Industrial Mixer Dealers in Kirti Nagar, Delhi

• Application: Industrial
• Warranty: 3 Years
• Type: Mixing Tank
• Material: Metal
• Finishing: Polished
• Shape: Round

We are a leading brand indulged in manufacturing, exporting and supplying a wide variety of Chemical Agitator Mixing Tank based in Delhi. Our collection of high grade of Chemical Mixing Tank with Agitator provides consumer a safe Tank ideal for preparing a concoction of various chemicals. We provide consumers a well designed Chemical Agitator Mixing Tank that consists of chemical resistant and non-corrosive features. We accept all kinds of bulk orders from customers

• Warranty: 1 Year
• Condition: New
• Capacity: Depends upon requirements
• Brand Name: YASHIKA
• Design Type: Customized
• Power (W): 2 KW
• Automation Grade: Semi-Automatic
• Voltage (V): 440V
• Phase Type: 3 Phase
• Weight (kg): 50kg
• Material: SS

Jogindra Universal Quick Mixers are suitable for any applications like manufacturers of master batches and compounds, plastics pellets, where bulk materials are to be mixed quickly and at low cost. The success of these mixers on the market and numerous satisfactory customers from various industries shows that Jogindra have continuously updated these mixers for many years and at the same time offer a good cost-performance ratio.

The basic desining and construction of the Zenith Mixing Mill has been subjected to continuous improvements. which have permitted them to keep pace with the day-to day needs of the industry. Available in sizes varying form 6” x 16” to 26” x 84” for compounding, warming, sheeting of various grades and types of rubber and other material. Silent Features No. Of Rolls Two Material of Rolls Chilled Cast Iron hollow ground finished, bored through for even heating & cooling, having surface Hardness of 500 - 550 BHN No. Of Guides Four (Two fixed and two movable) Roller Bearing Spherical Roller Bearing Type of Housing Sealed Housing Housing is made from Graded Cast Iron of High quality casting free from holes & casting defects Column Frame Two Nos. Made of Graded Cast Iron as per housing material Nip Adjustment Nip adjustment at two roller ends is done manually using two separate screw attached to the housing through shear plates/fuses (0-10 mm) Friction Gears High precision-machined sets made of forged steel Lubrication System Radial Grease Lubrication Pump Base Frame Uni - Bed design with heavy-duty base frame made up of Carbon Steel sections suitable for anti - vibration mounting or fitment with anchor bolts in concrete floorings Transmissions Through a suitable Helical Gearbox Standard Accessories Panel Board consists of Voltmeter, Ammeter, Phase Indicators, On & Off Switches, Emergency Stop with Auto reversal arrangement I Electromagnetic brake for emergency stop actuated by overhead cradle bar operated by limit switches I Gear covers I Safety Trip Rod\ I Material Collection Tray I Shear Discs/ Fuses I Return Water Funnels I Glass see through tubes I Radial Grease Lubrication Pump.

• Condition: New
• Voltage: 110-230 V
• Capacity: 200-10000 kg/hr
• Material: Steel

We offer High Shear Glaze Mixers to our valuable customers. These mixers are commonly used for homogenous mixing of various glazes and viscous chemical materials.

• Voltage: 220V/380V
• Condition: New
• Warranty: 1 Year
• Surface Finishing: Polished
• Material: Stainless Steel
• Capacity: 60 Kg

We are a prominent Manufacturer, Exporter and Supplier of Carbonated Beverage Mixing Machine. The Mixomatic units are designed for the production of soft drinks containing Carbon Dioxide. In this process, water is deaerated (optional) under a high vacuum. Deaerated water and concentrated syrup is mixed (ready syrup) in a tank and the carbon dioxide is mixed homogeneously with ready syrup in a multi stage high pressure pump. Moreover, the Carbonated Beverage Mixing Machine is available in different specifications to meet the diverse requirements of the clients. Operating Procedure Degassing of Product WaterMixingCoolingCarbonationCIP Salient Features Direct Control of Brix rather than RatioThe Brix is directly controlled using mass flow meter for measurement, for any deviation in the set point & achieved point the syrup flow is controlled to achieve in terms of brix required. Controlled Injection of CO2 in terms of gm/litre. The Co, is injected in gms/litre. For any change in the flow rate of beverage the amount of CO, to be injected changes automatically. The change in line pressure of CO2 is compensated automatically, with in the set limit of CO, pressureDifferent CO2 pressure settings Injection pressure of CO, & buffer tank pressure can be set differentlyNo manifold & hand valves for different mode of operation. There is no requirement of any change over manifold & hand operated valves for running the machine indifferent modes. (like CIP, Discharge, Production). Once the mode of operation of machine is selected, the valve changes their position as per the mode requirementMan Machine interface: The top of end communication between operator & machine. Complete alarm history. Trends can be created & saved for production Additional Benefits Replacement hand operated flow control valve with electronic controlRemote operating Interface of the machine. The machine can be operated & controlled in full respect sitting in the office itselfCustomized recipe module with real time trendsReal time trends stored on hard disk for analysis purposeShift wise/day wise MIS reports for quantity produced, Mixer Usage, etc.

Ribbon Blenders consist of a U-shaped horizontal trough and a specially fabricated ribbon agitator. A ribbon agitator consists of a set of inner and outer helical agitators. The outer ribbon moves materials in one direction and the inner ribbon moves the materials in the opposite direction. The ribbons rotate at approx. 300 fpm moves materials both radially and laterally to insure thorough blends in short cycle times. Ribbon agitators are used for blends that will be between 40 and 100% of the rated capacity of the blender. An alternate agitator is our paddle design. The paddles are positioned to move materials in opposing lateral directions and radially. The paddle design is normally applied where friable materials are being blended and when batches as small as 15% of the total capacity are going to be mixed in one blender.

• Voltage: 220-440 V
• Warranty: 1 Year
• Frequency: 50 Hz
• Capacity: 100-1000(ltrs)
• Material: Stainless Steel
• Phase: 3 Phase

We facilitated with the state of art infrastructure for manufacturing of storage Tanks, Mixing Tanks Agitator & Radial jet mixing in different Capacity & Application. The material should be tested before any process; we use the TIG welding for better finishing & applications.

slow speed mixers, Extruder Machine, granulators, Agglomerator

Heavy duty sturdy machines.  Best suitable for mass productions. Gives optimum results. Bowl & arm in stainless steel [304 gr.]. Hydraulic system for bowl up & down movement. Mechanical electrical panel at front top for easy operation / working.

• Voltage: 230-250 volts A.C.
• Speed approximately: 4000rpm
• Model: ASI-804

Specifications royal tile machines enlarge view request a quote {short description of image} capacity :- 100 kg power :- 3 h.p. Gear box system color pigment mixer

• Phase: Single Phase
• Brand: Graco
• Usage/Application: Industrial
• Automation Grade: Semi-Automatic
•  SPEED: 580 rpm

1200W / 230V / 50 Hz.  Spindle Dia 120mm  Spindle length 550 mm  Speed 580 - 760 rpm  5 Speed Regulator

• Country of Origin: Made in India
• Power: 2 HP
• Item Code: doubleconemixer
• Usage/Application: Industrial
• Design Type: Standard
• Brand: RTM
• Automation Grade: Automatic
• Capacity: 150 kg
• Voltage (V): 320

• Power: AC220V, 50Hz/AC;110V 60Hz,60 W
• Weight: 33Kg
• Working Capacity: 1000g*2 Jar, 500g*2 Jar

MIX 500D Slope efficiently and evenly mixes the solder paste to a liquid state. It helps to achieve better results of stencil printing and reflowing processes. The use of the mixer also reduces the chances of absorbing air moisture as it is no longer necessary to remove the lid of the solder paste jar before the paste is actually used in production. 3 Safety design: The lock, Proximity switch and the electromagnet valve can assure the safety for the physic body. The only maintenance work the user needs to do is cleaning; and it works steadily with low noise. With LED, indicators and buzzer for warning. It is easy to operate.

slow speed mixers, extruder machines, High Speed Mixer

• Motor: 3 HP
• Roll size :: 14”Φ x 36” L
• Blender roll diameter :: 265 mm
• Shift screw diameter :: 75 mm

The features of stock blender is uniform quality, good dispersion of chemicals, increased blending quantity and decreased blending time. Roll size : 14”Φ x 36” L Motor : 3 HP Blender roll diameter : 265 mm Shift screw diameter : 75 mm Roll size : 16”Φ x 42” L Motor : 3 HP Blender roll diameter : 265 mm Shift screw diameter : 75 mm Roll size : 18”Φ x 48” L Motor : 3 HP Blender roll diameter : 265 mm Shift screw diameter : 80 mm Roll size : 20”Φ x 54” L Motor : 5 HP Blender roll diameter : 265 mm Shift screw diameter : 90 mm Roll size : 22”Φ x 60” L Motor : 5 HP Blender roll diameter : 265 mm Shift screw diameter : 90 mm Roll size : 24”Φ x 72” L Motor : 7 1/2 HP Blender roll diameter : 265 mm Shift screw diameter : 100 mm  

Agitator Finished Syrup Tanks, Semi Automatic Cup Filler Machine

• Capacity: 50LTR -500 LTR
• Automatic Grade: Semi-Automatic
• Material: SS
• Application: Industrial
• Powder Mixing: YES
• Shape: U SHAPE

• Country of Origin: Made in India
• Application: Commercial and industrial
• Material: Stainless Steel
• Capacity: 100-500 L
• Automation Grade: Automatic
• Model Name/Number: YE5CV

We are offering high speed mixer. High speed mixers with s.s. Lining inside the drum

High Speed Mixers, Attritor, Ribbon Mixer, Resin Filters, Reaction Kettle

heating cooler mixer, Die Head, Grinding Machine, hdpe pipe plant

mixing mill machine, Rubber Conveyor Belt, Flap Hydraulic Press

Finished Syrup Tanks With Agitator & Radial Jet Mixing