Industrial Scrubbers Dealers in Janakpuri, Delhi

• Type: Wet Scrubber
• Power: 3.7KW - 200KW
• Voltage: 220 V
• Power Source: Electric
• Automation Grade: Automatic
• Material: ABS
• Air Velocity: 8.7m/s
• Frequency: 60 Hz
• Capacity: 5000-40000 CFM
• Fan Speed: 1299 rpm

PECMA Ventury scrubber comprises a contact section called a venture section in combination with a separator section. Dust laden gas is led into the venture section where it passes through a water screen at the venture throat at high velocity. This results in a through mixing of water droplets and dust particles which agglomerate to form large particles which are then collected from the gas in the separator section. The water supply units and the atomizing system permit recirculation of water with high dust content. Ventury Scrubbers have successfully been installed for cleaning particulate matter from exhaust gas streams of foundries crushing plant, electric are furnaces, basic oxygen furnaces and urea prilling towers, phosphatic fertilizer plants and other chemical and petrochemical industries.

Develop Lot of System for air pollution control under guidance of Mr. O. P. karwal like, Scrubber, Multicycle dust collector, Bag FIlter & ESP. We leverage our experience and expertise to apply the appropriate technology to each customer’s air pollution control requirements. Technology is selected targeting the lowest total cost of ownership (balancing initial capital cost with on-going operating cost) while insuring discharge limits are achieved. Our performance guarantee instills confidence that our engineered solution will exceed emission goals.

• Capacity: 1 Ton to 20 Ton
• Approximate price: 20 Lakh to 01 Cr
• Material of construction: SS304/SS 316
• Erection & Commissioning time: Maximum one Month
• After Sales Service: Yes

Wet Scrubbers are effective air pollution control devices for removing particles and/or gases from industrial exhaust streams. Wet scrubbers operate by introducing the dirty gas stream with a scrubbing liquid – typically water. Particulate or gases are collected in the scrubbing liquid. Wet scrubbers are generally the most appropriate air pollution control device for collecting both particulate and gas in a single system. TECOR Group offers a variety of Wet Scrubber systems specifically designed for your process application. Many important operating variables are considered when evaluating the size and type of scrubber for any specific application. We will work with you and use our experience and knowledge to provide the proper solution for your process.

Wet Scrubbers are used in chemical process and hazardous fumes. Available type of Scrubbers: For only fumes straight inlet packed type wet scrubber is used where spray take place by re circulation of the existing water followed by the make up water. Mist eliminator is used on the top section of the scrubber to avoid carry over of the water in the atmosphere. For fumes with fine dust/powder, ventury type inlet wet scrubber is considered where the fine dust/ powder get mixed due to high velocity and pressure. Spray system is also considered by re circulation of the existing water followed by the make up water. Mist eliminator is used on the top section of the scrubber to avoid carry over of the water in the atmosphere. For fumes with heavy and huge amount of dust/powder, ventury type inlet wet scrubber is considered where the dust/ powder get mixed due to high velocity and pressure .Spray system is also considered by re circulation of the water from other reservoir since existing water cannot be re-circulated due to slurry formation, while over flow water can be used to the other reservoir for re circulation. Mist eliminator is used on the top section of the scrubber to avoid carry over of the water in the atmosphere. For fumes with heavy and huge amount of dust/powder, straight inlet wet scrubber is also considered static water reservoir, where the fumes with dust get in contact with water reservoir and dust particle are settled under the reservoir as slurry and fumes without dust get exhausted via M.S water eliminator.

• Application: Industrial
• We Provide: Consultation
• Efficiency (%): 98%
• Material: Mild Steel
• Airflow (m3/h or CFM): 80000 m3/h

Wet Scrubber, TSE MBBR - Sewage Treatment Plant, MBR (Membrane Bioreactor)

dust scrubber, cherry picker, motor graders renting services

We offer fume exhauster. Description saviour kb-20 is a portable blower cum exhauster for either removing smoke ,welding fumes etc or pumping in fresh air having light weight yet tough pu housing capable to deliver 800cfm of air. It comes with a collapsible hose of 30 feet enclosed in a box.the hose is made out of reinforced polyester with pv coating and ss ribs to make it fully non corrosive and tough . The hose diameter is 8". Quality process certifications : factory test certificate

Fume Extractor, Stainless Steel Cross Over Bench, Laboratory Spot Extractor