Industrial Switches Dealers in Jhilmil Industrial Area, Delhi

We are offering float switch. Float switch can be used to control a pump for either tank fill or tank emptying (a high or low level cut out) between ranges of 50 to 1000 mm. The contact is made using a micro switch activated by the rocking motion of the arm with the rise and fall of the float.

A Reliable Level Switch Based on Radio Frequency principle for Solids, Liquids, Slurries. Levsen RF Level Switch comprises of an electronic controller, a sensing probe and coaxial cable for the connection of the electronic controller to the probe. The Electronic Controller provides RF signals to the probe and measures the changes in parameters provided by the sensing probe mounted in the material (to be measured) container. The sensing probe does not contain any electronics.

• Brand Name: Tekemc,Tekmec
• Material: Alloy Steel, Cast Iron, Stainless Seel,As per requirement
• Color: Black, Grey, Silver
• Condition: New
• Finishing: Non Polished, Polished
• Application: Automobiles, Industrial Use
• Feature: Crack Proof, Durable, Long Life, Rust-proof

INTRODUCTION TEKMECmake seriesTLSLimitSwitches arebeingmanufacturedas per rigid quality standards conforming to IS/IEC 60947 (Pt. 5 / Sec. 1). These Limit Switches performs in most contaminated atmosphere. KEY FEATURES High AccuracyLong Electrical / Mechanical Life.Protection against oil, dust and other industrial conditions. ENCLOSURES Limit Switches enclosure has been designed for service under most aggressive conditions. A rubber diaphragm with a sealing ring under the push rod guide provides protection against any leakage from this direction. A ridge on the housing along with oil resistant rubber gasket under the cover prevents oil and water seepage. External mounting holes further ensure oil tightness. The enclosure complies with IP65 protection requirement. OPERATION An ingenious design of the limit switch head permits rotation in steps of 90° thus enabling use of the actuating rod from any of the four directions Limit Switch are available with straight as well as angular roller levers. Straight lever is used with horizontal actuator while angular lever for vertical actuator. CONNECTIONS Terminals are suitable for straight end connections for two wires of equal or different sizes. HIGH ACCURACY Close tolerances for push rod guide and contract bridge lead to very high level of accuracy. Position of contacts for the Limit Switches maintained within very fine tolerances even after a large number of operations. APPLICATIONS For optimum utilisation of TEKMEC Limit Switches, appropriate application is very important. * Applied force should not be excessive. *Roller Lever should not be in opposition to the actuating movement.* Push Rod speeds upto 1M/sec are permitted in the direction of stroke. * Speed of moving contacts should not be less than 0.015 M/sec for DC* For lower operating speeds, use snap action switches.*Avoid installing Limit Switches in locations subject to heavy vibrations. * Actuator angle can be upto 45° with roller lever with actuation in the direction of roller level. CONTACT BLOCKS Contact Block has 1NO & 1NC contact. Contact Blocks can be used as a limit switch by itself in control cabinets and other similar applications. If desired,a transparent cover can be provided over the contact to protect against the dust settling on the contacts. Three types of Contact Blocks are available: • Normal:for relatively quick operation. • Snap Action:for slow operation The contacts are made from special silver alloy which ensures satisfactory operationeven atlow voltages. Contacts are rated at 10 Amp

We offer a wide array of reverse forward switches known for its exceptional performance and quality. We manufacture the safest reverse forward switch. The products are customized as per the need of the customer at very competitive prices. salient features : outstanding load capacitycost effectivedurabilitysafe to use applications : electric componentsdistribution network specifications : range : 16amps. To 25/32 amps.rated voltage : 240v. / 415v.types : 2 packets r/f switch, 3 packets r/f switch, 4 packets r/f switch, cam operated r/f switch(new)

• RANGE: 16 AMPS - 25/32 AMPS.
• RATED VOLTAGE: 240 - 415 VOLTS
• TYPES: CAM OPERATED R/F SWITCH

• RANGE: 16 AMPS - 25/32 AMPS.
• RATED VOLTAGE: 240 - 415 VOLTS
• RATED VOLTAGE: 240 - 415 VOLTS

• Operation Mode: Omnidirectional
• Allowed Fluid Density: 0,70a 1,15
• Maximum Pressure: 3,5 Bars
• Maximum Temperature: 85oC
• Protection Index: IP 68
• Electric Characteristics: 250 VAC- 50/60 Hz
• Cut-out Power: 20 (8)A (20 A resistive- 8 A inductive)
• Microswitch: Silver / Cd oxide reverser contacts
• Biconical Shell: Copolymer Polypropylene
• Cable: Neoprene or HR HY (hypalon) HO7RN8-F
• Cable Type: 2 or 3 conductors 1 mm2 (with or without T, according to versions)
• Float Weight Without Cable: 105 g
• Cable weight: Neoprene 115 g/m - HR HY110g/m
• Adjustable Ballast On: Loaded resin 175 g or 250g - Plastic 200g -ecological
• Standard Cable Length: 0,40; 0,50; 1; 3; 5; 10 and 20 m (other lengths on request)

• Brand Name: ASE
• Mechanical Life: 10000 cycles
• Voltage: 250 VAC
• Current: 16 A
• Warranty: 6 Months
• Features : Long functional life, Highly reliable, Durability

Reverse Forward Switches, twincore cables, Flat Cables

FLP Pressure Switch Temp Switch Flow Switch, Electrical Control System

Reverse Forward Switches, electrical devices, Rewirable Switchgears

Reverse Switch, tricycle parts, auto parts mold, Plastic Moulding Job Work

Limit Switch, AC Motors, dc thyristors drives, DC Motors

Limit Switches, Push Button, copper shunt, FOOT SWITCHES

Reversing Switch, AC Box, extension cords, Main Switch

Pressure Switches, Air Compressors, Agriculture Sprayers and Pumps

Reversing Switch, busbars, change over box, fabricated boxes, Mcb Box

Power Switches, Electrical Power Socket, Sockets, Electrical Connectors

Power Switches, Electrical Accessories, Main Switch, Switchgear

Pir Motion Sensor Switch, Magnetic Float Sensors