Back Back
Dwyer 1823-40 Low Differential Pressure Switch Range 5-44 Inches wc
7,500 Per Piece
1 Piece(s) (MOQ)
Dwyer 1823-40 Low Differential Pressure Switch Range 5-44 Inches wc Model - 1823-40 Range - 5-44 Inches wcFeaturing a compact switch with 2% repeatability for enough accuracy for all but the most demanding applications. Setpoint adjustment inside the mounting stud permits mounting switch on one side of a wall or panel with adjustment easily accessible on the opposite side. It comes with an operating range of 5-44 Inches wc Features Compact size and Repeatability, Provides a high-value switch for many Industrial Applications Designed for panel and wall mounting and provides easy access that simplifies making adjustments or changes to switch setting Range of 5-44 Inches wc. meets exacting specifications for a low pressure switch Applications Process Applications Mechanical Equipment Control
Mini Magnetic Float Probe Level Switch
800 - 1,500 Per Piece
01 Piece (MOQ)
Best Deals from Industrial Switches
Pizzato EL AD23006 Limit Switches
4,000 Per Piece
1 Piece(s) (MOQ)
ORING IGPS-1082GP Series Industrial 10-port unmanaged Gigabit PoE Ethernet switch
21,200 Per piece
1 piece (MOQ)
Support 8 ports IEEE 802.3at compliant PoE and total power budget is 120W with maximum 30W per port of 24V mode Total power budget is 180Watts with maximum 30Watts per port of IGPS-1082GP model Support up to 9.6K Bytes Jumbo Frame Support up to 4Mbit Packet buffer Support auto-negotiation and auto-MDI/MDI-X Support store and forward transmission Support flow control Provided relay output for power failed warning system Provide DIP-switch to setting SFP speed Rigid IP-30 housing design DIN-Rail and wall mounting enabled Industrial 10-port unmanaged Gigabit PoE Ethernet switch with 8x10/100/1000Base-T(X) P.S.E. and Overview IGPS-1082GP series is full Gigabit unmanaged PoE Ethernet switches with 8x10/100/1000Base-T(X) P.S.E. ports and 2x100/1000Base-X SFP ports. IGPS-1082GP series also support Power over Ethernet, a system to transmit electrical power up to 30 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IGPS-1082GP series switch has 8x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection. And support wide operating temperature from -40 oC to 75 oC. Therefore, the switch is one of the most reliable choices for rolling stock and highly-unmanaged PoE Ethernet application. Features 2x100/1000Base-X, SFP socket
Sheet Metal Rotary Geared Limit Switch
Get Price Quote
Vertical Mounted Level Switch
Get Price Quote
Our company has cemented its presence as a distinguished Manufacturer, Exporter & Supplier of Vertical Mounted Level Switches in Delhi, India. The entire series is designed and manufactured as per predefined industry norms and market requirements. These can also be personalized, accordingly. One can easily attain our Vertical Mounted Level Switches, at modest rices.
Melt Pressure Transducers
Get Price Quote
As a quality driven institution, we are committed to manufacturing, exporting and supplying of exclusive range of Melt Pressure Transducers that are widely used in variety of industries like food, medical, chemical, etc. Our team of quality controllers checks the lot of raw materials, prior to assembling of Melt Pressure Transducers. These transducers are available in two unique styles; buyers can acquire them as per their requirements. We provide customized solutions, at cost effective prices. Details : Melt Pressure Sensors are utilized in a wide variety of industries, including polymer, food, medical, and chemical extrusion processing applications. Melt Pressure Sensors are available in two unique Styles. The CT style is the classic melt pressure sensor with a 6" rigid stem and 18" of flex capillary for optimum thermal isolation. The RT style offers only a 6" rigid stem. Both styles come standard with the 6-pin Bendix style bayonet connector, and a 1/2-20 UNF mounting thread. Our Melt Pressure Sensors are fully interchangeable with all other major brands Melt Pressure TransducerDescription : The Melt Pressure Transducer is ideal for general purpose Melt pressure applications. The unit features the industry standard 3.33 mV/Volt output and offers pin-to-pin compatibility with all competitors models utilizing the Bendix style 6 pin bayonet connector.The Melt Pressure Transducer comes standard with a 6" rigid stem, 18" of flexible capillary, and a 1/2-20 UNF thread for mounting in standard transducer mounting holes.Melt Pressure Transducers are measuring instruments that are subject to damage if mishandled, improperly installedor dropped.Features : 3.33 mV/Volt full scale output Accuracy +/- 0.25%, 0.5%, 0.1% Internal 80% shunt calibration Melt Pressure Transducer All welded all stainless steel construction Melt Pressure Transducer Diaphragm : The Melt Pressure Transducer is a sealed system. The sensing diaphragm is the most important component of the transducer. The standard diaphragm is of a one piece construction, machined from type 15-5PH stainless steel, with a proprietary coating designed to increase durability. It has a nominal thickness of 0.0050 inches. If the sensingdiaphragm becomes damaged in any way i.e.: dented, gouged or deformed, the transducer will no longer provide accurate readings and should be returned to for repair and/or replacement. See the repair and re-calibration information in the Technical section of our website for further details. Melt Pressure Transducer Mounting Hole : A poorly prepared or machined transducer mounting hole is one of the main causes of damage to the transducer. Extruder barrel wear should be monitored periodically. As the extruder barrel wears, the transducer diaphragm will move closer and closer to the barrel bore until it is flush with the sidewalls. Once the diaphragm is flush with the extruder barrel, it will wear at the same rate as the extruder barrel. To alleviate this problem, recommends that the transducer be recessed 0.0175" from the barrel bore. A copper spacer can be manufactured or purchased (to seal on the 45 degree seating surface) that will act as a separator backing off the transducer diaphragm from the inside barrel bore. If the transducer diaphragm protrudes into the extruder barrel, it is subject to unnecessary rapid wear and is subject to permanent damage by a passing screw flight. Melt Pressure Transducer Mounting Hole Threads : The transducer mounting threads should be 1/2-20UNF-2B. M18, M22, ¾ The mounting hole should be cleaned and inspected prior to the installation or reinstallation of a transducer. The use of a high temperature anti-seize compound will help in prevent galling and will allow easy removal of the transducer. Copper graphite anti-seize compounds are recommended. Melt Pressure Transducer Mounting Torque : Melt Pressure Transducers are capable of being installed at a mounting torque of up to 500 inch/pounds without damage or zero shifts; an adequate seal is generally achieved with a mounting torque of 100-200 inch/pounds. This can be accomplished by first installing finger tight and then tightening the transducer a quarter turn with a wrench. Excessive mounting torque will cause seizing and make the transducer difficult to remove. Melt Pressure Transducer Operating Temperatures : The Melt Pressure Transducer diaphragm is capable of operating at temperatures up to 750oF. The transducer electronics are capable of operating at temperatures of up to 150oF. It is important that the electronic housing not be exposed to temperatures above 150oF. Melt Pressure Transducer Affects of Cold Starts : One of the most common causes of Melt Pressure Transducer diaphragm damage is cold starts. A combined temperature and pressure transducer can be used to insure that the extruder barrel is up to temperature prior to the rotation of the extruder screw. Melt Pressure Transducer Removal or Replacement : The transducer should only be removed or replaced while the machine is at operating temperature and the polymer is liquid. Removing the transducer from a cold extruder will cause diaphragm damage due to polymer adhesion. A transducer should never be installed into a mounting hole where there is the presence of solid polymer. If the diaphragm is forced against a solid, the transducer can easily be overloaded and left with a very high zero offset, often too high to be rezeroed. Melt Pressure Transducer Diaphragm : If the transducer is removed warm from the machine, the diaphragm can be easily be cleaned with a soft cloth. If there is solid polymer present, a fluidized bed cleaning system can be used. Never use a wire brush, knife, or torch to clean the tip of a transducer.
Tamper Switch / Supervisory Switch
1,500 - 5,000 Per Piece
1 piece (MOQ)
Product Details “RC” make butterfly valve with tamper switch is designed to be used with quarter turn valve to electronically provide position indicator, mostly used on butterfly valve and ball valve for HVAC and Firefighting industry. Features & Specs Can be installed on bare shaft and gearbox Potential free contacts Ip66 & 67 rated Mechanical position indicator
Off Load Changeover Switches
Get Price Quote
100 Piece (MOQ)
Off-Load Changeover Switches (DP & FP) as per IS:13947 (Part I & III)
Elevator Pencil Read
Get Price Quote
1 Piece (MOQ)
Jai Balaji JLSL1 Limit Switch
Get Price Quote
100 piece (MOQ)
Danfoss, Wika Pressure Switch
1,000 - 8,000 Per Number
10 Piece (MOQ)
Differential Pressure Switch
Get Price Quote
Pressure Switch
50 Per Meter
Plc electrical panels, sequential controller, bag filters, diesel automation level switch pressure switch,yokgawa ph transmiter, tds,conductivity online modem, gas detection system lpg cng.
Limit Switches
Get Price Quote
SURDHI® Limit Switches have been designed to convert mechanical motion into an electrical contr The switches meet the Hi-Tech requirement of Switching technology demanding Sophistication, P and Reliability. These are designed for accuracy of operation, long mechanical life to withstand s vibration condition and to keep operating safely in highly contaminated atmosphere at a temperatun to + 65°C. Mechanical motion is generally in the form of cam, a mechanical component moving ti predetermined position. The cam engages the limit switch roller Lever or plunger and in turn makes an electrical contact inside the switch. The electrical control circuit is used to limit, position or reven travel or to initiate another operating sequence. Sailent Features : Liberal spacing is provided around the terminal for easy wiring. The enclosure is compact, dust &vermin proof with pressure die cast aluminium. The switches with IP-67 protection are completely oil tight, water tight with a shaft seal between the lever and the Dust Proof. These are designed for accuracy operation, Long mechanical life and to keep operation safety at a temperature - 20°C to + 65°C. These are having an outstanding long mechanical life of 20 million switching operations. The mechanical switching accuracy is maintained 0.01 mm even after 10 thousands switching operation. The Contact blocks can be taken out easily and replaced without risk of changing the operating characteristics of limit switches. Limit Switches are also available with a transparent protective cover to prevent dust setting on the contacts. Contacts are made up of special silver alloy which ensure satisfactory operation even at low voltage. Contacts are rated at 10 Amps. We are also making Mini Limit Switches 30mm Long Lever with 18mm Dia Metal Roller. Code SDVLM-1 Adjustable Roller Lever from 25mm to 80mm with 18mm Dia Metal Roller. Code SDVLM-A Top push Roller Operator with 12.5nn Metal Roller. CODE-SDVLM-TPR Top Spring Operated CODE-SDVLM-SSTS
Crane Limit Switch
Get Price Quote
Catering to the needs of the clients, we supply well-designed Crane Limit Switch. Our Crane Limit Switch is checked and verified through the stringent quality tests and these have longer durability. We provide the Crane Limit Switch at the market leading prices so that it suits the pockets of all our clients.
OMRON LIMIT SWITCH
500 Per Piece
10 Piece (MOQ)
Magnetic Level Switch
Get Price Quote
Malhotra Bros & Co. is a well-known Magnetic Level Switch Manufacturer and Supplier in Delhi. The Magnetic Level Switch goes through several quality-checks, which ensure its top-notch quality. The Magnetic Level Switch is an economical, maintenance free and reliable device used for high, low or intermediate point level switching. The Magnetic Level Switch is for tanks with inaccessible tops or bottoms and where insertion depths of top mounted models are exceeded. Construction & Operation Compact and rugged construction, consisting of a free moving float assembly and a switch enclosure in non-magnetic material to achieve undisturbed magnetic flux. It employs dual magnets- one carried out by the float arm and the other by the contacts carriers, housed in the switch enclosure. A change in the liquid level brings the like poles of the dual magnets opposite to each other, and resulting repulsion force ensures a change-over of contacts, of the switch housing. These Magnetic Level Switches come in various non-magnetic materials and construction styles to suit board range of medias/applications. It is designed to provide high repeatability and to minimize effects of shock, vibration & pressure. Installation Mounted internally or external through a chamber. External mounting is resorted to, where space is a limiting factor or mechanical devices like stirrers operate within the tank. Besides, in applications like boilers, reaction kettles etc., with external mounting, isolation are possible for regular servicing The switch is normally side-mounted; however for applications like slurry, vertical-installation is preferred On no account must a switch be used for the direct starting of burners, heaters, Motor-pumps, alarm, It is essential that the contacts are wired in series with the relay coil (N/V coil) in a contactor starter Applications Manual start & auto off in storage tanks Oil storage tanks to indicate high level, low levels or filling the tanks automatically Condensate receivers to control the operation of an electrically driven condensate pump Main water storage tanks to control the action of the pump used for filling or emptying the tank, automatically In baby boiler auto control of Pump motor & Electric Heater For the control and indication of liquid levels in vessels under vacuum In storage and service tanks on board ship to give indications in the Engine Room when the level in the tank is too high or too low Where a number of level switches are employed they can be supplied together with a suitable indicator and Alarm Panel embodying signal lights and an audible alarm system.
Float Switches
185 - 325 Per Pc.
10 Pc. (MOQ)
These Float Switch are used to control liquid (Water) level in storage tanks. Available in 2mt. To 10 mt. Cable length.
Danfoss KP-35 Pressure Switch
1,000 - 1,200 Per Piece
20 Pieces (MOQ)
16 Amp Reverse Forward Switch
150 Per Piece
100 Piece (MOQ)
16 Amps Reverse Forward SwitchCopper PartsHeavy BodyPremium FinishHandle Quality is too good
Power Rocker Switch
40 Per Piece
100 Piece (MOQ)
Siemens Make Limit Switch
900 Per piece
1 piece (MOQ)
Disposable Pressure Transducer
920 Per Set
2 Set (MOQ)
Vacuum Cleaner Switch
150 Per Piece
10 Piece (MOQ)
Power rocker
Get Price Quote
JM Electronics offers a wide array of full-sized to miniature illuminated and non-illuminated snap-in Rocker Switches. Ranging from 1 to 4 poles, .4 VA to 20 amp, with many styles of solid colored, translucent, two-color Visi-Rockers. Certifications include UL, CSA, TUV, VDE, and more. Carling Rocker Switches include the V-Series Contura family and L-Series, which set the industry standard for IP66, IP68, and UL1500 ignition protection sealed switches.
Reed Switches
Get Price Quote
We are the leading supplier and trader of Reed Switches in the market. These products are designed by reliable vendors of the market using advanced technology and latest machines with superior grade basic material. Clients can avail our range of reed switches at the most competitive prices.
Over Hoist A2B Crane Limit Switch
3,500 Per Piece
1 Piece (MOQ)
water level switches
Get Price Quote
200 Piece (MOQ)
Float Switch
Get Price Quote
1 Piece (MOQ)
Filter by Localities
