel

• Type: Automatic
• Material: Stainless Steel
• Certification: CE Certified
• Voltage: 220V
• Warranty: 1 Year

An Activated Carbon Filter (ACF), like the Pressure Sand Filter, is a tertiary treatment unit. It receives the water that is already filtered by the Pressure Sand Filter and improves multiple quality parameters of the water: BOD, COD, Clarity (turbidity), color and odor.

• Filtration Capacity: 0-5 t/h
• Installation & Maintenance Required: Yes
• Weight of Filtering Material: 0-200 kg
• Inlet and Outlet Diameter: 0-40 mm
• Item Code: 20CTO

• Feature: Longer life,Compact size,Easy to useHigh performance,Low maintenance,Sturdy design

We are offering sodick filtration equipment. 340 x45 x 300 mm. 3 ~ 5 micron porosity maximum filtration area and garantee of minimum 300 hours working capapcity

SANTONI "BAGPULSE" pulse-jet fabric Bag Filter System is used for removing particulate materials from process and general ventilation air as well as to recover valuable products from several manufacturing processes. Santoni is also counted among the most reliable Jet Bag Filter Systems Manufacturers in India. As a standard of the industry Bag Filtration Systems have been used for diverse applications all over the world. "Bagpulse" collectors add versatility and in-built efficiency to the conventional bag filter designs for dust collection and pollution control applications. Now you can select the most appropriate size and design to meet your specific requirements. INLET CHOICES The "BAGPULSE" collector design of offers either top entry or hopper entry to meet the needs of your applications. For fine dust (such as talc) on applications with low dust concentrations and with higher air-to-fabric ratios, top entry is more suitable. Top entry generates a down flow of air throughout the collector, due to which it aids the movement of particles towards the hopper. In case of course dust (such as sand, etc.) and high dust loads, hopper entry is preferred. Heavy particles naturally gravitate to the hopper. PULSE-JET CLEANING The filter bags in the "Bagpulse" collector are continuously cleaned with pulses of compressed air which are initiated by an electronic sequential timer. Small volumes of high pressure compressed air are directed from a reservoir tank through solenoid valves and nozzles. As the burst of air passes through the venturi at the top of each bag, it induces a larger volume of additional air into the clean face side of the bag, inflating the fabric bag and breaking the dust layer on the outer face of the bag. The fabric gets a secondary cleaning as the pulse bounces back up the bag. Pulse-jet cleaning provides an effective means of reconditioning the fabric without interrupting the normal airflow through the filter system. Since the pulse-jet collectors operate at higher filtering velocities than the corresponding fabric collectors which are cleaned either by mechanical shaking or low pressure reverse air. CONVENIENT BAG REMOVAL In most of the conventional bag filter systems filter bags are removed from the top side, which means first the top assembly, including venturies, etc., has to be opened or dismantled, and then each bag has to be lifted up. The operation requires several persons working for several days. Moreover, the user has to ensure that the height of the ceiling should be at least double the height of the bag filter system. Bagpulse from SANTONI are designed in such a way that the bags can be removed from the side panels of the collector, without having to dismantle any part, which means that the bags can be removed by a single person in a matter of a few minutes. PRESSURE-DROP ACROSS THE COLLECTOR Since the bags are continuously cleaned the pressure drop is very low and almost constant. Though the pressure drop will depend upon factors like air-to-fabric ratio, temperature of air, dust loading, fines of dust, etc., normally it will range between 75 to 150 mm WG. COMPRESSED AIR REQUIREMENT SANTONI�s BagPulse collectors are designed for optimal use of compressed air for bag cleaning. The actual air consumption will depend upon various parameters of the final applications, such as dust loading, air-to-fabric ratio, type of filter media used, etc. MATERIAL OF CONSTRUCTION The standard material used for the construction of BagPulse collectors is CRC mild steel treated for rust prevention, double coated with red oxide primer and painted in color of your choice. Special materials of construction, like, SS, PVC, FRP, etc. can be used to meet the application requirements. SUPPORT STRUCTURE The system is built with self-supporting strong structure out of steel sections. The ground clearance under the hopper outlet flange, as a standard is kept at 1200 mm, though it can be designed to provide any clearance as per your requirements. FILTER MEDIA For general applications heavyweight "Non-woven, needled, felt media" is used for high collection efficiency and long life. Felts with special surface finishes to suit physical and chemical nature of the dust to be handled and humidity and temperature of the air is also available.

Bag filter system are very economical and suitable for applications that generate course dusts – for example saw dust and wood shavings.Closed Bag Filter System – bags are enclosed in a chamber – can be installed outdoors too.

• Filter Funnel Glass with Aluminium Clamp, Neoprene cover and Cork Capacity- 250 ml (FFG47)): One
• Membrane Filter C. N. 47 mm/0.45 µm pack of 100 . (Cat no - 160047X): One Pack
• Vacuum Flask one litre. (Cat no - FF1000): One
• Vacuum pump diaphragm type-oil free. (Cat no - V-300): One
• Air vent filter- Hydrophobic PTFE 50 mm/ 0.2 µm (Cat no - 200050RI): One
• PTFE Syringe Filter 25mm /0.2 µm with needle . (Cat no - SPTT): One
• Flexible Silicon Tubing 1 mtr. (Cat no - SPTT): One
• Plastic Tweezers (Forceps) (Cat no - SPTT): Two

Applications : High product recovery under negative pressure for superfine filtration.

We at A3 Techno Crafts provide fully automated systems for filtration of surface or well water. Performance: 3 to 48 m3/h or 70 to 1100 m3/day plant.Ultrafiltration allows in many cases the utilization of alternative raw water instead of precious tap water. The use of surface water or ETP water therefore saves cost and protects the environment.With a wide range of optimized UF systems, we are a strong partner for you in all ultrafiltration applications.We will be happy to support you on ultrafiltration solutions and discuss potential savings and ROI based on your project data.  Very short payback period, usually

Owing to the laborious efforts of a highly experienced team, the company has emerged as a renowned Manufacturer, Exporter and Supplier of Activated Carbon Filter in Delhi (India). The high quality Activated Carbon Filter is fabricated using the best quality raw materials and is known for its efficiency and reliability. The company offers the best Activated Carbon Filters at the market leading prices. Highlights of Activated Carbon Filter : Used to remove odor and color of the water and waste waterUsed in the following :Sewage treatment plantEffluent treatment plantWastewater treatment plantGranular Activated carbon is usedFine porous size

We are engaged in manufacturing and supplying a highly effective Activated Carbon Filter. The Activated Carbon Filter offered by us is extensively used for the removal of chlorine. In addition to this, our Activated Carbon also improves the color, odour, and taste of water. The Activated Carbon Filter which we make available is designed for reduction of dissolved organic chemicals from municipal and industrial water supplies. High Activity Carbon (HAC) installed in this Activated Carbon Filter is chiefly used for almost every type of water treatment applications. Feature & Advantage This product can be used for filtering waters having a wide range of pH levels.Large surface area results in an exceptionally high capacity and efficiency.Balanced pore structure gives a more efficient adsorption range.HAC is very durable so losses due to attrition are kept to a minimum.HAC will impart a high “polish” to the filtered water. Conditions For Operation Water to be filtered should preferably be free of oil and suspended matter.The water to be filtered should be relatively free of iron and turbidity for maximum service life.Water pH range: wide range.Bed depth: 26-30 in. Products Features Made with FRP / Composite pressure vessels ensuring longer life.High quality Activated Carbon for longer life.Automatic / Manual Valve.Easy Installation & Maintenance.Easy operation.Flow Rate 1000 LPH to 10000 LPH. Products Application Removal of color, Odour and impurities from utilities as well as drinking water for building and for light industrial applications.Pretreatment to other water treatment plants..

• Voltage: 220/440 V
• Frequency: 60 Hz
• Material: Stainless Steel
• Uses: Industrial, Commercial
• Phase: Three Phase
• Automatic Grade: Fully Automatic

Bag in Bag Out Filter System provide a wide performance for preventing the workers from bio-hazard organisms and viruses while they are doing the regular HEPA or ULPA filter replacement work. It is the most effective equipment available for any zone, needing a special critical filtration cleanliness level and negative pressure environment. Bag in Bag Out Filtration System includes pre-filter (and maintenance access door), HEPA or ULPA filter (and maintenance access door), inlet & outlet connecting duct flange unit, frame and mounting bracket. The equipment is full welded with argon welding except maintenance access door. It can be made not only at workshop but on site also. Magnehelic gauge becomes standard for pre-filter, and ULPA or HEPA filter. The housing is made from either T304 12 & 14-gauge stainless steel or optional T316 12 & 14-gauge stainless steel. The locking trays are made from T304 12-gauge stainless steel or optional T316 12-gauge stainless steel. Retrieval rods ease the removal of filters. Seam welding reinforces strength and prevents leakage. Door(s) have perimeter gasket in order to ensure a positive seal. Door knobs are cast aluminum. Inside each unit’s door(s), a ribbed inlet collar provides for a PVC bag attachment. The PVC bag creates a barrier seal between service personnel and the contaminated filters. With this design, filter-servicing personnel are not in direct contact with any threatening particulate. An initial bag kit is included with each order. Depending on end user requirements, a variety of prefilter, adsorber, and/or HEPA filter sections are incorporated into the unit. Housings may be joined in series or parallel. Test sections in series may also be incorporated with the housing. Specific fan filter combinations are also available for isolation room systems.

• SKU Code: AP904-3M
• HSN Code: 84212120
• Brand Name: 3M
• Categories: Chlorine Removal Systems

• Country of Origin: Made in India
• Airflow : 100 lph (m3/h or CFM)
• Filtration: upto 1 micron
• Material: steel
• Automatic Grade: Semi-automatic
• I Deal In: New Only

• Brand Name: Daiflow
• Max Capacity: 10000 Lit/hr
• Minimum Order Quantity: 1 Onwards

B S Enviro Activated carbon filter unit is filled with different iodine value activated carbon granular filtering media. Activated carbon Filter will Remove organic impurities,bad odors,color,free chlorine etc. from raw water. In this type of filter, activated carbon is processed to have high positive charge and as soon as the negative charged water is passed through it, it absorbs the negative charged contaminants. Our range of activated carbon filters is known for its features such as effective, easy to use and reliable.